aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-07-302-2/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: cyber2000fb: fix console in truecolor modes cyber2000fb: fix machine hang on module load SA1111: Eliminate use after free ARM: Fix Versatile/Realview/VExpress MMC card detection sense ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt ARM: Add barriers to io{read,write}{8,16,32} accessors as well ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE ARM: 6272/1: Convert L2x0 to use the IO relaxed operations ARM: 6271/1: Introduce *_relaxed() I/O accessors ARM: 6275/1: ux500: don't use writeb() in uncompress.h ARM: 6270/1: clean files in arch/arm/boot/compressed/ ARM: Fix csum_partial_copy_from_user()
| * cyber2000fb: fix console in truecolor modesOndrej Zary2010-07-301-0/+1
| | | | | | | | | | | | | | | | | | Return value was not set to 0 in setcolreg() with truecolor modes. This causes fb_set_cmap() to abort after first color, resulting in blank palette - and blank console in 24bpp and 32bpp modes. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * cyber2000fb: fix machine hang on module loadOndrej Zary2010-07-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | I was testing two CyberPro 2000 based PCI cards on x86 and the machine always hanged completely when the cyber2000fb module was loaded. It seems that the card hangs when some registers are accessed too quickly after writing RAMDAC control register. With this patch, both card work. Add delay after RAMDAC control register write to prevent hangs on module load. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: Fix Versatile/Realview/VExpress MMC card detection senseRussell King2010-07-301-2/+6
| | | | | | | | | | | | | | | | | | The MMC card detection sense has become really confused with negations at various levels, leading to some platforms not detecting inserted cards. Fix this by converting everything to positive logic throughout, thereby getting rid of these negations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'drm-fixes' of ↵Linus Torvalds2010-07-302-2/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/edid: Fix the HDTV hack sync adjustment drm/radeon/kms: fix radeon mid power profile reporting
| * | drm/edid: Fix the HDTV hack sync adjustmentAdam Jackson2010-07-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | We're adjusting horizontal timings only here, moving vsync was just a slavish translation of a typo in the X server. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm/radeon/kms: fix radeon mid power profile reportingDaniel J Blueman2010-07-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix incorrectly reporting 'default' power profile, when it is set to 'mid'. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2010-07-286-34/+63
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe [SCSI] zfcp: Update status read mempool [SCSI] zfcp: Do not wait for SBALs on stopped queue [SCSI] zfcp: Fix check whether unchained ct_els is possible [SCSI] ipr: fix resource path display and formatting
| * | | [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probeAnton Blanchard2010-07-271-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A driver needs to be ready to take an interrupt as soon as it registers an interrupt handler. I noticed the following oops when testing kdump: ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010) ibmvscsi 30000002: SRP_VERSION: 16.a ibmvscsi 30000002: SRP_VERSION: 16.a Unable to handle kernel paging request for data at address 0x00000000 ... pc: c000000004085e34: .tasklet_action+0xf4/0x1dc ... c000000004086fe4 .__do_softirq+0x16c/0x2c0 c00000000403138c .call_do_softirq+0x14/0x24 c00000000400ee14 .do_softirq+0xa0/0x104 c00000000408690c .irq_exit+0x70/0xd0 c00000000400f190 .do_IRQ+0x214/0x2a8 c000000004004804 hardware_interrupt_entry+0x1c/0x98 --- Exception: 501 (Hardware Interrupt) at c00000000400c544 .raw_local_irq_restore+0x48/0x54 c00000000465d2a8 ._raw_spin_unlock_irqrestore+0x74/0xa0 c0000000040e7f00 .__setup_irq+0x2ec/0x3f0 c0000000040e8198 .request_threaded_irq+0x194/0x22c c00000000446d854 .rpavscsi_init_crq_queue+0x284/0x3f0 c00000000446c764 .ibmvscsi_probe+0x688/0x710 c00000000402903c .vio_bus_probe+0x37c/0x3e4 c000000004403f10 .driver_probe_device+0xec/0x1b8 c000000004404088 .__driver_attach+0xac/0xf4 c000000004403184 .bus_for_each_dev+0x98/0x104 c000000004403c98 .driver_attach+0x40/0x60 c0000000044026f0 .bus_add_driver+0x154/0x324 c0000000044045d0 .driver_register+0xe8/0x1ac c00000000402b2a8 .vio_register_driver+0x54/0x74 c000000004933ea4 .ibmvscsi_module_init+0x80/0xc0 c000000004009834 .do_one_initcall+0x98/0x1d8 c0000000049005b4 .kernel_init+0x27c/0x33c c000000004031550 .kernel_thread+0x54/0x70 srp_task needs to be setup before request_irq. The patch below fixes the oops. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] zfcp: Update status read mempoolChristof Schmitt2010-07-212-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93 changed the way status read buffers are handled but forgot to adjust the mempool to the new size. Add the call to resize the mempool after the exchange config data. Also use the define instead of the hard coded number in the fsf callback for consistency. