aboutsummaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/can/Kbuild1
-rw-r--r--include/linux/can/dev.h70
-rw-r--r--include/linux/can/netlink.h113
-rw-r--r--include/linux/can/platform/sja1000.h35
-rw-r--r--include/linux/etherdevice.h27
-rw-r--r--include/linux/ethtool.h15
-rw-r--r--include/linux/fs_enet_pd.h6
-rw-r--r--include/linux/ieee80211.h60
-rw-r--r--include/linux/if.h3
-rw-r--r--include/linux/if_packet.h21
-rw-r--r--include/linux/if_tun.h1
-rw-r--r--include/linux/if_tunnel.h2
-rw-r--r--include/linux/if_vlan.h6
-rw-r--r--include/linux/in.h1
-rw-r--r--include/linux/ipv6.h6
-rw-r--r--include/linux/mISDNdsp.h4
-rw-r--r--include/linux/mISDNhw.h2
-rw-r--r--include/linux/mISDNif.h19
-rw-r--r--include/linux/mdio.h347
-rw-r--r--include/linux/mii.h34
-rw-r--r--include/linux/mmc/sdio_ids.h2
-rw-r--r--include/linux/net_dropmon.h8
-rw-r--r--include/linux/netdevice.h227
-rw-r--r--include/linux/nl80211.h178
-rw-r--r--include/linux/of.h3
-rw-r--r--include/linux/of_mdio.h22
-rw-r--r--include/linux/pci_ids.h4
-rw-r--r--include/linux/phy.h10
-rw-r--r--include/linux/rfkill.h14
-rw-r--r--include/linux/sched.h6
-rw-r--r--include/linux/skbuff.h11
-rw-r--r--include/linux/smsc911x.h10
-rw-r--r--include/linux/snmp.h10
-rw-r--r--include/linux/socket.h7
-rw-r--r--include/linux/spi/wl12xx.h31
-rw-r--r--include/linux/tcp.h4
-rw-r--r--include/linux/usb/usbnet.h1
-rw-r--r--include/linux/wimax.h7
-rw-r--r--include/net/cfg80211.h1008
-rw-r--r--include/net/fib_rules.h2
-rw-r--r--include/net/genetlink.h2
-rw-r--r--include/net/inet_sock.h3
-rw-r--r--include/net/ip.h3
-rw-r--r--include/net/ip_fib.h3
-rw-r--r--include/net/ipip.h7
-rw-r--r--include/net/ipv6.h15
-rw-r--r--include/net/iucv/af_iucv.h9
-rw-r--r--include/net/mac80211.h247
-rw-r--r--include/net/regulatory.h101
-rw-r--r--include/net/snmp.h19
-rw-r--r--include/net/tcp.h59
-rw-r--r--include/net/wireless.h472
-rw-r--r--include/scsi/libfcoe.h2
-rw-r--r--include/trace/napi.h11
54 files changed, 2362 insertions, 929 deletions
diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
index eff898aac02..8cb05aae661 100644
--- a/include/linux/can/Kbuild
+++ b/include/linux/can/Kbuild
@@ -1,3 +1,4 @@
header-y += raw.h
header-y += bcm.h
header-y += error.h
+header-y += netlink.h
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
new file mode 100644
index 00000000000..4a37a56f6cd
--- /dev/null
+++ b/include/linux/can/dev.h
@@ -0,0 +1,70 @@
+/*
+ * linux/can/dev.h
+ *
+ * Definitions for the CAN network device driver interface
+ *
+ * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
+ * Varma Electronics Oy
+ *
+ * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ */
+
+#ifndef CAN_DEV_H
+#define CAN_DEV_H
+
+#include <linux/can/netlink.h>
+#include <linux/can/error.h>
+
+/*
+ * CAN mode
+ */
+enum can_mode {
+ CAN_MODE_STOP = 0,
+ CAN_MODE_START,
+ CAN_MODE_SLEEP
+};
+
+/*
+ * CAN common private data
+ */
+#define CAN_ECHO_SKB_MAX 4
+
+struct can_priv {
+ struct can_device_stats can_stats;
+
+ struct can_bittiming bittiming;
+ struct can_bittiming_const *bittiming_const;
+ struct can_clock clock;
+
+ enum can_state state;
+ u32 ctrlmode;
+
+ int restart_ms;
+ struct timer_list restart_timer;
+
+ struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX];
+
+ int (*do_set_bittiming)(struct net_device *dev);
+ int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
+ int (*do_get_state)(const struct net_device *dev,
+ enum can_state *state);
+};
+
+struct net_device *alloc_candev(int sizeof_priv);
+void free_candev(struct net_device *dev);
+
+int open_candev(struct net_device *dev);
+void close_candev(struct net_device *dev);
+
+int register_candev(struct net_device *dev);
+void unregister_candev(struct net_device *dev);
+
+int can_restart_now(struct net_device *dev);
+void can_bus_off(struct net_device *dev);
+
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx);
+void can_get_echo_skb(struct net_device *dev, int idx);
+
+#endif /* CAN_DEV_H */
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
new file mode 100644
index 00000000000..9ecbb7871c0
--- /dev/null
+++ b/include/linux/can/netlink.h
@@ -0,0 +1,113 @@
+/*
+ * linux/can/netlink.h
+ *
+ * Definitions for the CAN netlink interface
+ *
+ * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#ifndef CAN_NETLINK_H
+#define CAN_NETLINK_H
+
+#include <linux/types.h>
+
+/*
+ * CAN bit-timing parameters
+ *
