aboutsummaryrefslogtreecommitdiffstats
path: root/gpxe/src/drivers/net/ath5k/ath5k.c
diff options
context:
space:
mode:
Diffstat (limited to 'gpxe/src/drivers/net/ath5k/ath5k.c')
-rw-r--r--gpxe/src/drivers/net/ath5k/ath5k.c1700
1 files changed, 1700 insertions, 0 deletions
diff --git a/gpxe/src/drivers/net/ath5k/ath5k.c b/gpxe/src/drivers/net/ath5k/ath5k.c
new file mode 100644
index 00000000..37defce2
--- /dev/null
+++ b/gpxe/src/drivers/net/ath5k/ath5k.c
@@ -0,0 +1,1700 @@
+/*
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * Modified for gPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>
+ * Original from Linux kernel 2.6.30.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+FILE_LICENCE ( BSD3 );
+
+#include <stdlib.h>
+#include <gpxe/malloc.h>
+#include <gpxe/timer.h>
+#include <gpxe/netdevice.h>
+#include <gpxe/pci.h>
+#include <gpxe/pci_io.h>
+
+#include "base.h"
+#include "reg.h"
+
+#define ATH5K_CALIB_INTERVAL 10 /* Calibrate PHY every 10 seconds */
+#define ATH5K_RETRIES 4 /* Number of times to retry packet sends */
+#define ATH5K_DESC_ALIGN 16 /* Alignment for TX/RX descriptors */
+
+/******************\
+* Internal defines *
+\******************/
+
+/* Known PCI ids */
+static struct pci_device_id ath5k_nics[] = {
+ PCI_ROM(0x168c, 0x0207, "ath5210e", "Atheros 5210 early", AR5K_AR5210),
+ PCI_ROM(0x168c, 0x0007, "ath5210", "Atheros 5210", AR5K_AR5210),
+ PCI_ROM(0x168c, 0x0011, "ath5311", "Atheros 5311 (AHB)", AR5K_AR5211),
+ PCI_ROM(0x168c, 0x0012, "ath5211", "Atheros 5211", AR5K_AR5211),
+ PCI_ROM(0x168c, 0x0013, "ath5212", "Atheros 5212", AR5K_AR5212),
+ PCI_ROM(0xa727, 0x0013, "ath5212c","3com Ath 5212", AR5K_AR5212),
+ PCI_ROM(0x10b7, 0x0013, "rdag675", "3com 3CRDAG675", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x1014, "ath5212m", "Ath 5212 miniPCI", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x0014, "ath5212x14", "Atheros 5212 x14", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x0015, "ath5212x15", "Atheros 5212 x15", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x0016, "ath5212x16", "Atheros 5212 x16", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x0017, "ath5212x17", "Atheros 5212 x17", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x0018, "ath5212x18", "Atheros 5212 x18", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x0019, "ath5212x19", "Atheros 5212 x19", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x001a, "ath2413", "Atheros 2413 Griffin", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x001b, "ath5413", "Atheros 5413 Eagle", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x001c, "ath5212e", "Atheros 5212 PCI-E", AR5K_AR5212),
+ PCI_ROM(0x168c, 0x001d, "ath2417", "Atheros 2417 Nala", AR5K_AR5212),
+};
+
+/* Known SREVs */
+static const struct ath5k_srev_name srev_names[] = {
+ { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
+ { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
+ { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
+ { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
+ { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
+ { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
+ { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
+ { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
+ { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
+ { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
+ { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
+ { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
+ { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
+ { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
+ { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
+ { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
+ { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
+ { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+ { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
+ { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
+ { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
+ { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
+ { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
+ { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
+ { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
+ { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
+ { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
+ { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
+ { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
+ { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
+ { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+ { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
+ { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+ { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
+};
+
+#define ATH5K_SPMBL_NO 1
+#define ATH5K_SPMBL_YES 2
+#define ATH5K_SPMBL_BOTH 3
+
+static const struct {
+ u16 bitrate;
+ u8 short_pmbl;
+ u8 hw_code;
+} ath5k_rates[] = {
+ { 10, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_1M },
+ { 20, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_2M },
+ { 55, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_5_5M },
+ { 110, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_11M },
+ { 60, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_6M },
+ { 90, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_9M },
+ { 120, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_12M },
+ { 180, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_18M },
+ { 240, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_24M },
+ { 360, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_36M },
+ { 480, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_48M },
+ { 540, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_54M },
+ { 20, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE },
+ { 55, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE },
+ { 110, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE },
+ { 0, 0, 0 },
+};
+
+#define ATH5K_NR_RATES 15
+
+/*
+ * Prototypes - PCI stack related functions
+ */
+static int ath5k_probe(struct pci_device *pdev,
+ const struct pci_device_id *id);
+static void ath5k_remove(struct pci_device *pdev);
+
+struct pci_driver ath5k_pci_driver __pci_driver = {
+ .ids = ath5k_nics,
+ .id_count = sizeof(ath5k_nics) / sizeof(ath5k_nics[0]),
+ .probe = ath5k_probe,
+ .remove = ath5k_remove,
+};
+
+
+
+/*
+ * Prototypes - MAC 802.11 stack related functions
+ */
+static int ath5k_tx(struct net80211_device *dev, struct io_buffer *skb);
+static int ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan);
+static int ath5k_reset_wake(struct ath5k_softc *sc);
+static int ath5k_start(struct net80211_device *dev);
+static void ath5k_stop(struct net80211_device *dev);
+static int ath5k_config(struct net80211_device *dev, int changed);
