aboutsummaryrefslogtreecommitdiffstats
path: root/gpxe/src/drivers/net/ath5k/ath5k_reset.c
diff options
context:
space:
mode:
Diffstat (limited to 'gpxe/src/drivers/net/ath5k/ath5k_reset.c')
-rw-r--r--gpxe/src/drivers/net/ath5k/ath5k_reset.c1176
1 files changed, 1176 insertions, 0 deletions
diff --git a/gpxe/src/drivers/net/ath5k/ath5k_reset.c b/gpxe/src/drivers/net/ath5k/ath5k_reset.c
new file mode 100644
index 00000000..dc80093a
--- /dev/null
+++ b/gpxe/src/drivers/net/ath5k/ath5k_reset.c
@@ -0,0 +1,1176 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Lightly modified for gPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+FILE_LICENCE ( MIT );
+
+#define _ATH5K_RESET
+
+/*****************************\
+ Reset functions and helpers
+\*****************************/
+
+#include <gpxe/pci.h> /* To determine if a card is pci-e */
+#include <unistd.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+
+/* Find last set bit; fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32 */
+static int fls(int x)
+{
+ int r = 32;
+
+ if (!x)
+ return 0;
+ if (!(x & 0xffff0000u)) {
+ x <<= 16;
+ r -= 16;
+ }
+ if (!(x & 0xff000000u)) {
+ x <<= 8;
+ r -= 8;
+ }
+ if (!(x & 0xf0000000u)) {
+ x <<= 4;
+ r -= 4;
+ }
+ if (!(x & 0xc0000000u)) {
+ x <<= 2;
+ r -= 2;
+ }
+ if (!(x & 0x80000000u)) {
+ x <<= 1;
+ r -= 1;
+ }
+ return r;
+}
+
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
+ * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
+ *
+ * Since delta slope is floating point we split it on its exponent and
+ * mantissa and provide these values on hw.
+ *
+ * For more infos i think this patent is related
+ * http://www.freepatentsonline.com/7184495.html
+ */
+static int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+ struct net80211_channel *channel)
+{
+ /* Get exponent and mantissa and set it */
+ u32 coef_scaled, coef_exp, coef_man,
+ ds_coef_exp, ds_coef_man, clock;
+
+ if (!(ah->ah_version == AR5K_AR5212) ||
+ !(channel->hw_value & CHANNEL_OFDM)) {
+ DBG("ath5k: attempt to set OFDM timings on non-OFDM channel\n");
+ return -EFAULT;
+ }
+
+ /* Get coefficient
+ * ALGO: coef = (5 * clock * carrier_freq) / 2)
+ * we scale coef by shifting clock value by 24 for
+ * better precision since we use integers */
+ /* TODO: Half/quarter rate */
+ clock = ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);
+
+ coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
+
+ /* Get exponent
+ * ALGO: coef_exp = 14 - highest set bit position */
+ coef_exp = fls(coef_scaled) - 1;
+
+ /* Doesn't make sense if it's zero*/
+ if (!coef_scaled || !coef_exp)
+ return -EINVAL;
+
+ /* Note: we've shifted coef_scaled by 24 */
+ coef_exp = 14 - (coef_exp - 24);
+
+
+ /* Get mantissa (significant digits)
+ * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
+ coef_man = coef_scaled +
+ (1 << (24 - coef_exp - 1));
+
+ /* Calculate delta slope coefficient exponent
+ * and mantissa (remove scaling) and set them on hw */
+ ds_coef_man = coef_man >> (24 - coef_exp);
+ ds_coef_exp = coef_exp - 16;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+ return 0;
+}
+
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static const unsigned int control_rates[] =
+ { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
+/**
+ * ath5k_hw_write_rate_duration - fill rate code to duration table
+ *
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preample
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
+ * quarter rate mode, we need to use another set of bitrates (that's why we
+ * need the mode parameter) but we don't handle these proprietary modes yet.