+ * For futher information, please read chapter "8 BIT TIMING
+ * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
+ * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
+ */
+struct can_bittiming {
+ __u32 bitrate; /* Bit-rate in bits/second */
+ __u32 sample_point; /* Sample point in one-tenth of a percent */
+ __u32 tq; /* Time quanta (TQ) in nanoseconds */
+ __u32 prop_seg; /* Propagation segment in TQs */
+ __u32 phase_seg1; /* Phase buffer segment 1 in TQs */
+ __u32 phase_seg2; /* Phase buffer segment 2 in TQs */
+ __u32 sjw; /* Synchronisation jump width in TQs */
+ __u32 brp; /* Bit-rate prescaler */
+};
+
+/*
+ * CAN harware-dependent bit-timing constant
+ *
+ * Used for calculating and checking bit-timing parameters
+ */
+struct can_bittiming_const {
+ char name[16]; /* Name of the CAN controller hardware */
+ __u32 tseg1_min; /* Time segement 1 = prop_seg + phase_seg1 */
+ __u32 tseg1_max;
+ __u32 tseg2_min; /* Time segement 2 = phase_seg2 */
+ __u32 tseg2_max;
+ __u32 sjw_max; /* Synchronisation jump width */
+ __u32 brp_min; /* Bit-rate prescaler */
+ __u32 brp_max;
+ __u32 brp_inc;
+};
+
+/*
+ * CAN clock parameters
+ */
+struct can_clock {
+ __u32 freq; /* CAN system clock frequency in Hz */
+};
+
+/*
+ * CAN operational and error states
+ */
+enum can_state {
+ CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */
+ CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */
+ CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */
+ CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */
+ CAN_STATE_STOPPED, /* Device is stopped */
+ CAN_STATE_SLEEPING, /* Device is sleeping */
+ CAN_STATE_MAX
+};
+
+/*
+ * CAN controller mode
+ */
+struct can_ctrlmode {
+ __u32 mask;
+ __u32 flags;
+};
+
+#define CAN_CTRLMODE_LOOPBACK 0x1 /* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY 0x2 /* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES 0x4 /* Triple sampling mode */
+
+/*
+ * CAN device statistics
+ */
+struct can_device_stats {
+ __u32 bus_error; /* Bus errors */
+ __u32 error_warning; /* Changes to error warning state */
+ __u32 error_passive; /* Changes to error passive state */
+ __u32 bus_off; /* Changes to bus off state */
+ __u32 arbitration_lost; /* Arbitration lost errors */
+ __u32 restarts; /* CAN controller re-starts */
+};
+
+/*
+ * CAN netlink interface
+ */
+enum {
+ IFLA_CAN_UNSPEC,
+ IFLA_CAN_BITTIMING,
+ IFLA_CAN_BITTIMING_CONST,
+ IFLA_CAN_CLOCK,
+ IFLA_CAN_STATE,
+ IFLA_CAN_CTRLMODE,
+ IFLA_CAN_RESTART_MS,
+ IFLA_CAN_RESTART,
+ __IFLA_CAN_MAX
+};
+
+#define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1)
+
+#endif /* CAN_NETLINK_H */
diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h
new file mode 100644
index 00000000000..01ee2aeb048
--- /dev/null
+++ b/include/linux/can/platform/sja1000.h
@@ -0,0 +1,35 @@
+#ifndef _CAN_PLATFORM_SJA1000_H_
+#define _CAN_PLATFORM_SJA1000_H_
+
+/* clock divider register */
+#define CDR_CLKOUT_MASK 0x07
+#define CDR_CLK_OFF 0x08 /* Clock off (CLKOUT pin) */
+#define CDR_RXINPEN 0x20 /* TX1 output is RX irq output */
+#define CDR_CBP 0x40 /* CAN input comparator bypass */
+#define CDR_PELICAN 0x80 /* PeliCAN mode */
+
+/* output control register */
+#define OCR_MODE_BIPHASE 0x00
+#define OCR_MODE_TEST 0x01
+#define OCR_MODE_NORMAL 0x02
+#define OCR_MODE_CLOCK 0x03
+#define OCR_MODE_MASK 0x07
+#define OCR_TX0_INVERT 0x04
+#define OCR_TX0_PULLDOWN 0x08
+#define OCR_TX0_PULLUP 0x10
+#define OCR_TX0_PUSHPULL 0x18
+#define OCR_TX1_INVERT 0x20
+#define OCR_TX1_PULLDOWN 0x40
+#define OCR_TX1_PULLUP 0x80
+#define OCR_TX1_PUSHPULL 0xc0
+#define OCR_TX_MASK 0xfc
+#define OCR_TX_SHIFT 2
+
+struct sja1000_platform_data {
+ u32 clock; /* CAN bus oscillator frequency in Hz */
+
+ u8 ocr; /* output control register */
+ u8 cdr; /* clock divider register */
+};
+
+#endif /* !_CAN_PLATFORM_SJA1000_H_ */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index a1f17abba7d..3d7a6687d24 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -182,6 +182,33 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
return compare_ether_addr(addr1, addr2);
#endif
}
+
+/**
+ * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
+ * @dev: Pointer to a device structure
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Compare passed address with all addresses of the device. Return true if the
+ * address if one of the device addresses.