+static void ath5k_poll(struct net80211_device *dev);
+static void ath5k_irq(struct net80211_device *dev, int enable);
+
+static struct net80211_device_operations ath5k_ops = {
+ .open = ath5k_start,
+ .close = ath5k_stop,
+ .transmit = ath5k_tx,
+ .poll = ath5k_poll,
+ .irq = ath5k_irq,
+ .config = ath5k_config,
+};
+
+/*
+ * Prototypes - Internal functions
+ */
+/* Attach detach */
+static int ath5k_attach(struct net80211_device *dev);
+static void ath5k_detach(struct net80211_device *dev);
+/* Channel/mode setup */
+static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
+ struct net80211_channel *channels,
+ unsigned int mode,
+ unsigned int max);
+static int ath5k_setup_bands(struct net80211_device *dev);
+static int ath5k_chan_set(struct ath5k_softc *sc,
+ struct net80211_channel *chan);
+static void ath5k_setcurmode(struct ath5k_softc *sc,
+ unsigned int mode);
+static void ath5k_mode_setup(struct ath5k_softc *sc);
+
+/* Descriptor setup */
+static int ath5k_desc_alloc(struct ath5k_softc *sc);
+static void ath5k_desc_free(struct ath5k_softc *sc);
+/* Buffers setup */
+static int ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf);
+static int ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf);
+
+static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
+ struct ath5k_buf *bf)
+{
+ if (!bf->iob)
+ return;
+
+ net80211_tx_complete(sc->dev, bf->iob, 0, ECANCELED);
+ bf->iob = NULL;
+}
+
+static inline void ath5k_rxbuf_free(struct ath5k_softc *sc __unused,
+ struct ath5k_buf *bf)
+{
+ free_iob(bf->iob);
+ bf->iob = NULL;
+}
+
+/* Queues setup */
+static int ath5k_txq_setup(struct ath5k_softc *sc,
+ int qtype, int subtype);
+static void ath5k_txq_drainq(struct ath5k_softc *sc,
+ struct ath5k_txq *txq);
+static void ath5k_txq_cleanup(struct ath5k_softc *sc);
+static void ath5k_txq_release(struct ath5k_softc *sc);
+/* Rx handling */
+static int ath5k_rx_start(struct ath5k_softc *sc);
+static void ath5k_rx_stop(struct ath5k_softc *sc);
+/* Tx handling */
+static void ath5k_tx_processq(struct ath5k_softc *sc,
+ struct ath5k_txq *txq);
+
+/* Interrupt handling */
+static int ath5k_init(struct ath5k_softc *sc);
+static int ath5k_stop_hw(struct ath5k_softc *sc);
+
+static void ath5k_calibrate(struct ath5k_softc *sc);
+
+/* Filter */
+static void ath5k_configure_filter(struct ath5k_softc *sc);
+
+/********************\
+* PCI Initialization *
+\********************/
+
+#if DBGLVL_MAX
+static const char *
+ath5k_chip_name(enum ath5k_srev_type type, u16 val)
+{
+ const char *name = "xxxxx";
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
+ if (srev_names[i].sr_type != type)
+ continue;
+
+ if ((val & 0xf0) == srev_names[i].sr_val)
+ name = srev_names[i].sr_name;
+
+ if ((val & 0xff) == srev_names[i].sr_val) {
+ name = srev_names[i].sr_name;
+ break;
+ }
+ }
+
+ return name;
+}
+#endif
+
+static int ath5k_probe(struct pci_device *pdev,
+ const struct pci_device_id *id)
+{
+ void *mem;
+ struct ath5k_softc *sc;
+ struct net80211_device *dev;
+ int ret;
+ u8 csz;
+
+ adjust_pci_device(pdev);
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+ if (csz == 0) {
+ /*
+ * We must have this setup properly for rx buffer
+ * DMA to work so force a reasonable value here if it
+ * comes up zero.
+ */
+ csz = 16;
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+ }
+ /*
+ * The default setting of latency timer yields poor results,
+ * set it to the value used by other systems. It may be worth
+ * tweaking this setting more.
+ */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ mem = ioremap(pdev->membase, 0x10000);
+ if (!mem) {
+ DBG("ath5k: cannot remap PCI memory region\n");
+ ret = -EIO;
+ goto err;
+ }
+
+ /*
+ * Allocate dev (net80211 main struct)
+ * and dev->priv (driver private data)
+ */
+ dev = net80211_alloc(sizeof(*sc));
+ if (!dev) {
+ DBG("ath5k: cannot allocate 802.11 device\n");
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ /* Initialize driver private data */
+ sc = dev->priv;
+ sc->dev = dev;
+ sc->pdev = pdev;
+
+ sc->hwinfo = zalloc(sizeof(*sc->hwinfo));
+ if (!sc->hwinfo) {
+ DBG("ath5k: cannot allocate 802.11 hardware info structure\n");
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ sc->hwinfo->flags = NET80211_HW_RX_HAS_FCS;
+ sc->hwinfo->signal_type = NET80211_SIGNAL_DB;
+ sc->hwinfo->signal_max = 40; /* 35dB should give perfect 54Mbps */
+ sc->hwinfo->channel_change_time = 5000;
+
+ /* Avoid working with the device until setup is complete */
+ sc->status |= ATH_STAT_INVALID;
+
+ sc->iobase = mem;
+ sc->cachelsz = csz * 4; /* convert to bytes */
+
+ DBG("ath5k: register base at %p (%08lx)\n", sc->iobase, pdev->membase);
+ DBG("ath5k: cache line size %d\n", sc->cachelsz);
+
+ /* Set private data */
+ pci_set_drvdata(pdev, dev);
+ dev->netdev->dev = (struct device *)pdev;
+
+ /* Initialize device */
+ ret = ath5k_hw_attach(sc, id->driver_data, &sc->ah);
+ if (ret)
+ goto err_free_hwinfo;
+
+ /* Finish private driver data initialization */
+ ret = ath5k_attach(dev);
+ if (ret)
+ goto err_ah;
+
+#if DBGLVL_MAX
+ DBG("Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
+ sc->ah->ah_mac_srev, sc->ah->ah_phy_revision);
+
+ if (!sc->ah->ah_single_chip) {
+ /* Single chip radio (!RF5111) */
+ if (sc->ah->ah_radio_5ghz_revision &&
+ !sc->ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A)) {
+ DBG("RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some
+ * 5Ghz only cards) -> report 5Ghz radio */
+ } else if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B)) {
+ DBG("RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ DBG("RF%s multiband radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) ->
+ * report both 2GHz/5GHz radios */
+ else if (sc->ah->ah_radio_5ghz_revision &&
+ sc->ah->ah_radio_2ghz_revision) {
+ DBG("RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ DBG("RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_2ghz_revision),
+ sc->ah->ah_radio_2ghz_revision);
+ }
+ }
+#endif
+
+ /* Ready to go */
+ sc->status &= ~ATH_STAT_INVALID;
+
+ return 0;
+err_ah:
+ ath5k_hw_detach(sc->ah);
+err_free_hwinfo:
+ free(sc->hwinfo);
+err_free:
+ net80211_free(dev);
+err_map:
+ iounmap(mem);
+err:
+ return ret;
+}
+
+static void ath5k_remove(struct pci_device *pdev)
+{
+ struct net80211_device *dev = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = dev->priv;
+
+ ath5k_detach(dev);
+ ath5k_hw_detach(sc->ah);
+ iounmap(sc->iobase);
+ free(sc->hwinfo);
+ net80211_free(dev);
+}
+
+
+/***********************\
+* Driver Initialization *
+\***********************/
+
+static int
+ath5k_attach(struct net80211_device *dev)
+{
+ struct ath5k_softc *sc = dev->priv;
+ struct ath5k_hw *ah = sc->ah;
+ int ret;
+
+ /*
+ * Collect the channel list. The 802.11 layer
+ * is resposible for filtering this list based
+ * on settings like the phy mode and regulatory
+ * domain restrictions.