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+ unsigned int mode __unused)
+{
+ struct ath5k_softc *sc = ah->ah_sc;
+ u16 rate;
+ int i;
+
+ /* Write rate duration table */
+ for (i = 0; i < sc->hwinfo->nr_rates[NET80211_BAND_2GHZ]; i++) {
+ u32 reg;
+ u16 tx_time;
+
+ rate = sc->hwinfo->rates[NET80211_BAND_2GHZ][i];
+
+ /* Set ACK timeout */
+ reg = AR5K_RATE_DUR(ath5k_bitrate_to_hw_rix(rate));
+
+ /* An ACK frame consists of 10 bytes. If you add the FCS,
+ * it's 14 bytes. Note we use the control rate and not the
+ * actual rate for this rate. See mac80211 tx.c
+ * ieee80211_duration() for a brief description of
+ * what rate we should choose to TX ACKs. */
+ tx_time = net80211_duration(sc->dev, 14, rate);
+
+ ath5k_hw_reg_write(ah, tx_time, reg);
+
+ if (rate != 20 && rate != 55 && rate != 110)
+ continue;
+
+ /*
+ * We're not distinguishing short preamble here,
+ * This is true, all we'll get is a longer value here
+ * which is not necessarilly bad.
+ */
+ ath5k_hw_reg_write(ah, tx_time,
+ reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+ }
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+ int ret;
+ u32 mask = val ? val : ~0U;
+
+ /* Read-and-clear RX Descriptor Pointer*/
+ ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+ /*
+ * Reset the device and wait until success
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+ /* Wait at least 128 PCI clocks */
+ udelay(15);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ } else {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ }
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, 0);
+
+ /*
+ * Reset configuration register (for hw byte-swap). Note that this
+ * is only set for big endian. We do the necessary magic in
+ * AR5K_INIT_CFG.
+ */
+ if ((val & AR5K_RESET_CTL_PCU) == 0)
+ ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+ return ret;
+}
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_wake(struct ath5k_hw *ah)
+{
+ unsigned int i;
+ u32 staid, data;
+
+ staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+ staid &= ~AR5K_STA_ID1_PWR_SV;
+
+ /* Preserve sleep duration */
+ data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+ if (data & 0xffc00000)
+ data = 0;
+ else
+ data = data & 0xfffcffff;
+
+ ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ udelay(15);
+
+ for (i = 50; i > 0; i--) {
+ /* Check if the chip did wake up */
+ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_SPWR_DN) == 0)
+ break;
+
+ /* Wait a bit and retry */
+ udelay(200);
+ ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ }
+
+ /* Fail if the chip didn't wake up */
+ if (i <= 0)
+ return -EIO;
+
+ ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/*
+ * Bring up MAC + PHY Chips and program PLL
+ * TODO: Half/Quarter rate support
+ */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, int initial __unused)
+{
+ struct pci_device *pdev = ah->ah_sc->pdev;
+ u32 turbo, mode, clock, bus_flags;
+ int ret;
+
+ turbo = 0;
+ mode = 0;
+ clock = 0;
+
+ /* Wakeup the device */
+ ret = ath5k_hw_wake(ah);
+ if (ret) {
+ DBG("ath5k: failed to wake up the MAC chip\n");
+ return ret;
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Get channel mode flags
+ */
+
+ if (ah->ah_radio >= AR5K_RF5112) {
+ mode = AR5K_PHY_MODE_RAD_RF5112;
+ clock = AR5K_PHY_PLL_RF5112;
+ } else {
+ mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/
+ clock = AR5K_PHY_PLL_RF5111; /*Zero*/
+ }
+
+ if (flags & CHANNEL_2GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+ clock |= AR5K_PHY_PLL_44MHZ;
+
+ if (flags & CHANNEL_CCK) {
+ mode |= AR5K_PHY_MODE_MOD_CCK;
+ } else if (flags & CHANNEL_OFDM) {
+ /* XXX Dynamic OFDM/CCK is not supported by the
+ * AR5211 so we set MOD_OFDM for plain g (no
+ * CCK headers) operation. We need to test
+ * this, 5211 might support ofdm-only g after
+ * all, there are also initial register values
+ * in the code for g mode (see initvals.c). */
+ if (ah->ah_version == AR5K_AR5211)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else
+ mode |= AR5K_PHY_MODE_MOD_DYN;
+ } else {
+ DBG("ath5k: invalid radio modulation mode\n");
+ return -EINVAL;
+ }
+ } else if (flags & CHANNEL_5GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+
+ if (ah->ah_radio == AR5K_RF5413)
+ clock = AR5K_PHY_PLL_40MHZ_5413;
+ else
+ clock |= AR5K_PHY_PLL_40MHZ;
+