+ *
+ * Note that this function calls compare_ether_addr_64bits() so take care of
+ * the right padding.
+ */
+static inline bool is_etherdev_addr(const struct net_device *dev,
+ const u8 addr[6 + 2])
+{
+ struct netdev_hw_addr *ha;
+ int res = 1;
+
+ rcu_read_lock();
+ for_each_dev_addr(dev, ha) {
+ res = compare_ether_addr_64bits(addr, ha->addr);
+ if (!res)
+ break;
+ }
+ rcu_read_unlock();
+ return !res;
+}
#endif /* __KERNEL__ */
/**
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 131b127b70f..380b04272bf 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -26,11 +26,13 @@ struct ethtool_cmd {
__u8 phy_address;
__u8 transceiver; /* Which transceiver to use */
__u8 autoneg; /* Enable or disable autonegotiation */
+ __u8 mdio_support;
__u32 maxtxpkt; /* Tx pkts before generating tx int */
__u32 maxrxpkt; /* Rx pkts before generating rx int */
__u16 speed_hi;
__u16 reserved2;
- __u32 reserved[3];
+ __u32 lp_advertising; /* Features the link partner advertises */
+ __u32 reserved[2];
};
static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
@@ -563,6 +565,11 @@ struct ethtool_ops {
#define SUPPORTED_Pause (1 << 13)
#define SUPPORTED_Asym_Pause (1 << 14)
#define SUPPORTED_2500baseX_Full (1 << 15)
+#define SUPPORTED_Backplane (1 << 16)
+#define SUPPORTED_1000baseKX_Full (1 << 17)
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
+#define SUPPORTED_10000baseKR_Full (1 << 19)
+#define SUPPORTED_10000baseR_FEC (1 << 20)
/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
@@ -581,6 +588,11 @@ struct ethtool_ops {
#define ADVERTISED_Pause (1 << 13)
#define ADVERTISED_Asym_Pause (1 << 14)
#define ADVERTISED_2500baseX_Full (1 << 15)
+#define ADVERTISED_Backplane (1 << 16)
+#define ADVERTISED_1000baseKX_Full (1 << 17)
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
+#define ADVERTISED_10000baseKR_Full (1 << 19)
+#define ADVERTISED_10000baseR_FEC (1 << 20)
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
@@ -605,6 +617,7 @@ struct ethtool_ops {
#define PORT_MII 0x02
#define PORT_FIBRE 0x03
#define PORT_BNC 0x04
+#define PORT_OTHER 0xff
/* Which transceiver to use. */
#define XCVR_INTERNAL 0x00
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 8300cab30f9..51b793466ff 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -17,6 +17,7 @@
#define FS_ENET_PD_H
#include <linux/string.h>
+#include <linux/of_mdio.h>
#include <asm/types.h>
#define FS_ENET_NAME "fs_enet"
@@ -130,10 +131,7 @@ struct fs_platform_info {
u32 device_flags;
- int phy_addr; /* the phy address (-1 no phy) */
- char bus_id[16];
- int phy_irq; /* the phy irq (if it exists) */
-
+ struct device_node *phy_node;
const struct fs_mii_bus_info *bus_info;
int rx_ring, tx_ring; /* number of buffers on rx */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 4b501b48ce8..34de8b21f6d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -493,6 +493,7 @@ struct ieee80211s_hdr {
/* Mesh flags */
#define MESH_FLAGS_AE_A4 0x1
#define MESH_FLAGS_AE_A5_A6 0x2
+#define MESH_FLAGS_AE 0x3
#define MESH_FLAGS_PS_DEEP 0x4
/**
@@ -540,10 +541,10 @@ struct ieee80211_tim_ie {
u8 dtim_period;
u8 bitmap_ctrl;
/* variable size: 1 - 251 bytes */
- u8 virtual_map[0];
+ u8 virtual_map[1];
} __attribute__ ((packed));
-#define WLAN_SA_QUERY_TR_ID_LEN 16
+#define WLAN_SA_QUERY_TR_ID_LEN 2
struct ieee80211_mgmt {
__le16 frame_control;
@@ -1068,8 +1069,12 @@ enum ieee80211_category {
WLAN_CATEGORY_DLS = 2,
WLAN_CATEGORY_BACK = 3,
WLAN_CATEGORY_PUBLIC = 4,
+ WLAN_CATEGORY_HT = 7,
WLAN_CATEGORY_SA_QUERY = 8,
+ WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
WLAN_CATEGORY_WMM = 17,
+ WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
+ WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
/* SPECTRUM_MGMT action code */
@@ -1081,6 +1086,14 @@ enum ieee80211_spectrum_mgmt_actioncode {
WLAN_ACTION_SPCT_CHL_SWITCH = 4,
};
+/* Security key length */
+enum ieee80211_key_len {
+ WLAN_KEY_LEN_WEP40 = 5,
+ WLAN_KEY_LEN_WEP104 = 13,
+ WLAN_KEY_LEN_CCMP = 16,
+ WLAN_KEY_LEN_TKIP = 32,
+};
+
/*
* IEEE 802.11-2007 7.3.2.9 Country information element
*
@@ -1261,7 +1274,9 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