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] zfcp: Do not wait for SBALs on stopped queueChristof Schmitt2010-07-212-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trying to read the FC host statistics on an offline adapter results in a 5 seconds wait. Reading the statistics tries to issue an exchange port data request which first waits up to 5 seconds for an entry in the request queue. Change the strategy for getting a free SBAL to exit when the queue is stopped. Reading the statistics will then fail without the wait. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] zfcp: Fix check whether unchained ct_els is possibleSwen Schillig2010-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A false check was performed whether an unchained ct_els is possible or not. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] ipr: fix resource path display and formattingWayne Boyer2010-07-212-20/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was possible to overflow the buffer used to print out the formatted version of the resource path. The fix is to limit the number of bytes that get formatted. This patch also updates the ipr_show_resource_path function to display the resource address for devices that are attached to adapters that don't support resource paths. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2010-07-283-10/+32
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register wm8350-regulator: fix wm8350_register_regulator error handling ab3100: fix off-by-one value range checking for voltage selector
| * | | regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH registerAnuj Aggarwal2010-07-281-7/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> In TPS6507x, depending on the status of DEFDCDC{2,3} pin either DEFDCDC{2,3}_LOW or DEFDCDC{2,3}_HIGH register needs to be read or programmed to change the output voltage. The current driver assumes DEFDCDC{2,3} pins are always tied low and thus operates only on DEFDCDC{2,3}_LOW register. This need not always be the case (as is found on OMAP-L138 EVM). Unfortunately, software cannot read the status of DEFDCDC{2,3} pins. So, this information is passed through platform data depending on how the board is wired. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | | wm8350-regulator: fix wm8350_register_regulator error handlingAxel Lin2010-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of platform_device_add() fail, we should call platform_device_put() instead of platform_device_del() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | | ab3100: fix off-by-one value range checking for voltage selectorAxel Lin2010-07-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use voltage selector as an array index for typ_voltages. Thus the valid range for voltage selector should be 0..voltages_len-1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | gpio: fix spurious printk when freeing a gpioJon Povey2010-07-271-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When freeing a gpio that has not been exported, gpio_unexport() prints a debug message when it should just fall through silently. Example spurious message: gpio_unexport: gpio0 status -22 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Cc: David Brownell <david-b@pacbell.net> Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de> Cc: Gregory Bean <gbean@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | edac: mpc85xx: fix coldplug/hotplug module autoloadingAnton Vorontsov2010-07-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC85xx EDAC driver is missing module device aliases, so the driver won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Dave Jiang <djiang@mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | drivers/rtc/rtc-rx8581.c: fix setdatetimeRudolf Marek2010-07-271-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the logic while writing new date/time to the chip. The driver incorrectly wrote back register values to different registers and even with wrong mask. The patch adds clearing of the VLF register, which should be cleared if all date/time values are set. Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Martyn Welch <martyn.welch@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge git://git.infradead.org/users/cbou/battery-2.6.35Linus Torvalds2010-07-271-15/+14
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/users/cbou/battery-2.6.35: ds2782_battery: Rename get_current to fix build failure / name conflict
| * | | | ds2782_battery: Rename get_current to fix build failure / name conflictPeter Huewe2010-06-141-15/+14
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the name of get_current function pointer to get_battery_current to resolve a name conflict with the get_current macro defined in current.h. This conflict resulted in a build-failure[1] for the sh4 arch allyesconfig: drivers/power/ds2782_battery.c:216:48: error: macro "get_current" passed 2 arguments, but takes just This patch fixes the issue. To be consistent the other function pointers (_voltage,_capacity) were renamed too. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-07-2712-25/+92