+ if (flags & CHANNEL_OFDM)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else {
+ DBG("ath5k: invalid radio modulation mode\n");
+ return -EINVAL;
+ }
+ } else {
+ DBG("ath5k: invalid radio frequency mode\n");
+ return -EINVAL;
+ }
+
+ if (flags & CHANNEL_TURBO)
+ turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+ } else { /* Reset the device */
+
+ /* ...enable Atheros turbo mode if requested */
+ if (flags & CHANNEL_TURBO)
+ ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+ AR5K_PHY_TURBO);
+ }
+
+ /* reseting PCI on PCI-E cards results card to hang
+ * and always return 0xffff... so we ingore that flag
+ * for PCI-E cards */
+ if (pci_find_capability(pdev, PCI_CAP_ID_EXP))
+ bus_flags = 0;
+ else
+ bus_flags = AR5K_RESET_CTL_PCI;
+
+ /* Reset chipset */
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+ if (ret) {
+ DBG("ath5k: failed to reset the MAC chip\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!*/
+ ret = ath5k_hw_wake(ah);
+ if (ret) {
+ DBG("ath5k: failed to resume the MAC chip\n");
+ return ret;
+ }
+
+ /* ...final warm reset */
+ if (ath5k_hw_nic_reset(ah, 0)) {
+ DBG("ath5k: failed to warm reset the MAC chip\n");
+ return -EIO;
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+
+ /* ...update PLL if needed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
+ ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+ udelay(300);
+ }
+
+ /* ...set the PHY operating mode */
+ ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+ ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+ }
+
+ return 0;
+}
+
+static int ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct net80211_channel *channel)
+{
+ u8 refclk_freq;
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ refclk_freq = 40;
+ else
+ refclk_freq = 32;
+
+ if ((channel->center_freq % refclk_freq != 0) &&
+ ((channel->center_freq % refclk_freq < 10) ||
+ (channel->center_freq % refclk_freq > 22)))
+ return 1;
+ else
+ return 0;
+}
+
+/* TODO: Half/Quarter rate */
+static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
+ struct net80211_channel *channel)
+{
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+
+ /* Setup ADC control */
+ ath5k_hw_reg_write(ah,
+ (AR5K_REG_SM(2,
+ AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
+ AR5K_REG_SM(2,
+ AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
+ AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
+ AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
+ AR5K_PHY_ADC_CTL);
+
+
+
+ /* Disable barker RSSI threshold */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+ AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+ AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
+
+ /* Set the mute mask */
+ ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+ }
+
+ /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
+
+ /* Enable DCU double buffering */
+ if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_DCU_DBL_BUF_DIS);
+
+ /* Set DAC/ADC delays */
+ if (ah->ah_version == AR5K_AR5212) {
+ u32 scal;
+ if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+ scal = AR5K_PHY_SCAL_32MHZ_2417;
+ else if (ath5k_eeprom_is_hb63(ah))
+ scal = AR5K_PHY_SCAL_32MHZ_HB63;
+ else
+ scal = AR5K_PHY_SCAL_32MHZ;
+ ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+ }
+
+ /* Set fast ADC */
+ if ((ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+ u32 fast_adc = 1;
+
+ if (channel->center_freq == 2462 ||
+ channel->center_freq == 2467)
+ fast_adc = 0;
+
+ /* Only update if needed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
+ ath5k_hw_reg_write(ah, fast_adc,
+ AR5K_PHY_FAST_ADC);
+ }
+
+ /* Fix for first revision of the RF5112 RF chipset */
+ if (ah->ah_radio == AR5K_RF5112 &&
+ ah->ah_radio_5ghz_revision <
+ AR5K_SREV_RAD_5112A) {
+ u32 data;
+ ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+ AR5K_PHY_CCKTXCTL);
+ if (channel->hw_value & CHANNEL_5GHZ)
+ data = 0xffb81020;
+ else
+ data = 0xffb80d20;
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+ }
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ u32 usec_reg;
+ /* 5311 has different tx/rx latency masks
+ * from 5211, since we deal 5311 the same
+ * as 5211 when setting initvals, shift
+ * values here to their proper locations */
+ usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+ ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