if (ieee80211_has_protected(hdr->frame_control))
return true;
category = ((u8 *) hdr) + 24;
- return *category != WLAN_CATEGORY_PUBLIC;
+ return *category != WLAN_CATEGORY_PUBLIC &&
+ *category != WLAN_CATEGORY_HT &&
+ *category != WLAN_CATEGORY_VENDOR_SPECIFIC;
}
return false;
@@ -1383,4 +1398,43 @@ static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
return -1;
}
+/**
+ * ieee80211_tu_to_usec - convert time units (TU) to microseconds
+ * @tu: the TUs
+ */
+static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
+{
+ return 1024 * tu;
+}
+
+/**
+ * ieee80211_check_tim - check if AID bit is set in TIM
+ * @tim: the TIM IE
+ * @tim_len: length of the TIM IE
+ * @aid: the AID to look for
+ */
+static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
+ u8 tim_len, u16 aid)
+{
+ u8 mask;
+ u8 index, indexn1, indexn2;
+
+ if (unlikely(!tim || tim_len < sizeof(*tim)))
+ return false;
+
+ aid &= 0x3fff;
+ index = aid / 8;
+ mask = 1 << (aid & 7);
+
+ indexn1 = tim->bitmap_ctrl & 0xfe;
+ indexn2 = tim_len + indexn1 - 4;
+
+ if (index < indexn1 || index > indexn2)
+ return false;
+
+ index -= indexn1;
+
+ return !!(tim->virtual_map[index] & mask);
+}
+
#endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index 1108f3e099e..b9a6229f3be 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -67,6 +67,9 @@
#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */
+#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
+ * release skb->dst
+ */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index 18db0668065..dea7d6b7cf9 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -46,6 +46,8 @@ struct sockaddr_ll
#define PACKET_VERSION 10
#define PACKET_HDRLEN 11
#define PACKET_RESERVE 12
+#define PACKET_TX_RING 13
+#define PACKET_LOSS 14
struct tpacket_stats
{
@@ -63,14 +65,22 @@ struct tpacket_auxdata
__u16 tp_vlan_tci;
};
+/* Rx ring - header status */
+#define TP_STATUS_KERNEL 0x0
+#define TP_STATUS_USER 0x1
+#define TP_STATUS_COPY 0x2
+#define TP_STATUS_LOSING 0x4
+#define TP_STATUS_CSUMNOTREADY 0x8
+
+/* Tx ring - header status */
+#define TP_STATUS_AVAILABLE 0x0
+#define TP_STATUS_SEND_REQUEST 0x1
+#define TP_STATUS_SENDING 0x2
+#define TP_STATUS_WRONG_FORMAT 0x4
+
struct tpacket_hdr
{
unsigned long tp_status;
-#define TP_STATUS_KERNEL 0
-#define TP_STATUS_USER 1
-#define TP_STATUS_COPY 2
-#define TP_STATUS_LOSING 4
-#define TP_STATUS_CSUMNOTREADY 8
unsigned int tp_len;
unsigned int tp_snaplen;
unsigned short tp_mac;
@@ -135,5 +145,6 @@ struct packet_mreq
#define PACKET_MR_MULTICAST 0
#define PACKET_MR_PROMISC 1
#define PACKET_MR_ALLMULTI 2
+#define PACKET_MR_UNICAST 3
#endif
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 049d6c9428d..915ba5789f0 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -55,6 +55,7 @@
#define IFF_NO_PI 0x1000
#define IFF_ONE_QUEUE 0x2000
#define IFF_VNET_HDR 0x4000
+#define IFF_TUN_EXCL 0x8000
/* Features for GSO (TUNSETOFFLOAD). */
#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 5a9aae4adb4..5eb9b0f857e 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -44,7 +44,7 @@ struct ip_tunnel_prl {
__u16 flags;
__u16 __reserved;
__u32 datalen;
- __u32 __reserved2;
+ __u32 rs_delay;
/* data follows */
};
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index e1ff5b14310..7ff9af1d0f0 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -118,8 +118,7 @@ extern int vlan_hwaccel_do_receive(struct sk_buff *skb);
extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci, struct sk_buff *skb);
extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
- unsigned int vlan_tci,
- struct napi_gro_fraginfo *info);
+ unsigned int vlan_tci);
#else
static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
@@ -154,8 +153,7 @@ static inline int vlan_gro_receive(struct napi_struct *napi,
}
static inline int vlan_gro_frags(struct napi_struct *napi,
- struct vlan_group *grp, unsigned int vlan_tci,
- struct napi_gro_fraginfo *info)
+ struct vlan_group *grp, unsigned int vlan_tci)
{
return NET_RX_DROP;
}
diff --git a/include/linux/in.h b/include/linux/in.h
index d60122a3a08..cf196da04ec 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -107,6 +107,7 @@ struct in_addr {
