aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for-linus' of ↵Linus Torvalds2010-11-291-0/+24
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tpm: Autodetect itpm devices
| * tpm: Autodetect itpm devicesMatthew Garrett2010-11-301-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Lenovos have TPMs that require a quirk to function correctly. This can be autodetected by checking whether the device has a _HID of INTC0102. This is an invalid PNPid, and as such is discarded by the pnp layer - however it's still present in the ACPI code, so we can pull it out that way. This means that the quirk won't be automatically applied on non-ACPI systems, but without ACPI we don't have any way to identify the chip anyway so I don't think that's a great concern. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: James Morris <jmorris@namei.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-11-2917-120/+180
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) af_unix: limit recursion level pch_gbe driver: The wrong of initializer entry pch_gbe dreiver: chang author ucc_geth: fix ucc halt problem in half duplex mode inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners ehea: Add some info messages and fix an issue hso: fix disable_net NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty cxgb4vf: fix setting unicast/multicast addresses ... net, ppp: Report correct error code if unit allocation failed DECnet: don't leak uninitialized stack byte au1000_eth: fix invalid address accessing the MAC enable register dccp: fix error in updating the GAR tcp: restrict net.ipv4.tcp_adv_win_scale (#20312) netns: Don't leak others' openreq-s in proc Net: ceph: Makefile: Remove unnessary code vhost/net: fix rcu check usage econet: fix CVE-2010-3848 econet: fix CVE-2010-3850 econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849 ...
| * | pch_gbe driver: The wrong of initializer entryToshiharu Okada2010-11-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | The wrong of initializer entry was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_gbe dreiver: chang authorToshiharu Okada2010-11-292-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T". Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ucc_geth: fix ucc halt problem in half duplex modeYang Li2010-11-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size), the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation of the QE Reference Manual. But that will sometimes cause tx halt while working in half duplex mode. According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO threshold size can cause UCC to halt), setting UTFTT less than [(UTFS x (M - 8)/M) - 128] will prevent this from happening (M is the minimum buffer size). The patch changes UTFTT back to 256. Signed-off-by: Li Yang <leoli@freescale.com> Cc: Jean-Denis Boyer <jdboyer@media5corp.com> Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ehea: Add some info messages and fix an issueBreno Leitao2010-11-281-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds some debug information about ehea not being able to allocate enough spaces. Also it correctly updates the amount of available skb. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | hso: fix disable_netFilip Aben2010-11-281-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HSO driver incorrectly creates a serial device instead of a net device when disable_net is set. It shouldn't create anything for the network interface. Signed-off-by: Filip Aben <f.aben@option.com> Reported-by: Piotr Isajew <pki@ex.com.pl> Reported-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | NET: wan/x25_asy, move lapb_unregister to x25_asy_close_ttyJiri Slaby2010-11-281-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We register lapb when tty is created, but unregister it only when the device is UP. So move the lapb_unregister to x25_asy_close_tty after the device is down. The old behaviour causes ldisc switching to fail each second attempt, because we noted for us that the device is unused, so we use it the second time, but labp layer still have it registered, so it fails obviously. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Sergey Lapin <slapin@ossfans.org> Cc: Andrew Hendry <andrew.hendry@gmail.com> Tested-by: Sergey Lapin <slapin@ossfans.org> Tested-by: Mikhail Ulyanov <ulyanov.mikhail@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cxgb4vf: fix setting unicast/multicast addresses ...Casey Leedom2010-11-282-63/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | We were truncating the number of unicast and multicast MAC addresses supported. Additionally, we were incorrectly computing the MAC Address hash (a "1 << N" where we needed a "1ULL << N"). Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net, ppp: Report correct error code if unit allocation failedCyrill Gorcunov2010-11-281-21/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocating unit from ird might return several error codes not only -EAGAIN, so it should not be changed and returned precisely. Same time unit release procedure should be invoked only if device is unregistering. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | au1000_eth: fix invalid address accessing the MAC enable registerWolfgang Grandegger2010-11-281-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "aup->enable" holds already the address pointing to the MAC enable register. The bug was introduced by commit d0e7cb: "au1000-eth: remove volatiles, switch to I/O accessors". CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | vhost/net: fix rcu check usageMichael S. Tsirkin2010-11-251-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Incorrect rcu check was used as rcu isn't done under mutex here. Force check to 1 for now, to stop it from complaining. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * | isdn: icn: Fix stack corruption bug.Steven Rostedt2010-11-241-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Running randconfig with ktest.pl I hit this bug: [ 16.101158] ICN-ISDN-driver Rev 1.65.6.8 mem=0x000d0000 [ 16.106376] icn: (line0) ICN-2B, port 0x320 added [ 16.111064] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c1642880 [ 16.111066] [ 16.121214] Pid: 1, comm: swapper Not tainted 2.6.37-rc2-test-00124-g6656b3f #8 [ 16.128499] Call Trace: [ 16.130942] [<c0f51662>] ? printk+0x1d/0x23 [ 16.135200] [<c0f5153f>] panic+0x5c/0x162 [ 16.139286] [<c0d62a9a>] ? icn_addcard+0x6d/0xbe [ 16.143975] [<c0445783>] print_tainted+0x0/0x8c [ 16.148582] [<c1642880>] ? icn_init+0xd8/0xdf [ 16.153012] [<c1642880>] icn_init+0xd8/0xdf [ 16.157271] [<c04012e5>] do_one_initcall+0x8c/0x143 [ 16.162222] [<c16427a8>] ? icn_init+0x0/0xdf [ 16.166566] [<c15f1a05>] kernel_init+0x13f/0x1da [ 16.171256] [<c15f18c6>] ? kernel_init+0x0/0x1da [ 16.175945] [<c0403bfe>] kernel_thread_helper+0x6/0x10 [ 16.181181] panic occurred, switching back to text console Looking into it I found that the stack was corrupted by the assignment of the Rev #. The variable rev is given 10 bytes, and in this output the characters that were copied was: " 1.65.6.8 $". Which was 11 characters plus the null ending character for a total of 12 bytes, thus corrupting the stack. This patch ups the variable size to 20 bytes as well as changes the strcpy to strncpy. I also added a check to make sure '$' is found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵David S. Miller2010-11-244-2/+4
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | wireless: b43: fix error path in SDIOGuennadi Liakhovetski2010-11-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | carl9170: fix virtual interface setup crashChristian Lamparter2010-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a faulty bound check which caused a crash when too many virtual interface were brought up. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: carl9170 [...] Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+ EIP: 0060:[<f8125f67>] EFLAGS: 00210206 CPU: 0 EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] EAX: 00000000 ... Process wpa_supplicant Stack: f4f88f34 fffffff4 .. Call Trace: [<f8f4e666>] ? ieee80211_do_open+0x406/0x5c0 [mac80211] [...] Code: <89> 42 04 ... EIP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] CR2: 0000000000000004 Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | ssb: b43-pci-bridge: Add new vendor for BCM4318Daniel Klaffenbach2010-11-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | ath9k: fix timeout on stopping rx dmaFelix Fietkau2010-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough. When it's time to stop DMA, the PCU is still busy, so the rx enable bit never clears. Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster, with this change, I cannot reproduce the rx stop related WARN_ON anymore. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2010-11-292-5/+5
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Fix typos in Documentation/edac.txt EDAC, MCE: Fix edac_init_mce_inject error handling EDAC: Remove deprecated kbuild goal definitions
| * | | EDAC, MCE: Fix edac_init_mce_inject error handlingAxel Lin2010-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise, variable i will be -1 inside the latest iteration of the while loop. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
| * | | EDAC: Remove deprecated kbuild goal definitionsTracey Dent2010-11-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change EDAC's Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. [bp: Fixup commit message] [bp: Fixup indentation] Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* | | | Merge branch 'fwnet' of ↵Linus Torvalds2010-11-281-70/+90
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: net: throttle TX queue before running out of tlabels firewire: net: replace lists by counters firewire: net: fix memory leaks firewire: net: count stats.tx_packets and stats.tx_bytes
| * | | | firewire: net: throttle TX queue before running out of tlabelsStefan Richter2010-11-171-24/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prevents firewire-net from submitting write requests in fast succession until failure due to all 64 transaction labels were used up for unfinished split transactions. The netif_stop/wake_queue API is used for this purpose. Without this stop/wake mechanism, datagrams were simply lost whenever the tlabel pool was exhausted. Plus, tlabel exhaustion by firewire-net also prevented other unrelated outbound transactions to be initiated. The chosen queue depth was checked by me to hit the maximum possible throughput with an OS X peer whose receive DMA is good enough to never reject requests due to busy inbound request FIFO. Current Linux peers show a mixed picture of -5%...+15% change in bandwidth; their current bottleneck are RCODE_BUSY situations (fewer or more, depending on TX queue depth) due to too small AR buffer in firewire-ohci. Maxim Levitsky tested this change with similar watermarks with a Linux peer and some pending firewire-ohci improvements that address the RCODE_BUSY problem and confirmed that these TX queue limits are good. Note: This removes some netif_wake_queue from reception code paths. They were apparently copy&paste artefacts from a nonsensical netif_wake_queue use in the older eth1394 driver. This belongs only into the transmit path. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