+ AR5K_USEC_32 |
+ AR5K_USEC_TX_LATENCY_5211 |
+ AR5K_REG_SM(29,
+ AR5K_USEC_RX_LATENCY_5210)),
+ AR5K_USEC_5211);
+ /* Clear QCU/DCU clock gating register */
+ ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
+ /* Set DAC/ADC delays */
+ ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
+ /* Enable PCU FIFO corruption ECO */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_ECO_ENABLE);
+ }
+}
+
+static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
+ struct net80211_channel *channel, u8 *ant, u8 ee_mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ s16 cck_ofdm_pwr_delta;
+
+ /* Adjust power delta for channel 14 */
+ if (channel->center_freq == 2484)
+ cck_ofdm_pwr_delta =
+ ((ee->ee_cck_ofdm_power_delta -
+ ee->ee_scaled_cck_delta) * 2) / 10;
+ else
+ cck_ofdm_pwr_delta =
+ (ee->ee_cck_ofdm_power_delta * 2) / 10;
+
+ /* Set CCK to OFDM power delta on tx power
+ * adjustment register */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+ if (channel->hw_value == CHANNEL_G)
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
+ AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
+ AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
+ AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
+ AR5K_PHY_TX_PWR_ADJ);
+ else
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
+ } else {
+ /* For older revs we scale power on sw during tx power
+ * setup */
+ ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
+ ah->ah_txpower.txp_cck_ofdm_gainf_delta =
+ ee->ee_cck_ofdm_gain_delta;
+ }
+
+ /* Set antenna idle switch table */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
+ AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
+ (ah->ah_antenna[ee_mode][0] |
+ AR5K_PHY_ANT_CTL_TXRX_EN));
+
+ /* Set antenna switch table */
+ ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+ AR5K_PHY_ANT_SWITCH_TABLE_0);
+ ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+ AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+ /* Noise floor threshold */
+ ath5k_hw_reg_write(ah,
+ AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+ AR5K_PHY_NFTHRES);
+
+ if ((channel->hw_value & CHANNEL_TURBO) &&
+ (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
+ /* Switch settling time (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ ee->ee_switch_settling_turbo[ee_mode]);
+
+ /* Tx/Rx attenuation (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+ AR5K_PHY_GAIN_TXRX_ATTEN,
+ ee->ee_atn_tx_rx_turbo[ee_mode]);
+
+ /* ADC/PGA desired size (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_ADC,
+ ee->ee_adc_desired_size_turbo[ee_mode]);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_PGA,
+ ee->ee_pga_desired_size_turbo[ee_mode]);
+
+ /* Tx/Rx margin (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx_turbo[ee_mode]);
+
+ } else {
+ /* Switch settling time */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ ee->ee_switch_settling[ee_mode]);
+
+ /* Tx/Rx attenuation */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+ AR5K_PHY_GAIN_TXRX_ATTEN,
+ ee->ee_atn_tx_rx[ee_mode]);
+
+ /* ADC/PGA desired size */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_ADC,
+ ee->ee_adc_desired_size[ee_mode]);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_PGA,
+ ee->ee_pga_desired_size[ee_mode]);
+
+ /* Tx/Rx margin */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx[ee_mode]);
+ }
+
+ /* XPA delays */
+ ath5k_hw_reg_write(ah,
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+ /* XLNA delay */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
+ AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
+ ee->ee_tx_end2xlna_enable[ee_mode]);
+
+ /* Thresh64 (ANI) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
+ AR5K_PHY_NF_THRESH62,
+ ee->ee_thr_62[ee_mode]);
+
+
+ /* False detect backoff for channels
+ * that have spur noise. Write the new
+ * cyclic power RSSI threshold. */
+ if (ath5k_hw_chan_has_spur_noise(ah, channel))
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+ AR5K_INIT_CYCRSSI_THR1 +
+ ee->ee_false_detect[ee_mode]);
+ else
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+ AR5K_INIT_CYCRSSI_THR1);
+
+ /* I/Q correction
+ * TODO: Per channel i/q infos ? */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CORR_ENABLE |
+ (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+ ee->ee_q_cal[ee_mode]);