#define MCAST_JOIN_SOURCE_GROUP 46
#define MCAST_LEAVE_SOURCE_GROUP 47
#define MCAST_MSFILTER 48
+#define IP_MULTICAST_ALL 49
#define MCAST_EXCLUDE 0
#define MCAST_INCLUDE 1
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 476d9464ac8..c662efa6828 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -169,6 +169,12 @@ struct ipv6_devconf {
__s32 accept_dad;
void *sysctl;
};
+
+struct ipv6_params {
+ __s32 disable_ipv6;
+ __s32 autoconf;
+};
+extern struct ipv6_params ipv6_defaults;
#endif
/* index values for the variables in ipv6_devconf */
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
index 6b71d2dce50..41d1eeb9b3b 100644
--- a/include/linux/mISDNdsp.h
+++ b/include/linux/mISDNdsp.h
@@ -12,7 +12,8 @@ struct mISDN_dsp_element {
void *(*new)(const char *arg);
void (*free)(void *p);
void (*process_tx)(void *p, unsigned char *data, int len);
- void (*process_rx)(void *p, unsigned char *data, int len);
+ void (*process_rx)(void *p, unsigned char *data, int len,
+ unsigned int txlen);
int num_args;
struct mISDN_dsp_element_arg
*args;
@@ -24,6 +25,7 @@ extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
struct dsp_features {
int hfc_id; /* unique id to identify the chip (or -1) */
int hfc_dtmf; /* set if HFCmulti card supports dtmf */
+ int hfc_conf; /* set if HFCmulti card supports conferences */
int hfc_loops; /* set if card supports tone loops */
int hfc_echocanhw; /* set if card supports echocancelation*/
int pcm_id; /* unique id to identify the pcm bus (or -1) */
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
index 97ffdc1d344..ce900f4c245 100644
--- a/include/linux/mISDNhw.h
+++ b/include/linux/mISDNhw.h
@@ -185,7 +185,7 @@ extern int dchannel_senddata(struct dchannel *, struct sk_buff *);
extern int bchannel_senddata(struct bchannel *, struct sk_buff *);
extern void recv_Dchannel(struct dchannel *);
extern void recv_Echannel(struct dchannel *, struct dchannel *);
-extern void recv_Bchannel(struct bchannel *);
+extern void recv_Bchannel(struct bchannel *, unsigned int id);
extern void recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
extern void recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
extern void confirm_Bsend(struct bchannel *bch);
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 5da3d95b27f..45100b39a7c 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -229,6 +229,7 @@
#define OPTION_L2_PTP 2
#define OPTION_L2_FIXEDTEI 3
#define OPTION_L2_CLEANUP 4
+#define OPTION_L1_HOLD 5
/* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
#define MISDN_MAX_IDLEN 20
@@ -291,19 +292,19 @@ struct mISDN_devrename {
/* MPH_INFORMATION_REQ payload */
struct ph_info_ch {
- __u32 protocol;
- __u64 Flags;
+ __u32 protocol;
+ __u64 Flags;
};
struct ph_info_dch {
- struct ph_info_ch ch;
- __u16 state;
- __u16 num_bch;
+ struct ph_info_ch ch;
+ __u16 state;
+ __u16 num_bch;
};
struct ph_info {
- struct ph_info_dch dch;
- struct ph_info_ch bch[];
+ struct ph_info_dch dch;
+ struct ph_info_ch bch[];
};
/* timer device ioctl */
@@ -317,6 +318,7 @@ struct ph_info {
#define IMCTRLREQ _IOR('I', 69, int)
#define IMCLEAR_L2 _IOR('I', 70, int)
#define IMSETDEVNAME _IOR('I', 71, struct mISDN_devrename)
+#define IMHOLD_L1 _IOR('I', 72, int)
static inline int
test_channelmap(u_int nr, u_char *map)
@@ -362,7 +364,8 @@ clear_channelmap(u_int nr, u_char *map)
#define MISDN_CTRL_HFC_RECEIVE_ON 0x4006
#define MISDN_CTRL_HFC_ECHOCAN_ON 0x4007
#define MISDN_CTRL_HFC_ECHOCAN_OFF 0x4008
-
+#define MISDN_CTRL_HFC_WD_INIT 0x4009
+#define MISDN_CTRL_HFC_WD_RESET 0x400A
/* socket options */
#define MISDN_TIME_STAMP 0x0001
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644
index 00000000000..56851646529
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,347 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
+ * Physical Medium Dependent */
+#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
+#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
+#define MDIO_MMD_TC 6 /* Transmission Convergence */
+#define MDIO_MMD_AN 7 /* Auto-Negotiation */
+#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
+#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