+ */
+ ret = ath5k_setup_bands(dev);
+ if (ret) {
+ DBG("ath5k: can't get channels\n");
+ goto err;
+ }
+
+ /* NB: setup here so ath5k_rate_update is happy */
+ if (ah->ah_modes & AR5K_MODE_BIT_11A)
+ ath5k_setcurmode(sc, AR5K_MODE_11A);
+ else
+ ath5k_setcurmode(sc, AR5K_MODE_11B);
+
+ /*
+ * Allocate tx+rx descriptors and populate the lists.
+ */
+ ret = ath5k_desc_alloc(sc);
+ if (ret) {
+ DBG("ath5k: can't allocate descriptors\n");
+ goto err;
+ }
+
+ /*
+ * Allocate hardware transmit queues. Note that hw functions
+ * handle reseting these queues at the needed time.
+ */
+ ret = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (ret) {
+ DBG("ath5k: can't setup xmit queue\n");
+ goto err_desc;
+ }
+
+ sc->last_calib_ticks = currticks();
+
+ ret = ath5k_eeprom_read_mac(ah, sc->hwinfo->hwaddr);
+ if (ret) {
+ DBG("ath5k: unable to read address from EEPROM: 0x%04x\n",
+ sc->pdev->device);
+ goto err_queues;
+ }
+
+ memset(sc->bssidmask, 0xff, ETH_ALEN);
+ ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
+
+ ret = net80211_register(sc->dev, &ath5k_ops, sc->hwinfo);
+ if (ret) {
+ DBG("ath5k: can't register ieee80211 hw\n");
+ goto err_queues;
+ }
+
+ return 0;
+err_queues:
+ ath5k_txq_release(sc);
+err_desc:
+ ath5k_desc_free(sc);
+err:
+ return ret;
+}
+
+static void
+ath5k_detach(struct net80211_device *dev)
+{
+ struct ath5k_softc *sc = dev->priv;
+
+ net80211_unregister(dev);
+ ath5k_desc_free(sc);
+ ath5k_txq_release(sc);
+}
+
+
+
+
+/********************\
+* Channel/mode setup *
+\********************/
+
+/*
+ * Convert IEEE channel number to MHz frequency.
+ */
+static inline short
+ath5k_ieee2mhz(short chan)
+{
+ if (chan < 14)
+ return 2407 + 5 * chan;
+ if (chan == 14)
+ return 2484;
+ if (chan < 27)
+ return 2212 + 20 * chan;
+ return 5000 + 5 * chan;
+}
+
+static unsigned int
+ath5k_copy_channels(struct ath5k_hw *ah,
+ struct net80211_channel *channels,
+ unsigned int mode, unsigned int max)
+{
+ unsigned int i, count, size, chfreq, freq, ch;
+
+ if (!(ah->ah_modes & (1 << mode)))
+ return 0;
+
+ switch (mode) {
+ case AR5K_MODE_11A:
+ case AR5K_MODE_11A_TURBO:
+ /* 1..220, but 2GHz frequencies are filtered by check_channel */
+ size = 220;
+ chfreq = CHANNEL_5GHZ;
+ break;
+ case AR5K_MODE_11B:
+ case AR5K_MODE_11G:
+ case AR5K_MODE_11G_TURBO:
+ size = 26;
+ chfreq = CHANNEL_2GHZ;
+ break;
+ default:
+ return 0;
+ }
+
+ for (i = 0, count = 0; i < size && max > 0; i++) {
+ ch = i + 1 ;
+ freq = ath5k_ieee2mhz(ch);
+
+ /* Check if channel is supported by the chipset */
+ if (!ath5k_channel_ok(ah, freq, chfreq))
+ continue;
+
+ /* Write channel info and increment counter */
+ channels[count].center_freq = freq;
+ channels[count].maxpower = 0; /* use regulatory */
+ channels[count].band = (chfreq == CHANNEL_2GHZ) ?