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: s2io: fixing DBG_PRINT() macro ath9k: fix dma direction for map/unmap in ath_rx_tasklet net: dev_forward_skb should call nf_reset net sched: fix race in mirred device removal tun: avoid BUG, dump packet on GSO errors bonding: set device in RLB ARP packet handler wimax/i2400m: Add PID & VID for Intel WiMAX 6250 ipv6: Don't add routes to ipv6 disabled interfaces. net: Fix skb_copy_expand() handling of ->csum_start net: Fix corruption of skb csum field in pskb_expand_head() of net/core/skbuff.c macvtap: Limit packet queue length ixgbe/igb: catch invalid VF settings bnx2x: Advance a module version bnx2x: Protect statistics ramrod and sequence number bnx2x: Protect a SM state change wireless: use netif_rx_ni in ieee80211_send_layer2_update
| * | | | s2io: fixing DBG_PRINT() macroBreno Leitao2010-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 9e39f7c5b311a306977c5471f9e2ce4c456aa038 changed the DBG_PRINT() macro and the if clause was wrongly changed. It means that currently all the DBG_PRINT are being printed, flooding the kernel log buffer with things like: s2io: eth6: Next block at: c0000000b9c90000 s2io: eth6: In Neterion Tx routine Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | Merge branch 'master' of ↵David S. Miller2010-07-261-2/+2
| |\ \ \ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | | | ath9k: fix dma direction for map/unmap in ath_rx_taskletMing Lei2010-07-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For edma, we should use DMA_BIDIRECTIONAL, or else use DMA_FROM_DEVICE. This is found to address "BUG at arch/x86/mm/physaddr.c:5" as described here: http://lkml.org/lkml/2010/7/14/21 Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | | | Merge branch 'wimax-2.6.35.y' of ↵David S. Miller2010-07-242-0/+3
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
| | * | | | | wimax/i2400m: Add PID & VID for Intel WiMAX 6250Alexey Shvetsov2010-07-222-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This version of intel wimax device was found in my IBM ThinkPad x201 Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
| * | | | | | tun: avoid BUG, dump packet on GSO errorsMichael S. Tsirkin2010-07-241-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are still some LRO cards that cause GSO errors in tun, and BUG on this is an unfriendly way to tell the admin to disable LRO. Further, experience shows we might have more GSO bugs lurking. See https://bugzilla.kernel.org/show_bug.cgi?id=16413 as a recent example. dumping a packet will make it easier to figure it out. Replace BUG with warning+dump+drop the packet to make GSO errors in tun less critical and easier to debug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alex Unigovsky <unik@compot.ru> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | bonding: set device in RLB ARP packet handlerGreg Edwards2010-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After: commit 6146b1a4da98377e4abddc91ba5856bef8f23f1e Author: Jay Vosburgh <fubar@us.ibm.com> Date: Tue Nov 4 17:51:15 2008 -0800 bonding: Fix ALB mode to balance traffic on VLANs the dev field in the RLB ARP packet handler was set to NULL to wildcard and accommodate balancing VLANs on top of bonds. This has the side-effect of the packet handler being called against other, non RLB-enabled bonds, and a kernel oops results when it tries to dereference rx_hashtbl in rlb_update_entry_from_arp(), which won't be set for those bonds, e.g. active-backup. With the __netif_receive_skb() changes from: commit 1f3c8804acba841b5573b953f5560d2683d2db0d Author: Andy Gospodarek <andy@greyhouse.net> Date: Mon Dec 14 10:48:58 2009 +0000 bonding: allow arp_ip_targets on separate vlans to use arp validation frames received on VLANs correctly make their way to the bond's handler, so we no longer need to wildcard the device. The oops can be reproduced by: modprobe bonding echo active-backup > /sys/class/net/bond0/bonding/mode echo 100 > /sys/class/net/bond0/bonding/miimon ifconfig bond0 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx echo +eth0 > /sys/class/net/bond0/bonding/slaves echo +eth1 > /sys/class/net/bond0/bonding/slaves echo +bond1 > /sys/class/net/bonding_masters echo balance-alb > /sys/class/net/bond1/bonding/mode echo 100 > /sys/class/net/bond1/bonding/miimon ifconfig bond1 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx echo +eth2 > /sys/class/net/bond1/bonding/slaves echo +eth3 > /sys/class/net/bond1/bonding/slaves Pass some traffic on bond0. Boom. [ Tested, behaves as advertised. I do not believe a test of the bonding mode is necessary, as there is no race between the packet handler and the bonding mode changing (the mode can only change when the device is closed). Also updated the log message to include the reproduction and full commit ids. -J ] Signed-off-by: Greg Edwards <greg.edwards@hp.