path: root/drivers/net/can/sja1000/sja1000.h
Commit message (Collapse)AuthorAgeFilesLines
* can: Fix SJA1000 command register writes on SMP systemsOliver Hartkopp2010-05-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | The SJA1000 command register is concurrently written in the rx-path to free the receive buffer _and_ in the tx-path to start the transmission. The SJA1000 data sheet, 6.4.4 COMMAND REGISTER (CMR) states: "Between two commands at least one internal clock cycle is needed in order to proceed. The internal clock is half of the external oscillator frequency." On SMP systems the current implementation leads to a write stall in the tx-path, which can be solved by adding some general locking and some time to settle the write_reg() operation for the command register. Thanks to Klaus Hitschler for the original fix and detailed problem description. This patch applies on net-2.6 and (with some offsets) on net-next-2.6 . Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: make the number of echo skb's configurableWolfgang Grandegger2009-10-131-0/+2
| | | | | | | | | | | | | | | | | This patch allows the CAN controller driver to define the number of echo skb's used for the local loopback (echo), as suggested by Kurt Van Dijck, with the function: struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); The CAN drivers have been adapted accordingly. For the ems_usb driver, as suggested by Sebastian Haas, the number of echo skb's has been increased to 10, which improves the transmission performance a lot. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: sja1000: stop misusing member base_addr of struct net_deviceWolfgang Grandegger2009-06-011-4/+5
| | | | | | | | | | | | | | As discussed on the netdev mailing list, the member "base_addr" of "struct net_device" should not be (mis)used to store the virtual address to the SJA1000 register area. According to David Miller, it's only use is to allow ISA and similar primitive bus devices to have their I/O ports changed via ifconfig. The virtual address is now stored in the private data structure of the SJA1000 device and the callback functions use "struct sja1000_priv" instead of the unneeded "struct net_device". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: Driver for the SJA1000 CAN controllerWolfgang Grandegger2009-05-181-0/+180
This patch adds the generic Socket-CAN driver for the Philips SJA1000 full CAN controller. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>