+ NET80211_BAND_2GHZ : NET80211_BAND_5GHZ;
+ switch (mode) {
+ case AR5K_MODE_11A:
+ case AR5K_MODE_11G:
+ channels[count].hw_value = chfreq | CHANNEL_OFDM;
+ break;
+ case AR5K_MODE_11A_TURBO:
+ case AR5K_MODE_11G_TURBO:
+ channels[count].hw_value = chfreq |
+ CHANNEL_OFDM | CHANNEL_TURBO;
+ break;
+ case AR5K_MODE_11B:
+ channels[count].hw_value = CHANNEL_B;
+ }
+
+ count++;
+ max--;
+ }
+
+ return count;
+}
+
+static int
+ath5k_setup_bands(struct net80211_device *dev)
+{
+ struct ath5k_softc *sc = dev->priv;
+ struct ath5k_hw *ah = sc->ah;
+ int max_c, count_c = 0;
+ int i;
+ int band;
+
+ max_c = sizeof(sc->hwinfo->channels) / sizeof(sc->hwinfo->channels[0]);
+
+ /* 2GHz band */
+ if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11G) {
+ /* G mode */
+ band = NET80211_BAND_2GHZ;
+ sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ;
+ sc->hwinfo->modes = (NET80211_MODE_G | NET80211_MODE_B);
+
+ for (i = 0; i < 12; i++)
+ sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate;
+ sc->hwinfo->nr_rates[band] = 12;
+
+ sc->hwinfo->nr_channels =
+ ath5k_copy_channels(ah, sc->hwinfo->channels,
+ AR5K_MODE_11G, max_c);
+ count_c = sc->hwinfo->nr_channels;
+ max_c -= count_c;
+ } else if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B) {
+ /* B mode */
+ band = NET80211_BAND_2GHZ;
+ sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ;
+ sc->hwinfo->modes = NET80211_MODE_B;
+
+ for (i = 0; i < 4; i++)
+ sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate;
+ sc->hwinfo->nr_rates[band] = 4;
+
+ sc->hwinfo->nr_channels =
+ ath5k_copy_channels(ah, sc->hwinfo->channels,
+ AR5K_MODE_11B, max_c);
+ count_c = sc->hwinfo->nr_channels;
+ max_c -= count_c;
+ }
+
+ /* 5GHz band, A mode */
+ if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A) {
+ band = NET80211_BAND_5GHZ;
+ sc->hwinfo->bands |= NET80211_BAND_BIT_5GHZ;
+ sc->hwinfo->modes |= NET80211_MODE_A;
+
+ for (i = 0; i < 8; i++)
+ sc->hwinfo->rates[band][i] = ath5k_rates[i+4].bitrate;
+ sc->hwinfo->nr_rates[band] = 8;
+
+ sc->hwinfo->nr_channels =
+ ath5k_copy_channels(ah, sc->hwinfo->channels,
+ AR5K_MODE_11B, max_c);
+ count_c = sc->hwinfo->nr_channels;
+ max_c -= count_c;
+ }
+
+ return 0;
+}
+
+/*
+ * Set/change channels. If the channel is really being changed,
+ * it's done by reseting the chip. To accomplish this we must
+ * first cleanup any pending DMA, then restart stuff after a la
+ * ath5k_init.
+ */
+static int
+ath5k_chan_set(struct ath5k_softc *sc, struct net80211_channel *chan)
+{
+ if (chan->center_freq != sc->curchan->center_freq ||
+ chan->hw_value != sc->curchan->hw_value) {
+ /*
+ * To switch channels clear any pending DMA operations;
+ * wait long enough for the RX fifo to drain, reset the
+ * hardware at the new frequency, and then re-enable
+ * the relevant bits of the h/w.
+ */
+ DBG2("ath5k: resetting for channel change (%d -> %d MHz)\n",
+ sc->curchan->center_freq, chan->center_freq);
+ return ath5k_reset(sc, chan);
+ }
+
+ return 0;
+}
+
+static void
+ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
+{
+ sc->curmode = mode;
+
+ if (mode == AR5K_MODE_11A) {
+ sc->curband = NET80211_BAND_5GHZ;
+ } else {
+ sc->curband = NET80211_BAND_2GHZ;
+ }
+}
+
+static void
+ath5k_mode_setup(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ u32 rfilt;
+
+ /* configure rx filter */
+ rfilt = sc->filter_flags;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+
+ if (ath5k_hw_hasbssidmask(ah))
+ ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
+
+ /* configure operational mode */
+ ath5k_hw_set_opmode(ah);
+
+ ath5k_hw_set_mcast_filter(ah, 0, 0);
+}
+
+static inline int
+ath5k_hw_rix_to_bitrate(int hw_rix)
+{
+ int i;
+
+ for (i = 0; i < ATH5K_NR_RATES; i++) {
+ if (ath5k_rates[i].hw_code == hw_rix)
+ return ath5k_rates[i].bitrate;
+ }
+
+ DBG("ath5k: invalid rix %02x\n", hw_rix);
+ return 10; /* use lowest rate */
+}
+
+int ath5k_bitrate_to_hw_rix(int bitrate)
+{
+ int i;
+
+ for (i = 0; i < ATH5K_NR_RATES; i++) {
+ if (ath5k_rates[i].bitrate == bitrate)
+ return ath5k_rates[i].hw_code;
+ }
+
+ DBG("ath5k: invalid bitrate %d\n", bitrate);
+ return ATH5K_RATE_CODE_1M; /* use lowest rate */
+}
+
+/***************\
+* Buffers setup *
+\***************/
+
+static struct io_buffer *
+ath5k_rx_iob_alloc(struct ath5k_softc *sc, u32 *iob_addr)
+{
+ struct io_buffer *iob;
+ unsigned int off;
+
+ /*
+ * Allocate buffer with headroom_needed space for the
+ * fake physical layer header at the start.
+ */
+ iob = alloc_iob(sc->rxbufsize + sc->cachelsz - 1);
+
+ if (!iob) {
+ DBG("ath5k: can't alloc iobuf of size %d\n",
+ sc->rxbufsize + sc->cachelsz - 1);
+ return NULL;
+ }
+
+ *iob_addr = virt_to_bus(iob->data);
+
+ /*
+ * Cache-line-align. This is important (for the
+ * 5210 at least) as not doing so causes bogus data
+ * in rx'd frames.
+ */
+ off = *iob_addr % sc->cachelsz;
+ if (off != 0) {
+ iob_reserve(iob, sc->cachelsz - off);
+ *iob_addr += sc->cachelsz - off;
+ }
+
+ return iob;
+}
+
+static int
+ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct io_buffer *iob = bf->iob;
+ struct ath5k_desc *ds;
+
+ if (!iob) {
+ iob = ath5k_rx_iob_alloc(sc, &bf->iobaddr);
+ if (!iob)
+ return -ENOMEM;
+ bf->iob = iob;
+ }
+
+ /*
+ * Setup descriptors. For receive we always terminate
+ * the descriptor list with a self-linked entry so we'll
+ * not get overrun under high load (as can happen with a
+ * 5212 when ANI processing enables PHY error frames).
+ *
+ * To insure the last descriptor is self-linked we create
+ * each descriptor as self-linked and add it to the end. As
+ * each additional descriptor is added the previous self-linked
+ * entry is ``fixed'' naturally. This should be safe even
+ * if DMA is happening. When processing RX interrupts we
+ * never remove/process the last, self-linked, entry on the
+ * descriptor list. This insures the hardware always has
+ * someplace to write a new frame.