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | macvtap: Limit packet queue lengthHerbert Xu2010-07-222-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark Wagner reported OOM symptoms when sending UDP traffic over a macvtap link to a kvm receiver. This appears to be caused by the fact that macvtap packet queues are unlimited in length. This means that if the receiver can't keep up with the rate of flow, then we will hit OOM. Of course it gets worse if the OOM killer then decides to kill the receiver. This patch imposes a cap on the packet queue length, in the same way as the tuntap driver, using the device TX queue length. Please note that macvtap currently has no way of giving congestion notification, that means the software device TX queue cannot be used and packets will always be dropped once the macvtap driver queue fills up. This shouldn't be a great problem for the scenario where macvtap is used to feed a kvm receiver, as the traffic is most likely external in origin so congestion notification can't be applied anyway. Of course, if anybody decides to complain about guest-to-guest UDP packet loss down the track, then we may have to revisit this. Incidentally, this patch also fixes a real memory leak when macvtap_get_queue fails. Chris Wright noticed that for this patch to work, we need a non-zero TX queue length. This patch includes his work to change the default macvtap TX queue length to 500. Reported-by: Mark Wagner <mwagner@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | ixgbe/igb: catch invalid VF settingsAndy Gospodarek2010-07-212-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ixgbe cards put an invalid VF device ID in the PCIe SR-IOV capability. The ixgbe driver is only valid for PFs or non SR-IOV hardware. It seems that the same problem could occur on igb hardware as well, so if we discover we are trying to initialize a VF in ixbge_probe or igb_probe, print an error and exit. Based on a patch for ixgbe from Chris Wright <chrisw@sous-sol.org>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | bnx2x: Advance a module versionVladislav Zolotarov2010-07-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Advance a module version to 1.52.53-2. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | bnx2x: Protect statistics ramrod and sequence numberVladislav Zolotarov2010-07-211-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug fix: Protect statistics ramrod sending code and a statistics counter update with a spinlock. Otherwise there was a race condition that would allow sending a statistics ramrods with the same sequence number or with sequence numbers not in a natural order, which would cause a FW assert. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | bnx2x: Protect a SM state changeVladislav Zolotarov2010-07-212-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug fix: Protect the statistics state machine state update with a spinlock. Otherwise there was a race condition that would cause the statistics to stay enabled despite the fact that they were disabled in the LINK_DOWN event handler. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | | | Merge branch 'fixes' of ↵Linus Torvalds2010-07-261-10/+2
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
| * | | | | | | [CPUFREQ] fix memory leak in cpufreq_add_devXiaotian Feng2010-07-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We didn't free policy->related_cpus in error path err_unlock_policy. This is catched by following kmemleak report: unreferenced object 0xffff88022a0b96d0 (size 512): comm "modprobe", pid 886, jiffies 4294689177 (age 780.694s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8111ebe5>] create_object+0x186/0x281 [<ffffffff814fad4f>] kmemleak_alloc+0x60/0xa7 [<ffffffff8111127a>] kmem_cache_alloc_node_notrace+0x120/0x142 [<ffffffff81262e4f>] alloc_cpumask_var_node+0x2c/0xd7 [<ffffffff81262f0b>] alloc_cpumask_var+0x11/0x13 [<ffffffff81262f1c>] zalloc_cpumask_var+0xf/0x11 [<ffffffff8140fac0>] cpufreq_add_dev+0x11f/0x547 [<ffffffff81334bda>] sysdev_driver_register+0xc2/0x11d [<ffffffff8140e334>] cpufreq_register_driver+0xcb/0x1b8 [<ffffffffa032e040>] 0xffffffffa032e040 [<ffffffff810021ba>] do_one_initcall+0x5e/0x15c [<ffffffff81087f94>] sys_init_module+0xa6/0x1e6 [<ffffffff81009bc2>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | | | | | | [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call ↵Andrej Gelenberg2010-07-261-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (second call site)" 395913d0b1db37092ea3d9d69b832183b1dd84c5 ("[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)") is not needed, because there is no rwsem lock in cpufreq_ondemand and cpufreq_conservative anymore. Lock should not be released until the work done. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=1594 Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Dave Jones <davej@redhat.com>
* | | | | | | | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2010-07-265-23/+23
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Set io_map_base for several PCI bridges lacking it MIPS: Alchemy: Define eth platform devices in the correct order MIPS: BCM63xx: Prevent second enet registration on BCM6338 MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations. MIPS: N32: Define getdents64. MIPS: MTX-1: Fix PCI on the MeshCube and related boards MIPS: Make init_vdso a subsys_initcall. MIPS: "Fix" useless 'init_vdso successfully' message. MIPS: PowerTV: Move register setup to before reading registers. SOUND: Au1000: Fix section mismatch VIDEO: Au1100fb: Fix section mismatch VIDEO: PMAGB-B: Fix section mismatch VIDEO: PMAG-BA: Fix section mismatch NET: declance: Fix section mismatches VIDEO. gbefb: Fix section mismatches.