+#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1 MII_BMCR
+#define MDIO_STAT1 MII_BMSR
+#define MDIO_DEVID1 MII_PHYSID1
+#define MDIO_DEVID2 MII_PHYSID2
+#define MDIO_SPEED 4 /* Speed ability */
+#define MDIO_DEVS1 5 /* Devices in package */
+#define MDIO_DEVS2 6
+#define MDIO_CTRL2 7 /* 10G control 2 */
+#define MDIO_STAT2 8 /* 10G status 2 */
+#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1 14 /* Package identifier */
+#define MDIO_PKGID2 15
+#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
+#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
+ * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
+#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER BMCR_PDOWN
+#define MDIO_CTRL1_RESET BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
+#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
+#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
+#define MDIO_STAT1_FAULT 0x0080 /* Fault */
+#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
+#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G 0x0001 /* 10G capable */
+#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
+#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
+#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
+#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
+#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
+#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
+#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
+#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
+#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
+#define MDIO_PMA_10GBT_SNR_MAX 127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
+#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45 0x8000
+#define MDIO_PHY_ID_PRTAD 0x03e0
+#define MDIO_PHY_ID_DEVAD 0x001f
+#define MDIO_PHY_ID_C45_MASK \
+ (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+ return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+static inline bool mdio_phy_id_is_c45(int phy_id)
+{
+ return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
+}
+
+static inline __u16 mdio_phy_id_prtad(int phy_id)
+{
+ return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+}
+
+static inline __u16 mdio_phy_id_devad(int phy_id)
+{
+ return phy_id & MDIO_PHY_ID_DEVAD;
+}
+
+#define MDIO_SUPPORTS_C22 1
+#define MDIO_SUPPORTS_C45 2
+
+#ifdef __KERNEL__
+
+/**
+ * struct mdio_if_info - Ethernet controller MDIO interface
+ * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
+ * @mmds: Mask of MMDs expected to be present in the PHY. This must be
+ * non-zero unless @prtad = %MDIO_PRTAD_NONE.
+ * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then
+ * MII register access will be passed through with @devad =
+ * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to
+ * commonly used clause 22 registers will be translated into
+ * clause 45 registers.
+ * @dev: Net device structure
+ * @mdio_read: Register read function; returns value or negative error code
+ * @mdio_write: Register write function; returns 0 or negative error code
+ */
+struct mdio_if_info {
+ int prtad;
+ u32 __bitwise mmds;
+ unsigned mode_support;
+
+ struct net_device *dev;
+ int (*mdio_read)(struct net_device *dev, int prtad, int devad,
+ u16 addr);
+ int (*mdio_write)(struct net_device *dev, int prtad, int devad,
+ u16 addr, u16 val);
+};
+
+#define MDIO_PRTAD_NONE (-1)
+#define MDIO_DEVAD_NONE (-1)
+#define MDIO_EMULATE_C22 4
+
+struct ethtool_cmd;
+struct ethtool_pauseparam;
+extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
+extern int mdio_set_flag(const struct mdio_if_info *mdio,
+ int prtad, int devad, u16 addr, int mask,
+ bool sense);
+extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
+extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
+extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
+ struct ethtool_cmd *ecmd,
+ u32 npage_adv, u32 npage_lpa);
+extern void
+mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
+ const struct ethtool_pauseparam *ecmd);
+
+/**
+ * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them. Use
+ * mdio45_ethtool_gset_npage() to specify advertisement bits from next
+ * pages.
