summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorHaojian Zhuang <haojian.zhuang@linaro.org>2016-03-14 13:30:37 +0800
committerLeif Lindholm <leif.lindholm@linaro.org>2016-03-14 13:17:34 +0000
commit727894d5c90f0fc675848d7cc56513589e63a4b7 (patch)
tree74527c20093ea085e1c40d43e8e9be1138f1145e
parent78741ce91e1285c9fbb3ba554f5f968dfca58ede (diff)
downloadedk2-tpm-test.tar.gz
edk2-tpm-test.tar.xz
edk2-tpm-test.zip
ArmPlatformPkg: PL061: support multiple controllertpm-test
Support multiple PL061 controllers. If platform gpio driver couldn't be found, PL061 gpio driver will continue to load PcdPL061GpioBase as the register base. It could be compatible with the use case of current PL061 gpio driver. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
-rw-r--r--ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c141
-rw-r--r--ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf1
-rw-r--r--ArmPlatformPkg/Include/Drivers/PL061Gpio.h46
3 files changed, 129 insertions, 59 deletions
diff --git a/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c b/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c
index 38341a3d05..0e2ea61ce8 100644
--- a/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c
+++ b/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c
@@ -20,6 +20,7 @@
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
#include <Library/PcdLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
@@ -28,6 +29,33 @@
#include <Protocol/EmbeddedGpio.h>
#include <Drivers/PL061Gpio.h>
+PLATFORM_GPIO_CONTROLLER *mPL061PlatformGpio;
+
+EFI_STATUS
+EFIAPI
+PL061Locate (
+ IN EMBEDDED_GPIO_PIN Gpio,
+ OUT UINTN *ControllerIndex,
+ OUT UINTN *ControllerOffset,
+ OUT UINTN *RegisterBase
+ )
+{
+ UINT32 Index;
+
+ for (Index = 0; Index < mPL061PlatformGpio->GpioControllerCount; Index++) {
+ if ( (Gpio >= mPL061PlatformGpio->GpioController[Index].GpioIndex)
+ && (Gpio < mPL061PlatformGpio->GpioController[Index].GpioIndex
+ + mPL061PlatformGpio->GpioController[Index].InternalGpioCount)) {
+ *ControllerIndex = Index;
+ *ControllerOffset = Gpio % mPL061PlatformGpio->GpioController[Index].InternalGpioCount;
+ *RegisterBase = mPL061PlatformGpio->GpioController[Index].RegisterBase;
+ return EFI_SUCCESS;
+ }
+ }
+ DEBUG ((EFI_D_ERROR, "%a, failed to locate gpio %d\n", __func__, Gpio));
+ return EFI_INVALID_PARAMETER;
+}
+
//
// The PL061 is a strange beast. The 8-bit data register is aliased across a
// region 0x400 bytes in size, with bits [9:2] of the address operating as a
@@ -88,20 +116,36 @@ PL061Identify (
VOID
)
{
- // Check if this is a PrimeCell Peripheral
- if ( (MmioRead8 (PL061_GPIO_PCELL_ID0) != 0x0D)
- || (MmioRead8 (PL061_GPIO_PCELL_ID1) != 0xF0)
- || (MmioRead8 (PL061_GPIO_PCELL_ID2) != 0x05)
- || (MmioRead8 (PL061_GPIO_PCELL_ID3) != 0xB1)) {
- return EFI_NOT_FOUND;
+ UINTN Index;
+ UINTN RegisterBase;
+
+ if ( (mPL061PlatformGpio->GpioCount == 0)
+ || (mPL061PlatformGpio->GpioControllerCount == 0)) {
+ return EFI_NOT_FOUND;
}
- // Check if this PrimeCell Peripheral is the PL061 GPIO
- if ( (MmioRead8 (PL061_GPIO_PERIPH_ID0) != 0x61)
- || (MmioRead8 (PL061_GPIO_PERIPH_ID1) != 0x10)
- || ((MmioRead8 (PL061_GPIO_PERIPH_ID2) & 0xF) != 0x04)
- || (MmioRead8 (PL061_GPIO_PERIPH_ID3) != 0x00)) {
- return EFI_NOT_FOUND;
+ for (Index = 0; Index < mPL061PlatformGpio->GpioControllerCount; Index++) {
+ if (mPL061PlatformGpio->GpioController[Index].InternalGpioCount != PL061_GPIO_PINS) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ RegisterBase = mPL061PlatformGpio->GpioController[Index].RegisterBase;
+
+ // Check if this is a PrimeCell Peripheral