+
+ /* Heavy clipping -disable for now */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
+
+ return;
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah,
+ struct net80211_channel *channel, int change_channel)
+{
+ u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
+ u32 phy_tst1;
+ u8 mode, freq, ee_mode, ant[2];
+ int i, ret;
+
+ s_ant = 0;
+ ee_mode = 0;
+ staid1_flags = 0;
+ tsf_up = 0;
+ tsf_lo = 0;
+ freq = 0;
+ mode = 0;
+
+ /*
+ * Save some registers before a reset
+ */
+ /*DCU/Antenna selection not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ mode = AR5K_MODE_11A;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
+ mode = AR5K_MODE_11G;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
+ mode = AR5K_MODE_11B;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ case CHANNEL_T:
+ mode = AR5K_MODE_11A_TURBO;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_TG:
+ if (ah->ah_version == AR5K_AR5211) {
+ DBG("ath5k: TurboG not available on 5211\n");
+ return -EINVAL;
+ }
+ mode = AR5K_MODE_11G_TURBO;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_XR:
+ if (ah->ah_version == AR5K_AR5211) {
+ DBG("ath5k: XR mode not available on 5211\n");
+ return -EINVAL;
+ }
+ mode = AR5K_MODE_XR;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ default:
+ DBG("ath5k: invalid channel (%d MHz)\n",
+ channel->center_freq);
+ return -EINVAL;
+ }
+
+ if (change_channel) {
+ /*
+ * Save frame sequence count
+ * For revs. after Oahu, only save
+ * seq num for DCU 0 (Global seq num)
+ */
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+ for (i = 0; i < 10; i++)
+ s_seq[i] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(i));
+
+ } else {
+ s_seq[0] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+ }
+
+ /* Save default antenna */
+ s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+
+ if (ah->ah_version == AR5K_AR5212) {
+ /* Since we are going to write rf buffer
+ * check if we have any pending gain_F
+ * optimization settings */
+ if (change_channel && ah->ah_rf_banks != NULL)
+ ath5k_hw_gainf_calibrate(ah);
+ }
+ }
+
+ /*GPIOs*/
+ s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_LEDSTATE;
+ s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+ s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+ /* AR5K_STA_ID1 flags, only preserve antenna
+ * settings and ack/cts rate mode */
+ staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
+ (AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_DESC_ANTENNA |
+ AR5K_STA_ID1_RTS_DEF_ANTENNA |
+ AR5K_STA_ID1_ACKCTS_6MB |
+ AR5K_STA_ID1_BASE_RATE_11B |
+ AR5K_STA_ID1_SELFGEN_DEF_ANT);
+
+ /* Wakeup the device */
+ ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, 0);
+ if (ret)
+ return ret;
+
+ /* PHY access enable */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+ else
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
+ AR5K_PHY(0));
+
+ /* Write initial settings */
+ ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+ if (ret)
+ return ret;
+
+ /*
+ * 5211/5212 Specific
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+
+ /*
+ * Write initial RF gain settings
+ * This should work for both 5111/5112
+ */
+ ret = ath5k_hw_rfgain_init(ah, freq);
+ if (ret)
+ return ret;
+
+ mdelay(1);
+
+ /*
+ * Tweak initval settings for revised
+ * chipsets and add some more config
+ * bits
+ */
+ ath5k_hw_tweak_initval_settings(ah, channel);
+
+ /*
+ * Set TX power (FIXME)
+ */
+ ret = ath5k_hw_txpower(ah, channel, ee_mode,
+ AR5K_TUNE_DEFAULT_TXPOWER);
+ if (ret)
+ return ret;
+
+ /* Write rate duration table only on AR5212 */
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_write_rate_duration(ah, mode);
+
+ /*
+ * Write RF buffer
+ */
+ ret = ath5k_hw_rfregs_init(ah, channel, mode);
+ if (ret)
+ return ret;
+
+
+ /* Write OFDM timings on 5212*/
+ if (ah->ah_version == AR5K_AR5212 &&
+ channel->hw_value & CHANNEL_OFDM) {
+ ret = ath5k_hw_write_ofdm_timings(ah, channel);
+ if (ret)
+ return ret;
+ }
+
+ /*Enable/disable 802.11b mode on 5111
+ (enable 2111 frequency converter + CCK)*/
+ if (ah->ah_radio == AR5K_RF5111) {
+ if (mode == AR5K_MODE_11B)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ }
+
+ /*
+ * In case a fixed antenna was set as default
+ * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+ * registers.