+ */
+static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
+ struct ethtool_cmd *ecmd)
+{
+ mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
+}
+
+extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
+ struct mii_ioctl_data *mii_data, int cmd);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index ad748588faf..359fba88027 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -240,6 +240,22 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock,
}
/**
+ * mii_advertise_flowctrl - get flow control advertisement flags
+ * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
+ */
+static inline u16 mii_advertise_flowctrl(int cap)
+{
+ u16 adv = 0;
+
+ if (cap & FLOW_CTRL_RX)
+ adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ if (cap & FLOW_CTRL_TX)
+ adv ^= ADVERTISE_PAUSE_ASYM;
+
+ return adv;
+}
+
+/**
* mii_resolve_flowctrl_fdx
* @lcladv: value of MII ADVERTISE register
* @rmtadv: value of MII LPA register
@@ -250,18 +266,12 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
{
u8 cap = 0;
- if (lcladv & ADVERTISE_PAUSE_CAP) {
- if (lcladv & ADVERTISE_PAUSE_ASYM) {
- if (rmtadv & LPA_PAUSE_CAP)
- cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
- else if (rmtadv & LPA_PAUSE_ASYM)
- cap = FLOW_CTRL_RX;
- } else {
- if (rmtadv & LPA_PAUSE_CAP)
- cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
- }
- } else if (lcladv & ADVERTISE_PAUSE_ASYM) {
- if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM))
+ if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
+ cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
+ } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
+ if (lcladv & ADVERTISE_PAUSE_CAP)
+ cap = FLOW_CTRL_RX;
+ else if (rmtadv & ADVERTISE_PAUSE_CAP)
cap = FLOW_CTRL_TX;
}
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index ea1bf5ba092..c7211ab6dd4 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -25,5 +25,7 @@
#define SDIO_VENDOR_ID_MARVELL 0x02df
#define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
+#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104
+#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105
#endif
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
index 0217fb81a63..e8a8b5c50ed 100644
--- a/include/linux/net_dropmon.h
+++ b/include/linux/net_dropmon.h
@@ -2,12 +2,20 @@
#define __NET_DROPMON_H
#include <linux/netlink.h>
+#include <linux/types.h>
struct net_dm_drop_point {
__u8 pc[8];
__u32 count;
};
+#define is_drop_point_hw(x) do {\
+ int ____i, ____j;\
+ for (____i = 0; ____i < 8; i ____i++)\
+ ____j |= x[____i];\
+ ____j;\
+} while (0)
+
#define NET_DM_CFG_VERSION 0
#define NET_DM_CFG_ALERT_COUNT 1
#define NET_DM_CFG_ALERT_DELAY 2
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5a96a1a406e..bbfabf3012b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -39,9 +39,11 @@
#include <linux/device.h>
#include <linux/percpu.h>
+#include <linux/rculist.h>
#include <linux/dmaengine.h>
#include <linux/workqueue.h>
+#include <linux/ethtool.h>
#include <net/net_namespace.h>
#include <net/dsa.h>
#ifdef CONFIG_DCB
@@ -49,7 +51,6 @@
#endif
struct vlan_group;
-struct ethtool_ops;
struct netpoll_info;
/* 802.11 specific */
struct wireless_dev;
@@ -210,6 +211,19 @@ struct dev_addr_list
#define dmi_users da_users
#define dmi_gusers da_gusers
+struct netdev_hw_addr {
+ struct list_head list;
+ unsigned char addr[MAX_ADDR_LEN];
+ unsigned char type;
+#define NETDEV_HW_ADDR_T_LAN 1
+#define NETDEV_HW_ADDR_T_SAN 2
+#define NETDEV_HW_ADDR_T_SLAVE 3
+#define NETDEV_HW_ADDR_T_UNICAST 4
+ int refcount;
+ bool synced;
+ struct rcu_head rcu_head;
+};
+
struct hh_cache
{
struct hh_cache *hh_next; /* Next entry */
@@ -447,12 +461,25 @@ enum netdev_queue_state_t
};
struct netdev_queue {
+/*
+ * read mostly part
+ */
struct net_device *dev;
struct Qdisc *qdisc;
unsigned long state;
- spinlock_t _xmit_lock;
- int xmit_lock_owner;
struct Qdisc *qdisc_sleeping;
+/*
+ * write mostly part
+ */
+ spinlock_t _xmit_lock ____cacheline_aligned_in_smp;
+ int xmit_lock_owner;
+ /*
+ * please use this field instead of dev->trans_start
+ */
+ unsigned long trans_start;
+ unsigned long tx_bytes;
+ unsigned long tx_packets;
+ unsigned long tx_dropped;
} ____cacheline_aligned_in_smp;
@@ -670,7 +697,9 @@ struct net_device
#define NETIF_F_GRO 16384 /* Generic receive offload */