+ if ( (MmioRead8 (RegisterBase + PL061_GPIO_PCELL_ID0) != 0x0D)
+ || (MmioRead8 (RegisterBase + PL061_GPIO_PCELL_ID1) != 0xF0)
+ || (MmioRead8 (RegisterBase + PL061_GPIO_PCELL_ID2) != 0x05)
+ || (MmioRead8 (RegisterBase + PL061_GPIO_PCELL_ID3) != 0xB1)) {
+ return EFI_NOT_FOUND;
+ }
+
+ // Check if this PrimeCell Peripheral is the PL061 GPIO
+ if ( (MmioRead8 (RegisterBase + PL061_GPIO_PERIPH_ID0) != 0x61)
+ || (MmioRead8 (RegisterBase + PL061_GPIO_PERIPH_ID1) != 0x10)
+ || ((MmioRead8 (RegisterBase + PL061_GPIO_PERIPH_ID2) & 0xF) != 0x04)
+ || (MmioRead8 (RegisterBase + PL061_GPIO_PERIPH_ID3) != 0x00)) {
+ return EFI_NOT_FOUND;
+ }
}
return EFI_SUCCESS;
@@ -132,13 +176,17 @@ Get (
OUT UINTN *Value
)
{
- if ( (Value == NULL)
- || (Gpio > LAST_GPIO_PIN))
- {
+ EFI_STATUS Status = EFI_SUCCESS;
+ UINTN Index, Offset, RegisterBase;
+
+ Status = PL061Locate (Gpio, &Index, &Offset, &RegisterBase);
+ ASSERT_EFI_ERROR (Status);
+
+ if (Value == NULL) {
return EFI_INVALID_PARAMETER;
}
- if (PL061GetPins (PL061_GPIO_DATA_REG, Gpio)) {
+ if (PL061GetPins (RegisterBase + PL061_GPIO_DATA_REG, Offset)) {
*Value = 1;
} else {
*Value = 0;
@@ -174,41 +222,39 @@ Set (
)
{
EFI_STATUS Status = EFI_SUCCESS;
+ UINTN Index, Offset, RegisterBase;
- // Check for errors
- if (Gpio > LAST_GPIO_PIN) {
- Status = EFI_INVALID_PARAMETER;
- goto EXIT;
- }
+ Status = PL061Locate (Gpio, &Index, &Offset, &RegisterBase);
+ ASSERT_EFI_ERROR (Status);
switch (Mode)
{
case GPIO_MODE_INPUT:
// Set the corresponding direction bit to LOW for input
- MmioAnd8 (PL061_GPIO_DIR_REG, ~GPIO_PIN_MASK(Gpio) & 0xFF);
+ MmioAnd8 (RegisterBase + PL061_GPIO_DIR_REG,
+ ~GPIO_PIN_MASK(Offset) & 0xFF);
break;
case GPIO_MODE_OUTPUT_0:
// Set the corresponding direction bit to HIGH for output
- MmioOr8 (PL061_GPIO_DIR_REG, GPIO_PIN_MASK(Gpio));
+ MmioOr8 (RegisterBase + PL061_GPIO_DIR_REG, GPIO_PIN_MASK(Offset));
// Set the corresponding data bit to LOW for 0
- PL061SetPins (PL061_GPIO_DATA_REG, GPIO_PIN_MASK(Gpio), 0);
+ PL061SetPins (RegisterBase + PL061_GPIO_DATA_REG, GPIO_PIN_MASK(Offset), 0);
break;
case GPIO_MODE_OUTPUT_1:
// Set the corresponding direction bit to HIGH for output
- MmioOr8 (PL061_GPIO_DIR_REG, GPIO_PIN_MASK(Gpio));
+ MmioOr8 (RegisterBase + PL061_GPIO_DIR_REG, GPIO_PIN_MASK(Offset));
// Set the corresponding data bit to HIGH for 1
- PL061SetPins (PL061_GPIO_DATA_REG, GPIO_PIN_MASK(Gpio), 0xff);
- break;
+ PL061SetPins (RegisterBase + PL061_GPIO_DATA_REG, GPIO_PIN_MASK(Offset), 0xff);
+ break;
default:
// Other modes are not supported
return EFI_UNSUPPORTED;
}
-EXIT:
- return Status;
+ return EFI_SUCCESS;
}
/**
@@ -237,16 +283,21 @@ GetMode (
OUT EMBEDDED_GPIO_MODE *Mode
)
{
+ EFI_STATUS Status = EFI_SUCCESS;
+ UINTN Index, Offset, RegisterBase;
+
+ Status = PL061Locate (Gpio, &Index, &Offset, &RegisterBase);
+ ASSERT_EFI_ERROR (Status);
+
// Check for errors
- if ( (Mode == NULL)
- || (Gpio > LAST_GPIO_PIN)) {
+ if (Mode == NULL) {
return EFI_INVALID_PARAMETER;
}
// Check if it is input or output
- if (MmioRead8 (PL061_GPIO_DIR_REG) & GPIO_PIN_MASK(Gpio)) {
+ if (MmioRead8 (RegisterBase + PL061_GPIO_DIR_REG) & GPIO_PIN_MASK(Offset)) {
// Pin set to output
- if (PL061GetPins (PL061_GPIO_DATA_REG, GPIO_PIN_MASK(Gpio))) {
+ if (PL061GetPins (RegisterBase + PL061_GPIO_DATA_REG, GPIO_PIN_MASK(Offset))) {
*Mode = GPIO_MODE_OUTPUT_1;
} else {
*Mode = GPIO_MODE_OUTPUT_0;
@@ -315,14 +366,34 @@ PL061InstallProtocol (
IN EFI_SYSTEM_TABLE *SystemTable
)
{
- EFI_STATUS Status;
- EFI_HANDLE Handle;
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+ GPIO_CONTROLLER *GpioController;
//
// Make sure the Gpio protocol has not been installed in the system yet.