+ */
+ if (s_ant != 0) {
+ if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+ ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+ else /* 2 - Aux */
+ ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+ } else {
+ ant[0] = AR5K_ANT_FIXED_A;
+ ant[1] = AR5K_ANT_FIXED_B;
+ }
+
+ /* Commit values from EEPROM */
+ ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);
+
+ } else {
+ /*
+ * For 5210 we do all initialization using
+ * initvals, so we don't have to modify
+ * any settings (5210 also only supports
+ * a/aturbo modes)
+ */
+ mdelay(1);
+ /* Disable phy and wait */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+ mdelay(1);
+ }
+
+ /*
+ * Restore saved values
+ */
+
+ /*DCU/Antenna selection not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+
+ if (change_channel) {
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ for (i = 0; i < 10; i++)
+ ath5k_hw_reg_write(ah, s_seq[i],
+ AR5K_QUEUE_DCU_SEQNUM(i));
+ } else {
+ ath5k_hw_reg_write(ah, s_seq[0],
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+ }
+
+ ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+ }
+
+ /* Ledstate */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+
+ /* Gpio settings */
+ ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+ ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+ /* Restore sta_id flags and preserve our mac address*/
+ ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
+ AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
+ AR5K_STA_ID1);
+
+
+ /*
+ * Configure PCU
+ */
+
+ /* Restore bssid and bssid mask */
+ /* XXX: add ah->aid once mac80211 gives this to us */
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+ /* Set PCU config */
+ ath5k_hw_set_opmode(ah);
+
+ /* Clear any pending interrupts
+ * PISR/SISR Not available on 5210 */
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+
+ /* Set RSSI/BRSSI thresholds
+ *
+ * Note: If we decide to set this value
+ * dynamicaly, have in mind that when AR5K_RSSI_THR
+ * register is read it might return 0x40 if we haven't
+ * wrote anything to it plus BMISS RSSI threshold is zeroed.
+ * So doing a save/restore procedure here isn't the right
+ * choice. Instead store it on ath5k_hw */
+ ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+ AR5K_TUNE_BMISS_THRES <<
+ AR5K_RSSI_THR_BMISS_S),
+ AR5K_RSSI_THR);
+
+ /* MIC QoS support */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+ ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+ ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+ }
+
+ /* QoS NOACK Policy */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+ AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) |
+ AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+ AR5K_QOS_NOACK);
+ }
+
+
+ /*
+ * Configure PHY
+ */
+
+ /* Set channel on PHY */
+ ret = ath5k_hw_channel(ah, channel);
+ if (ret)
+ return ret;
+
+ /*
+ * Enable the PHY and wait until completion
+ * This includes BaseBand and Synthesizer
+ * activation.
+ */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+ /*
+ * On 5211+ read activation -> rx delay
+ * and use it.
+ *
+ * TODO: Half/quarter rate support
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ u32 delay;
+ delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+ AR5K_PHY_RX_DELAY_M;
+ delay = (channel->hw_value & CHANNEL_CCK) ?