| * | | | firewire: net: replace lists by countersStefan Richter2010-11-171-47/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current transmit code does not at all make use of - fwnet_device.packet_list and only very limited use of - fwnet_device.broadcasted_list, - fwnet_device.queued_packets. Their current function is to track whether the TX soft-IRQ finished dealing with an skb when the AT-req tasklet takes over, and to discard pending tx datagrams (if there are any) when the local node is removed. The latter does actually contain a race condition bug with TX soft-IRQ and AT-req tasklet. Instead of these lists and the corresponding link in fwnet_packet_task, - a flag in fwnet_packet_task to track whether fwnet_tx is done, - a counter of queued datagrams in fwnet_device do the job as well. The above mentioned theoretic race condition is resolved by letting fwnet_remove sleep until all datagrams were flushed. It may sleep almost arbitrarily long since fwnet_remove is executed in the context of a multithreaded (concurrency managed) workqueue. The type of max_payload is changed to u16 here to avoid waste in struct fwnet_packet_task. This value cannot exceed 4096 per IEEE 1394:2008 table 16-18 (or 32678 per specification of packet headers, if there is ever going to be something else than beta mode). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: net: fix memory leaksStefan Richter2010-11-171-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a) fwnet_transmit_packet_done used to poison ptask->pt_link by list_del. If fwnet_send_packet checked later whether it was responsible to clean up (in the border case that the TX soft IRQ was outpaced by the AT-req tasklet on another CPU), it missed this because ptask->pt_link was no longer shown as empty. b) If fwnet_write_complete got an rcode other than RCODE_COMPLETE, we missed to free the skb and ptask entirely. Also, count stats.tx_dropped and stats.tx_errors when rcode != 0. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: net: count stats.tx_packets and stats.tx_bytesStefan Richter2010-11-171-3/+6
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | | | Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds2010-11-271-7/+9
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: release locks in check_corruption
| * | | | | UBI: release locks in check_corruptionDan Carpenter2010-11-191-7/+9
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 45aafd32996e27 "UBI: tighten the corrupted PEB criteria" introduced some return paths that didn't release the ubi->buf_mutex Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* | | | | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-11-271-1/+1
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] qdio: free indicator after reset is finished [S390] nmi: fix clock comparator revalidation
| * | | | | [S390] qdio: free indicator after reset is finishedJan Glauber2010-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qdio device indicator is freed before the device is notified that the indicator is reset. This sequence contains a race when the freed indicator is used by a new device while the reset of the indicator is still pending. Do the reset operation before freeing the indicator to avoid that potential race. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | | | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-11-274-26/+36
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix build for PROC_FS disabled block: fix amiga and atari floppy driver compile warning blk-throttle: Fix calculation of max number of WRITES to be dispatched ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER xen/blkfront: change blk_shadow.request to proper pointer xen/blkfront: map REQ_FLUSH into a full barrier
| * | | | | | cciss: fix build for PROC_FS disabledJens Axboe2010-11-171-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent patch to fix the removal of a non-existing proc directory introduced this build problem for !CONFIG_PROC_FS: drivers/block/cciss.c:4929: error: 'proc_cciss' undeclared (first use in this function) Fix it by moving proc_cciss outside of the CONFIG_PROC_FS scope. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | | block: fix amiga and atari floppy driver compile warningVivek Goyal2010-11-152-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Geert, my crosstool don't produce warning below. I guess this has to do something with compiler version. - Geert noticed following warning during compilation. drivers/block/amiflop.c:1344: warning: ‘rq’ may be used uninitialized in this function drivers/block/ataflop.c:1402: warning: ‘rq’ may be used uninitialized in this function - Initialize rq to NULL to fix the warning. If we can't find a suitable request to dispatch, this function should return NULL instead of a possibly garbage pointer. - Cross compile tested only. Don't have hardware to test it. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | | Merge branch 'upstream/blkfront' of ↵Jens Axboe2010-11-121-22/+33
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into for-linus Conflicts: drivers/block/xen-blkfront.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| | * | | | | | xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requestsJeremy Fitzhardinge2010-11-021-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some(?) Xen block backends fail BLKIF_OP_WRITE_BARRIER requests, which Linux uses as a cache flush operation. In that case, disable use of FLUSH. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Daniel Stodden <daniel.stodden@citrix.com>
| | * | | | | | xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIERJeremy Fitzhardinge2010-11-021-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BLKIF_OP_WRITE_BARRIER is a full ordered barrier, so we can use it to implement FUA as well as a plain FLUSH. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Christoph Hellwig <hch@lst.de>