+ */
+ ds = bf->desc;
+ ds->ds_link = bf->daddr; /* link to self */
+ ds->ds_data = bf->iobaddr;
+ if (ah->ah_setup_rx_desc(ah, ds,
+ iob_tailroom(iob), /* buffer size */
+ 0) != 0) {
+ DBG("ath5k: error setting up RX descriptor for %d bytes\n", iob_tailroom(iob));
+ return -EINVAL;
+ }
+
+ if (sc->rxlink != NULL)
+ *sc->rxlink = bf->daddr;
+ sc->rxlink = &ds->ds_link;
+ return 0;
+}
+
+static int
+ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_txq *txq = &sc->txq;
+ struct ath5k_desc *ds = bf->desc;
+ struct io_buffer *iob = bf->iob;
+ unsigned int pktlen, flags;
+ int ret;
+ u16 duration = 0;
+ u16 cts_rate = 0;
+
+ flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
+ bf->iobaddr = virt_to_bus(iob->data);
+ pktlen = iob_len(iob);
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ if (sc->dev->phy_flags & NET80211_PHY_USE_PROTECTION) {
+ struct net80211_device *dev = sc->dev;
+
+ flags |= AR5K_TXDESC_CTSENA;
+ cts_rate = sc->hw_rtscts_rate;
+ duration = net80211_cts_duration(dev, pktlen);
+ }
+ ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
+ IEEE80211_TYP_FRAME_HEADER_LEN,
+ AR5K_PKT_TYPE_NORMAL, sc->power_level * 2,
+ sc->hw_rate, ATH5K_RETRIES,
+ AR5K_TXKEYIX_INVALID, 0, flags,
+ cts_rate, duration);
+ if (ret)
+ return ret;
+
+ ds->ds_link = 0;
+ ds->ds_data = bf->iobaddr;
+
+ list_add_tail(&bf->list, &txq->q);
+ if (txq->link == NULL) /* is this first packet? */
+ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
+ else /* no, so only link it */
+ *txq->link = bf->daddr;
+
+ txq->link = &ds->ds_link;
+ ath5k_hw_start_tx_dma(ah, txq->qnum);
+ mb();
+
+ return 0;
+}
+
+/*******************\
+* Descriptors setup *
+\*******************/
+
+static int
+ath5k_desc_alloc(struct ath5k_softc *sc)
+{
+ struct ath5k_desc *ds;
+ struct ath5k_buf *bf;
+ u32 da;
+ unsigned int i;
+ int ret;
+
+ /* allocate descriptors */
+ sc->desc_len = sizeof(struct ath5k_desc) * (ATH_TXBUF + ATH_RXBUF + 1);
+ sc->desc = malloc_dma(sc->desc_len, ATH5K_DESC_ALIGN);
+ if (sc->desc == NULL) {
+ DBG("ath5k: can't allocate descriptors\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ memset(sc->desc, 0, sc->desc_len);
+ sc->desc_daddr = virt_to_bus(sc->desc);
+
+ ds = sc->desc;
+ da = sc->desc_daddr;
+
+ bf = calloc(ATH_TXBUF + ATH_RXBUF + 1, sizeof(struct ath5k_buf));
+ if (bf == NULL) {
+ DBG("ath5k: can't allocate buffer pointers\n");
+ ret = -ENOMEM;
+ goto err_free;
+ }
+ sc->bufptr = bf;
+
+ INIT_LIST_HEAD(&sc->rxbuf);
+ for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &sc->rxbuf);
+ }
+
+ INIT_LIST_HEAD(&sc->txbuf);
+ sc->txbuf_len = ATH_TXBUF;
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &sc->txbuf);
+ }
+
+ return 0;
+
+err_free:
+ free_dma(sc->desc, sc->desc_len);
+err:
+ sc->desc = NULL;
+ return ret;
+}
+
+static void
+ath5k_desc_free(struct ath5k_softc *sc)
+{
+ struct ath5k_buf *bf;
+
+ list_for_each_entry(bf, &sc->txbuf, list)
+ ath5k_txbuf_free(sc, bf);
+ list_for_each_entry(bf, &sc->rxbuf, list)
+ ath5k_rxbuf_free(sc, bf);
+
+ /* Free memory associated with all descriptors */
+ free_dma(sc->desc, sc->desc_len);
+
+ free(sc->bufptr);
+ sc->bufptr = NULL;
+}
+
+
+
+
+
+/**************\
+* Queues setup *
+\**************/
+
+static int
+ath5k_txq_setup(struct ath5k_softc *sc, int qtype, int subtype)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_txq *txq;
+ struct ath5k_txq_info qi = {
+ .tqi_subtype = subtype,
+ .tqi_aifs = AR5K_TXQ_USEDEFAULT,
+ .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
+ .tqi_cw_max = AR5K_TXQ_USEDEFAULT
+ };
+ int qnum;
+
+ /*
+ * Enable interrupts only for EOL and DESC conditions.
+ * We mark tx descriptors to receive a DESC interrupt
+ * when a tx queue gets deep; otherwise waiting for the
+ * EOL to reap descriptors. Note that this is done to
+ * reduce interrupt load and this only defers reaping
+ * descriptors, never transmitting frames. Aside from
+ * reducing interrupts this also permits more concurrency.
+ * The only potential downside is if the tx queue backs
+ * up in which case the top half of the kernel may backup
+ * due to a lack of tx descriptors.
+ */
+ qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
+ AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
+ qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
+ if (qnum < 0) {
+ DBG("ath5k: can't set up a TX queue\n");
+ return -EIO;
+ }
+
+ txq = &sc->txq;
+ if (!txq->setup) {
+ txq->qnum = qnum;
+ txq->link = NULL;
+ INIT_LIST_HEAD(&txq->q);
+ txq->setup = 1;
+ }
+ return 0;
+}
+
+static void
+ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+{
+ struct ath5k_buf *bf, *bf0;
+
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ath5k_txbuf_free(sc, bf);
+
+ list_del(&bf->list);
+ list_add_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ }
+ txq->link = NULL;
+}
+
+/*
+ * Drain the transmit queues and reclaim resources.