+ ((delay << 2) / 22) : (delay / 10);
+
+ udelay(100 + (2 * delay));
+ } else {
+ mdelay(1);
+ }
+
+ /*
+ * Perform ADC test to see if baseband is ready
+ * Set tx hold and check adc test register
+ */
+ phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+ ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+ for (i = 0; i <= 20; i++) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+ break;
+ udelay(200);
+ }
+ ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+
+ /*
+ * Start automatic gain control calibration
+ *
+ * During AGC calibration RX path is re-routed to
+ * a power detector so we don't receive anything.
+ *
+ * This method is used to calibrate some static offsets
+ * used together with on-the fly I/Q calibration (the
+ * one performed via ath5k_hw_phy_calibrate), that doesn't
+ * interrupt rx path.
+ *
+ * While rx path is re-routed to the power detector we also
+ * start a noise floor calibration, to measure the
+ * card's noise floor (the noise we measure when we are not
+ * transmiting or receiving anything).
+ *
+ * If we are in a noisy environment AGC calibration may time
+ * out and/or noise floor calibration might timeout.
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL);
+
+ /* At the same time start I/Q calibration for QAM constellation
+ * -no need for CCK- */
+ ah->ah_calibration = 0;
+ if (!(mode == AR5K_MODE_11B)) {
+ ah->ah_calibration = 1;
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_RUN);
+ }
+
+ /* Wait for gain calibration to finish (we check for I/Q calibration
+ * during ath5k_phy_calibrate) */
+ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL, 0, 0)) {
+ DBG("ath5k: gain calibration timeout (%d MHz)\n",
+ channel->center_freq);
+ }
+
+ /*
+ * If we run NF calibration before AGC, it always times out.
+ * Binary HAL starts NF and AGC calibration at the same time
+ * and only waits for AGC to finish. Also if AGC or NF cal.
+ * times out, reset doesn't fail on binary HAL. I believe
+ * that's wrong because since rx path is routed to a detector,
+ * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
+ * enables noise floor calibration after offset calibration and if noise
+ * floor calibration fails, reset fails. I believe that's
+ * a better approach, we just need to find a polling interval
+ * that suits best, even if reset continues we need to make
+ * sure that rx path is ready.
+ */
+ ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+
+
+ /*
+ * Configure QCUs/DCUs
+ */
+
+ /* TODO: HW Compression support for data queues */
+ /* TODO: Burst prefetch for data queues */
+
+ /*
+ * Reset queues and start beacon timers at the end of the reset routine
+ * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
+ * Note: If we want we can assign multiple qcus on one dcu.
+ */
+ ret = ath5k_hw_reset_tx_queue(ah);
+ if (ret) {
+ DBG("ath5k: failed to reset TX queue\n");
+ return ret;
+ }
+
+ /*
+ * Configure DMA/Interrupts
+ */
+
+ /*
+ * Set Rx/Tx DMA Configuration
+ *
+ * Set standard DMA size (128). Note that
+ * a DMA size of 512 causes rx overruns and tx errors
+ * on pci-e cards (tested on 5424 but since rx overruns
+ * also occur on 5416/5418 with madwifi we set 128
+ * for all PCI-E cards to be safe).
+ *
+ * XXX: need to check 5210 for this
+ * TODO: Check out tx triger level, it's always 64 on dumps but I
+ * guess we can tweak it and see how it goes ;-)
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
+ AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+ AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
+ }
+
+ /* Pre-enable interrupts on 5211/5212*/
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_set_imr(ah, ah->ah_imr);
+
+ /*
+ * Setup RFKill interrupt if rfkill flag is set on eeprom.
+ * TODO: Use gpio pin and polarity infos from eeprom
+ * TODO: Handle this in ath5k_intr because it'll result
+ * a nasty interrupt storm.
+ */
+#if 0
+ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+ ath5k_hw_set_gpio_input(ah, 0);
+ ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+ if (ah->ah_gpio[0] == 0)
+ ath5k_hw_set_gpio_intr(ah, 0, 1);
+ else
+ ath5k_hw_set_gpio_intr(ah, 0, 0);
+ }
+#endif
+
+ /*
+ * Disable beacons and reset the register
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+ AR5K_BEACON_RESET_TSF);
+
+ return 0;
+}
+
+#undef _ATH5K_RESET