//
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEmbeddedGpioProtocolGuid);
+ Status = gBS->LocateProtocol (&gPlatformGpioProtocolGuid, NULL, (VOID **)&mPL061PlatformGpio);
+ if (EFI_ERROR (Status) && (Status == EFI_NOT_FOUND)) {
+ // Create the mPL061PlatformGpio
+ mPL061PlatformGpio = (PLATFORM_GPIO_CONTROLLER *)AllocateZeroPool (sizeof (PLATFORM_GPIO_CONTROLLER) + sizeof (GPIO_CONTROLLER));
+ if (mPL061PlatformGpio == NULL) {
+ DEBUG ((EFI_D_ERROR, "%a: failed to allocate PLATFORM_GPIO_CONTROLLER\n", __func__));
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ mPL061PlatformGpio->GpioCount = PL061_GPIO_PINS;
+ mPL061PlatformGpio->GpioControllerCount = 1;
+ mPL061PlatformGpio->GpioController = (GPIO_CONTROLLER *)((UINTN) mPL061PlatformGpio + sizeof (PLATFORM_GPIO_CONTROLLER));
+
+ GpioController = mPL061PlatformGpio->GpioController;
+ GpioController->RegisterBase = (UINTN) PcdGet32 (PcdPL061GpioBase);
+ GpioController->GpioIndex = 0;
+ GpioController->InternalGpioCount = PL061_GPIO_PINS;
+ }
+
Status = PL061Identify();
if (EFI_ERROR(Status)) {
return EFI_DEVICE_ERROR;
diff --git a/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf b/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
index 9d9e4cd678..405a3a9994 100644
--- a/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+++ b/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
@@ -45,6 +45,7 @@
[Protocols]
gEmbeddedGpioProtocolGuid
+ gPlatformGpioProtocolGuid
[Depex]
TRUE
diff --git a/ArmPlatformPkg/Include/Drivers/PL061Gpio.h b/ArmPlatformPkg/Include/Drivers/PL061Gpio.h
index 8fde2bb5ef..308f69fa84 100644
--- a/ArmPlatformPkg/Include/Drivers/PL061Gpio.h
+++ b/ArmPlatformPkg/Include/Drivers/PL061Gpio.h
@@ -20,30 +20,28 @@
// PL061 GPIO Registers
#define PL061_GPIO_DATA_REG_OFFSET ((UINTN) 0x000)
-#define PL061_GPIO_DATA_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x000)
-#define PL061_GPIO_DIR_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x400)
-#define PL061_GPIO_IS_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x404)
-#define PL061_GPIO_IBE_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x408)
-#define PL061_GPIO_IEV_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x40C)
-#define PL061_GPIO_IE_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x410)
-#define PL061_GPIO_RIS_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x414)
-#define PL061_GPIO_MIS_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x410)
-#define PL061_GPIO_IC_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x41C)
-#define PL061_GPIO_AFSEL_REG ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0x420)
-
-#define PL061_GPIO_PERIPH_ID0 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFE0)
-#define PL061_GPIO_PERIPH_ID1 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFE4)
-#define PL061_GPIO_PERIPH_ID2 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFE8)
-#define PL061_GPIO_PERIPH_ID3 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFEC)
-
-#define PL061_GPIO_PCELL_ID0 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFF0)
-#define PL061_GPIO_PCELL_ID1 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFF4)
-#define PL061_GPIO_PCELL_ID2 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFF8)
-#define PL061_GPIO_PCELL_ID3 ((UINT32)PcdGet32 (PcdPL061GpioBase) + 0xFFC)
-
-
-// GPIO pins are numbered 0..7
-#define LAST_GPIO_PIN 7
+#define PL061_GPIO_DATA_REG 0x000
+#define PL061_GPIO_DIR_REG 0x400
+#define PL061_GPIO_IS_REG 0x404
+#define PL061_GPIO_IBE_REG 0x408
+#define PL061_GPIO_IEV_REG 0x40C
+#define PL061_GPIO_IE_REG 0x410
+#define PL061_GPIO_RIS_REG 0x414
+#define PL061_GPIO_MIS_REG 0x410
+#define PL061_GPIO_IC_REG 0x41C
+#define PL061_GPIO_AFSEL_REG 0x420
+
+#define PL061_GPIO_PERIPH_ID0 0xFE0
+#define PL061_GPIO_PERIPH_ID1 0xFE4
+#define PL061_GPIO_PERIPH_ID2 0xFE8
+#define PL061_GPIO_PERIPH_ID3 0xFEC
+
+#define PL061_GPIO_PCELL_ID0 0xFF0
+#define PL061_GPIO_PCELL_ID1 0xFF4
+#define PL061_GPIO_PCELL_ID2 0xFF8
+#define PL061_GPIO_PCELL_ID3 0xFFC
+
+#define PL061_GPIO_PINS 8
// All bits low except one bit high, native bit length
#define GPIO_PIN_MASK(Pin) (1UL << ((UINTN)(Pin)))