+ */
+static void
+ath5k_txq_cleanup(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+
+ if (!(sc->status & ATH_STAT_INVALID)) {
+ /* don't touch the hardware if marked invalid */
+ if (sc->txq.setup) {
+ ath5k_hw_stop_tx_dma(ah, sc->txq.qnum);
+ DBG("ath5k: txq [%d] %x, link %p\n",
+ sc->txq.qnum,
+ ath5k_hw_get_txdp(ah, sc->txq.qnum),
+ sc->txq.link);
+ }
+ }
+
+ if (sc->txq.setup)
+ ath5k_txq_drainq(sc, &sc->txq);
+}
+
+static void
+ath5k_txq_release(struct ath5k_softc *sc)
+{
+ if (sc->txq.setup) {
+ ath5k_hw_release_tx_queue(sc->ah);
+ sc->txq.setup = 0;
+ }
+}
+
+
+
+
+/*************\
+* RX Handling *
+\*************/
+
+/*
+ * Enable the receive h/w following a reset.
+ */
+static int
+ath5k_rx_start(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_buf *bf;
+ int ret;
+
+ sc->rxbufsize = IEEE80211_MAX_LEN;
+ if (sc->rxbufsize % sc->cachelsz != 0)
+ sc->rxbufsize += sc->cachelsz - (sc->rxbufsize % sc->cachelsz);
+
+ sc->rxlink = NULL;
+
+ list_for_each_entry(bf, &sc->rxbuf, list) {
+ ret = ath5k_rxbuf_setup(sc, bf);
+ if (ret != 0)
+ return ret;
+ }
+
+ bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list);
+
+ ath5k_hw_set_rxdp(ah, bf->daddr);
+ ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
+ ath5k_mode_setup(sc); /* set filters, etc. */
+ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
+
+ return 0;
+}
+
+/*
+ * Disable the receive h/w in preparation for a reset.
+ */
+static void
+ath5k_rx_stop(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
+ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
+ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
+
+ sc->rxlink = NULL; /* just in case */
+}
+
+static void
+ath5k_handle_rx(struct ath5k_softc *sc)
+{
+ struct ath5k_rx_status rs;
+ struct io_buffer *iob, *next_iob;
+ u32 next_iob_addr;
+ struct ath5k_buf *bf, *bf_last;
+ struct ath5k_desc *ds;
+ int ret;
+
+ memset(&rs, 0, sizeof(rs));
+
+ if (list_empty(&sc->rxbuf)) {
+ DBG("ath5k: empty rx buf pool\n");
+ return;
+ }
+
+ bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
+
+ do {
+ bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list);
+ assert(bf->iob != NULL);
+ iob = bf->iob;
+ ds = bf->desc;
+
+ /*
+ * last buffer must not be freed to ensure proper hardware
+ * function. When the hardware finishes also a packet next to
+ * it, we are sure, it doesn't use it anymore and we can go on.
+ */
+ if (bf_last == bf)
+ bf->flags |= 1;
+ if (bf->flags) {
+ struct ath5k_buf *bf_next = list_entry(bf->list.next,
+ struct ath5k_buf, list);
+ ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+ &rs);
+ if (ret)
+ break;
+ bf->flags &= ~1;
+ /* skip the overwritten one (even status is martian) */
+ goto next;
+ }
+
+ ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
+ if (ret) {
+ if (ret != -EINPROGRESS) {
+ DBG("ath5k: error in processing rx desc: %s\n",
+ strerror(ret));
+ net80211_rx_err(sc->dev, NULL, -ret);
+ } else {
+ /* normal return, reached end of
+ available descriptors */
+ }
+ return;
+ }
+
+ if (rs.rs_more) {
+ DBG("ath5k: unsupported fragmented rx\n");
+ goto next;
+ }
+
+ if (rs.rs_status) {
+ if (rs.rs_status & AR5K_RXERR_PHY) {
+ /* These are uncommon, and may indicate a real problem. */
+ net80211_rx_err(sc->dev, NULL, EIO);
+ goto next;
+ }
+ if (rs.rs_status & AR5K_RXERR_CRC) {
+ /* These occur *all the time*. */
+ goto next;
+ }
+ if (rs.rs_status & AR5K_RXERR_DECRYPT) {
+ /*
+ * Decrypt error. If the error occurred
+ * because there was no hardware key, then
+ * let the frame through so the upper layers
+ * can process it. This is necessary for 5210
+ * parts which have no way to setup a ``clear''
+ * key cache entry.
+ *
+ * XXX do key cache faulting
+ */
+ if (rs.rs_keyix == AR5K_RXKEYIX_INVALID &&
+ !(rs.rs_status & AR5K_RXERR_CRC))
+ goto accept;
+ }
+
+ /* any other error, unhandled */
+ DBG("ath5k: packet rx status %x\n", rs.rs_status);
+ goto next;
+ }
+accept:
+ next_iob = ath5k_rx_iob_alloc(sc, &next_iob_addr);
+
+ /*
+ * If we can't replace bf->iob with a new iob under memory
+ * pressure, just skip this packet
+ */
+ if (!next_iob) {
+ DBG("ath5k: dropping packet under memory pressure\n");
+ goto next;
+ }
+
+ iob_put(iob, rs.rs_datalen);
+
+ /* The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. However, gPXE only
+ * supports standard 802.11 packets with 24-byte
+ * header, so no padding correction should be needed.