| | * | | | | | xen/blkfront: change blk_shadow.request to proper pointerJeremy Fitzhardinge2010-11-021-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
| | * | | | | | xen/blkfront: map REQ_FLUSH into a full barrierJeremy Fitzhardinge2010-11-021-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a flush as a full barrier, since we have nothing weaker. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Christoph Hellwig <hch@lst.de>
* | | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2010-11-2711-62/+174
|\ \ \ \ \ \ \ \ | |_|_|/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdhci: 8-bit bus width changes mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD mmc: sdio: fix nasty oops in mmc_sdio_detect mmc: omap4: hsmmc: Fix improper card detection while booting mmc: fix rmmod race for hosts using card-detection polling mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35 mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci mmc: sdhci: Properly enable SDIO IRQ wakeups mmc: ushc: Return proper error code for ushc_probe() mmc: Fix printing of card DDR type
| * | | | | | | mmc: sdhci: 8-bit bus width changesPhilip Rakity2010-11-223-12/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now: * check for a v3 controller before setting 8-bit bus width * offer a callback for platform code to switch to 8-bit mode, which allows non-v3 controllers to support it * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify that the board designers have indeed brought out all the pins for 8-bit to the slot. We were previously relying only on whether the *controller* supported 8-bit, which doesn't tell us anything about the pin configuration in the board design. This fixes the MMC card regression reported by Maxim Levitsky here: http://thread.gmane.org/gmane.linux.kernel.mmc/4336 by no longer assuming that 8-bit works by default. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARDOhad Ben-Cohen2010-11-192-25/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some board/card/host configurations are not capable of powering off the card after boot. To support such configurations, and to allow smoother transition to runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to explicitly indicate whether it's OK to power off their cards after boot. SDIO core will enable runtime PM for a card only if that cap is set. As a result, the card will be powered down after boot, and will only be powered up again when a driver is loaded (and then it's up to the driver to decide whether power will be kept or not). This will prevent sdio_bus_probe() failures with setups that do not support powering off the card. Reported-and-tested-by: Daniel Drake <dsd@laptop.org> Reported-and-tested-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: sdio: fix nasty oops in mmc_sdio_detectOhad Ben-Cohen2010-11-191-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Power off the card in mmc_sdio_detect __before__ a potential error handler, which completely removes the card, executes, and only if the card was successfully powered on beforehand. While we're at it, use the _sync variant of the runtime PM put API, in order to ensure that the card is left powered off in case an error occurred, and the card is going to be removed. Reproduced and tested on the OLPC XO-1.5. Reported-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: omap4: hsmmc: Fix improper card detection while bootingkishore kadiyala2010-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While booting OMAP4 ES2.0 boards, cards on MMC1 and MMC2 controllers are not getting detected sometimes. During reset of command/data line, wrong pointer to base address was passed while read operation to SYSCTL register, thus impacting the updated reset logic. Passing the correct base address fixes the issue. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: fix rmmod race for hosts using card-detection pollingGuennadi Liakhovetski2010-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMC hosts that poll for card detection by defining the MMC_CAP_NEEDS_POLL flag have a race on rmmod, where the delayed work is cancelled without waiting for completed polling. To prevent this a _sync version of the work cancellation has to be used. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platformsJacob Pan2010-11-091-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown specific quirk, the default pci_probe will be called and crash the kernel. This patch unblocks the crash problem on C0 by using the same probing function as HC1, which limits the number of slots to one. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35Eric Bénard2010-11-071-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only these CPUs list the bug in their errata. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhciEric Bénard2010-11-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes timeout problems on i.MX's sdhci as suggested by Richard Zhu. Tested on: - i.MX257: not needed - i.MX357: needed - i.MX515: needed More details can be found here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-October/029748.html Signed-off-by: Eric Bénard <eric@eukrea.com> Tested-by: Shawn Guo <shawn.gsc@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: sdhci: Properly enable SDIO IRQ wakeupsDaniel Drake2010-11-073-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A little more work was needed for SDIO IRQ wakeups to be functional. Wake-on-WLAN on the SD WiFi adapter in the XO-1.5 laptop is now working. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | | | | mmc: ushc: Return proper error code for ushc_probe()Axel Lin2010-11-071-8/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improves error handling in the ushc driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Chris Ball <cjb@laptop.org>