| * | | | | | | | VIDEO: Au1100fb: Fix section mismatchRalf Baechle2010-07-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe() The variable au1100fb_driver references the function __init au1100fb_drv_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing which triggers of a slew of further mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_fix. If au1100fb_fix is only used by au1100fb_drv_probe then annotate au1100fb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_var. If au1100fb_var is only used by au1100fb_drv_probe then annotate au1100fb_var with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | | | | | | VIDEO: PMAGB-B: Fix section mismatchRalf Baechle2010-07-261-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. Fixing this one triggers a few more mismatches in order: WARNING: drivers/video/built-in.o(.devinit.text+0x414): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_fix The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_fix. If pmagbbfb_fix is only used by pmagbbfb_probe then annotate pmagbbfb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x45c): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_defined The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_defined. If pmagbbfb_defined is only used by pmagbbfb_probe then annotate pmagbbfb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5fc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_screen_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_screen_setup(). If pmagbbfb_screen_setup is only used by pmagbbfb_probe then annotate pmagbbfb_screen_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x6f4): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_osc_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_osc_setup(). If pmagbbfb_osc_setup is only used by pmagbbfb_probe then annotate pmagbbfb_osc_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5f8): Section mismatch in reference from the function pmagbbfb_osc_setup() to the variable .init.data:pmagbbfb_freqs.15993 The function __devinit pmagbbfb_osc_setup() references a variable __initdata pmagbbfb_freqs.15993. If pmagbbfb_freqs.15993 is only used by pmagbbfb_osc_setup then annotate pmagbbfb_freqs.15993 with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | | | | | | VIDEO: PMAG-BA: Fix section mismatchRalf Baechle2010-07-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe() The variable pmagbafb_driver references the function __init pmagbafb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one triggers 2 more: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_defined. If pmagbafb_defined is only used by pmagbafb_probe then annotate pmagbafb_defined with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | | | | | | NET: declance: Fix section mismatchesRalf Baechle2010-07-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/net/built-in.o(.data+0x24): Section mismatch in reference from the variable dec_lance_tc_driver to the function .init.text:dec_lance_tc_probe() The variable dec_lance_tc_driver references the function __init dec_lance_tc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one results in a new mismatch: WARNING: drivers/net/built-in.o(.devinit.text+0x14): Section mismatch in reference from the function dec_lance_tc_probe() to the function .init.text:dec_lance_probe() The function __devinit dec_lance_tc_probe() references a function __init dec_lance_probe(). If dec_lance_probe is only used by dec_lance_tc_probe then annotate dec_lance_probe with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | | | | | | VIDEO. gbefb: Fix section mismatches.Ralf Baechle2010-07-261-8/+8
| | |_|_|_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | | | | | | drm/i915: make sure we shut off the panel in eDP configsJesse Barnes2010-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix error from the last pull request. Making sure we shut the panel off is more correct and saves power. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2010-07-2616-24/+84
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: musb: tusb6010: fix compile error with n8x0_defconfig USB: FTDI: Add support for the RT System VX-7 radio programming cable USB: add quirk for Broadcom BT dongle USB: usb-storage: fix initializations of urb fields USB: xhci: Set Mult field in endpoint context correctly. USB: sisusbvga: Fix for USB 3.0 USB: adds Artisman USB dongle to list of quirky devices USB: xhci: Set EP0 dequeue ptr after reset of configured device. USB: Fix USB3.0 Port Speed Downgrade after port reset USB: xHCI: Fix another bug in link TRB activation change. USB: option: Add support for AMOI Skypephone S2 USB: New PIDs for Qualcomm gobi 2000 (qcserial) USB: ftdi_sio: support for Signalyzer tools based on FTDI chips USB: s3c2410_udc: be aware of connected gadget driver USB: Expose vendor-specific ACM channel on Nokia 5230 USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c USB: option: add support for 1da5:4518
| * | | | | | | | USB: musb: tusb6010: fix compile error with n8x0_defconfigFelipe Balbi2010-07-261-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop the unnecessary empty stubs in tusb6010.c and avoid a compile error when building kernel for n8x0. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | | | | USB: FTDI: Add support for the RT System VX-7 radio programming cableCorey Minyard2010-07-262-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | | | | USB: add quirk for Broadcom BT dongleOliver Neukum2010-07-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device needs to be reset when resuming Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | | | | USB: usb-storage: fix initializations of urb fieldsBob Copeland2010-07-261-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0ede76fcec5415ef82a423a95120286895822e2d, "USB: remove uses of URB_NO_SETUP_DMA_MAP" introduced a regression by inadvertantly removing initialization of the transfer flags. This caused initialization failures in the ums-karma driver. Fix the regression by zeroing it. While at it, as Alan Stern points out, the initializers for actual_length and status are handled by the core and error_count only matters for isochronous urbs, so they don't need to be set here. Remove them. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>