+ */
+
+ DBG2("ath5k: rx %d bytes, signal %d\n", rs.rs_datalen,
+ rs.rs_rssi);
+
+ net80211_rx(sc->dev, iob, rs.rs_rssi,
+ ath5k_hw_rix_to_bitrate(rs.rs_rate));
+
+ bf->iob = next_iob;
+ bf->iobaddr = next_iob_addr;
+next:
+ list_del(&bf->list);
+ list_add_tail(&bf->list, &sc->rxbuf);
+ } while (ath5k_rxbuf_setup(sc, bf) == 0);
+}
+
+
+
+
+/*************\
+* TX Handling *
+\*************/
+
+static void
+ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+{
+ struct ath5k_tx_status ts;
+ struct ath5k_buf *bf, *bf0;
+ struct ath5k_desc *ds;
+ struct io_buffer *iob;
+ int ret;
+
+ memset(&ts, 0, sizeof(ts));
+
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ds = bf->desc;
+
+ ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
+ if (ret) {
+ if (ret != -EINPROGRESS) {
+ DBG("ath5k: error in processing tx desc: %s\n",
+ strerror(ret));
+ } else {
+ /* normal return, reached end of tx completions */
+ }
+ break;
+ }
+
+ iob = bf->iob;
+ bf->iob = NULL;
+
+ DBG2("ath5k: tx %d bytes complete, %d retries\n",
+ iob_len(iob), ts.ts_retry[0]);
+
+ net80211_tx_complete(sc->dev, iob, ts.ts_retry[0],
+ ts.ts_status ? EIO : 0);
+
+ list_del(&bf->list);
+ list_add_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ }
+
+ if (list_empty(&txq->q))
+ txq->link = NULL;
+}
+
+static void
+ath5k_handle_tx(struct ath5k_softc *sc)
+{
+ ath5k_tx_processq(sc, &sc->txq);
+}
+
+
+/********************\
+* Interrupt handling *
+\********************/
+
+static void
+ath5k_irq(struct net80211_device *dev, int enable)
+{
+ struct ath5k_softc *sc = dev->priv;
+ struct ath5k_hw *ah = sc->ah;
+
+ sc->irq_ena = enable;
+ ah->ah_ier = enable ? AR5K_IER_ENABLE : AR5K_IER_DISABLE;
+
+ ath5k_hw_reg_write(ah, ah->ah_ier, AR5K_IER);
+ ath5k_hw_set_imr(ah, sc->imask);
+}
+
+static int
+ath5k_init(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ int ret, i;
+
+ /*
+ * Stop anything previously setup. This is safe
+ * no matter this is the first time through or not.
+ */
+ ath5k_stop_hw(sc);
+
+ /*
+ * The basic interface to setting the hardware in a good
+ * state is ``reset''. On return the hardware is known to
+ * be powered up and with interrupts disabled. This must
+ * be followed by initialization of the appropriate bits
+ * and then setup of the interrupt mask.
+ */
+ sc->curchan = sc->dev->channels + sc->dev->channel;
+ sc->curband = sc->curchan->band;
+ sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
+ AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
+ AR5K_INT_FATAL | AR5K_INT_GLOBAL;
+ ret = ath5k_reset(sc, NULL);
+ if (ret)
+ goto done;
+
+ ath5k_rfkill_hw_start(ah);
+
+ /*
+ * Reset the key cache since some parts do not reset the
+ * contents on initial power up or resume from suspend.
+ */
+ for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
+ ath5k_hw_reset_key(ah, i);
+
+ /* Set ack to be sent at low bit-rates */
+ ath5k_hw_set_ack_bitrate_high(ah, 0);
+
+ ret = 0;
+done:
+ mb();
+ return ret;
+}
+
+static int
+ath5k_stop_hw(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+
+ /*
+ * Shutdown the hardware and driver:
+ * stop output from above
+ * disable interrupts
+ * turn off timers
+ * turn off the radio
+ * clear transmit machinery
+ * clear receive machinery
+ * drain and release tx queues
+ * reclaim beacon resources
+ * power down hardware
+ *
+ * Note that some of this work is not possible if the
+ * hardware is gone (invalid).
+ */
+
+ if (!(sc->status & ATH_STAT_INVALID)) {
+ ath5k_hw_set_imr(ah, 0);
+ }
+ ath5k_txq_cleanup(sc);
+ if (!(sc->status & ATH_STAT_INVALID)) {
+ ath5k_rx_stop(sc);
+ ath5k_hw_phy_disable(ah);
+ } else
+ sc->rxlink = NULL;
+
+ ath5k_rfkill_hw_stop(sc->ah);
+
+ return 0;
+}
+
+static void
+ath5k_poll(struct net80211_device *dev)
+{
+ struct ath5k_softc *sc = dev->priv;
+ struct ath5k_hw *ah = sc->ah;
+ enum ath5k_int status;
+ unsigned int counter = 1000;
+
+ if (currticks() - sc->last_calib_ticks >
+ ATH5K_CALIB_INTERVAL * ticks_per_sec()) {
+ ath5k_calibrate(sc);
+ sc->last_calib_ticks = currticks();
+ }
+
+ if ((sc->status & ATH_STAT_INVALID) ||
+ (sc->irq_ena && !ath5k_hw_is_intr_pending(ah)))
+ return;
+
+ do {
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+ DBGP("ath5k: status %#x/%#x\n", status, sc->imask);
+ if (status & AR5K_INT_FATAL) {
+ /*
+ * Fatal errors are unrecoverable.
+ * Typically these are caused by DMA errors.
+ */
+ DBG("ath5k: fatal error, resetting\n");
+ ath5k_reset_wake(sc);
+ } else if (status & AR5K_INT_RXORN) {
+ DBG("ath5k: rx overrun, resetting\n");
+ ath5k_reset_wake(sc);
+ } else {
+ if (status & AR5K_INT_RXEOL) {
+ /*
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work at
+ * least on older hardware revs.
+ */
+ DBG("ath5k: rx EOL\n");
+ sc->rxlink = NULL;
+ }
+ if (status & AR5K_INT_TXURN) {
+ /* bump tx trigger level */
+ DBG("ath5k: tx underrun\n");
+ ath5k_hw_update_tx_triglevel(ah, 1);
+ }
+ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
+ ath5k_handle_rx(sc);
+ if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR | AR5K_INT_TXEOL))
+ ath5k_handle_tx(sc);
+ }
+ } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
+
+ if (!counter)
+ DBG("ath5k: too many interrupts, giving up for now\n");
+}
+
+/*
+ * Periodically recalibrate the PHY to account
+ * for temperature/environment changes.
+ */
+static void
+ath5k_calibrate(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+
+ if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
+ /*
+ * Rfgain is out of bounds, reset the chip
+ * to load new gain values.
+ */
+ DBG("ath5k: resetting for calibration\n");
+ ath5k_reset_wake(sc);
+ }
+ if (ath5k_hw_phy_calibrate(ah, sc->curchan))
+ DBG("ath5k: calibration of channel %d failed\n",
+ sc->curchan->channel_nr);
+}
+
+
+/********************\
+* Net80211 functions *
+\********************/
+
+static int
+ath5k_tx(struct net80211_device *dev, struct io_buffer *iob)
+{
+ struct ath5k_softc *sc = dev->priv;
+ struct ath5k_buf *bf;
+ int rc;
+
+ /*
+ * The hardware expects the header padded to 4 byte boundaries.
+ * gPXE only ever sends 24-byte headers, so no action necessary.
+ */
+
+ if (list_empty(&sc->txbuf)) {
+ DBG("ath5k: dropping packet because no tx bufs available\n");
+ return -ENOBUFS;
+ }
+
+ bf = list_entry(sc->txbuf.next, struct ath5k_buf, list);
+ list_del(&bf->list);
+ sc->txbuf_len--;
+
+ bf->iob = iob;
+
+ if ((rc = ath5k_txbuf_setup(sc, bf)) != 0) {
+ bf->iob = NULL;
+ list_add_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ return rc;
+ }
+ return 0;
+}
+
+/*
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ */
+static int
+ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan)
+{
+ struct ath5k_hw *ah = sc->ah;
+ int ret;
+
+ if (chan) {
+ ath5k_hw_set_imr(ah, 0);
+ ath5k_txq_cleanup(sc);
+ ath5k_rx_stop(sc);
+
+ sc->curchan = chan;
+ sc->curband = chan->band;
+ }
+
+ ret = ath5k_hw_reset(ah, sc->curchan, 1);
+ if (ret) {
+ DBG("ath5k: can't reset hardware: %s\n", strerror(ret));
+ return ret;
+ }
+
+ ret = ath5k_rx_start(sc);
+ if (ret) {
+ DBG("ath5k: can't start rx logic: %s\n", strerror(ret));
+ return ret;
+ }
+
+ /*
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
+ *
+ * XXX needed?
+ */
+/* ath5k_chan_change(sc, c); */
+
+ /* Reenable interrupts if necessary */
+ ath5k_irq(sc->dev, sc->irq_ena);
+
+ return 0;
+}
+
+static int ath5k_reset_wake(struct ath5k_softc *sc)
+{
+ return ath5k_reset(sc, sc->curchan);
+}
+
+static int ath5k_start(struct net80211_device *dev)
+{
+ struct ath5k_softc *sc = dev->priv;
+ int ret;
+
+ if ((ret = ath5k_init(sc)) != 0)
+ return ret;
+
+ sc->assoc = 0;
+ ath5k_configure_filter(sc);
+ ath5k_hw_set_lladdr(sc->ah, dev->netdev->ll_addr);
+
+ return 0;
+}
+
+static void ath5k_stop(struct net80211_device *dev)
+{
+ struct ath5k_softc *sc = dev->priv;
+ u8 mac[ETH_ALEN] = {};
+
+ ath5k_hw_set_lladdr(sc->ah, mac);
+
+ ath5k_stop_hw(sc);
+}
+
+static int
+ath5k_config(struct net80211_device *dev, int changed)
+{
+ struct ath5k_softc *sc = dev->priv;
+ struct ath5k_hw *ah = sc->ah;
+ struct net80211_channel *chan = &dev->channels[dev->channel];
+ int ret;
+
+ if (changed & NET80211_CFG_CHANNEL) {
+ sc->power_level = chan->maxpower;
+ if ((ret = ath5k_chan_set(sc, chan)) != 0)
+ return ret;
+ }
+
+ if ((changed & NET80211_CFG_RATE) ||
+ (changed & NET80211_CFG_PHY_PARAMS)) {
+ int spmbl = ATH5K_SPMBL_NO;
+ u16 rate = dev->rates[dev->rate];
+ u16 slowrate = dev->rates[dev->rtscts_rate];
+ int i;
+
+ if (dev->phy_flags & NET80211_PHY_USE_SHORT_PREAMBLE)
+ spmbl = ATH5K_SPMBL_YES;
+
+ for (i = 0; i < ATH5K_NR_RATES; i++) {
+ if (ath5k_rates[i].bitrate == rate &&
+ (ath5k_rates[i].short_pmbl & spmbl))
+ sc->hw_rate = ath5k_rates[i].hw_code;
+
+ if (ath5k_rates[i].bitrate == slowrate &&
+ (ath5k_rates[i].short_pmbl & spmbl))
+ sc->hw_rtscts_rate = ath5k_rates[i].hw_code;
+ }
+ }
+
+ if (changed & NET80211_CFG_ASSOC) {
+ sc->assoc = !!(dev->state & NET80211_ASSOCIATED);
+ if (sc->assoc) {
+ memcpy(ah->ah_bssid, dev->bssid, ETH_ALEN);
+ } else {
+ memset(ah->ah_bssid, 0xff, ETH_ALEN);
+ }
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * o always accept unicast, broadcast, and multicast traffic
+ * o multicast traffic for all BSSIDs will be enabled if mac80211
+ * says it should be
+ * o maintain current state of phy ofdm or phy cck error reception.
+ * If the hardware detects any of these type of errors then
+ * ath5k_hw_get_rx_filter() will pass to us the respective
+ * hardware filters to be able to receive these type of frames.
+ * o probe request frames are accepted only when operating in
+ * hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ * - when operating in adhoc mode so the 802.11 layer creates
+ * node table entries for peers,
+ * - when operating in station mode for collecting rssi data when
+ * the station is otherwise quiet, or
+ * - when scanning
+ */
+static void ath5k_configure_filter(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ u32 mfilt[2], rfilt;
+
+ /* Enable all multicast */
+ mfilt[0] = ~0;
+ mfilt[1] = ~0;
+
+ /* Enable data frames and beacons */
+ rfilt = (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
+ AR5K_RX_FILTER_MCAST | AR5K_RX_FILTER_BEACON);
+
+ /* Set filters */
+ ath5k_hw_set_rx_filter(ah, rfilt);
+
+ /* Set multicast bits */
+ ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
+
+ /* Set the cached hw filter flags, this will alter actually
+ * be set in HW */
+ sc->filter_flags = rfilt;
+}