#define NETIF_F_LRO 32768 /* large receive offload */
+/* the GSO_MASK reserves bits 16 through 23 */
#define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */
+#define NETIF_F_SCTP_CSUM (1 << 25) /* SCTP checksum offload */
/* Segmentation offload features */
#define NETIF_F_GSO_SHIFT 16
@@ -747,10 +776,11 @@ struct net_device
unsigned char addr_len; /* hardware address length */
unsigned short dev_id; /* for shared network cards */
- spinlock_t addr_list_lock;
- struct dev_addr_list *uc_list; /* Secondary unicast mac addresses */
+ struct list_head uc_list; /* Secondary unicast mac
+ addresses */
int uc_count; /* Number of installed ucasts */
int uc_promisc;
+ spinlock_t addr_list_lock;
struct dev_addr_list *mc_list; /* Multicast mac addresses */
int mc_count; /* Number of installed mcasts */
unsigned int promiscuity;
@@ -776,8 +806,11 @@ struct net_device
*/
unsigned long last_rx; /* Time of last Rx */
/* Interface address info used in eth_type_trans() */
- unsigned char dev_addr[MAX_ADDR_LEN]; /* hw address, (before bcast
- because most packets are unicast) */
+ unsigned char *dev_addr; /* hw address, (before bcast
+ because most packets are
+ unicast) */
+
+ struct list_head dev_addr_list; /* list of device hw addresses */
unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */
@@ -797,6 +830,11 @@ struct net_device
* One part is mostly used on xmit path (device)
*/
/* These may be needed for future network-power-down code. */
+
+ /*
+ * trans_start here is expensive for high speed devices on SMP,
+ * please use netdev_queue->trans_start instead.
+ */
unsigned long trans_start; /* Time (in jiffies) of last Tx */
int watchdog_timeo; /* used by dev_watchdog() */
@@ -867,49 +905,10 @@ struct net_device
/* max exchange id for FCoE LRO by ddp */
unsigned int fcoe_ddp_xid;
#endif
-
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
- struct {
- int (*init)(struct net_device *dev);
- void (*uninit)(struct net_device *dev);
- int (*open)(struct net_device *dev);
- int (*stop)(struct net_device *dev);
- int (*hard_start_xmit) (struct sk_buff *skb,
- struct net_device *dev);
- u16 (*select_queue)(struct net_device *dev,
- struct sk_buff *skb);
- void (*change_rx_flags)(struct net_device *dev,
- int flags);
- void (*set_rx_mode)(struct net_device *dev);
- void (*set_multicast_list)(struct net_device *dev);
- int (*set_mac_address)(struct net_device *dev,
- void *addr);
- int (*validate_addr)(struct net_device *dev);
- int (*do_ioctl)(struct net_device *dev,
- struct ifreq *ifr, int cmd);
- int (*set_config)(struct net_device *dev,
- struct ifmap *map);
- int (*change_mtu)(struct net_device *dev, int new_mtu);
- int (*neigh_setup)(struct net_device *dev,
- struct neigh_parms *);
- void (*tx_timeout) (struct net_device *dev);
- struct net_device_stats* (*get_stats)(struct net_device *dev);
- void (*vlan_rx_register)(struct net_device *dev,
- struct vlan_group *grp);
- void (*vlan_rx_add_vid)(struct net_device *dev,
- unsigned short vid);
- void (*vlan_rx_kill_vid)(struct net_device *dev,
- unsigned short vid);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- void (*poll_controller)(struct net_device *dev);
-#endif
- };
-#endif
};
#define to_net_dev(d) container_of(d, struct net_device, dev)
#define NETDEV_ALIGN 32
-#define NETDEV_ALIGN_CONST (NETDEV_ALIGN - 1)
static inline
struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
@@ -980,9 +979,7 @@ static inline bool netdev_uses_trailer_tags(struct net_device *dev)
*/
static inline void *netdev_priv(const struct net_device *dev)
{
- return (char *)dev + ((sizeof(struct net_device)
- + NETDEV_ALIGN_CONST)
- & ~NETDEV_ALIGN_CONST);
+ return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
}
/* Set the sysfs physical device reference for the network logical device
@@ -1012,6 +1009,12 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
void netif_napi_del(struct napi_struct *napi);
struct napi_gro_cb {
+ /* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */
+ void *frag0;
+
+ /* Length of frag0. */
+ unsigned int frag0_len;
+
/* This indicates where we are processing relative to skb->data. */
int data_offset;
@@ -1047,14 +1050,6 @@ struct packet_type {
struct list_head list;
};
-struct napi_gro_fraginfo {
- skb_frag_t frags[MAX_SKB_FRAGS];
- unsigned int nr_frags;
- unsigned int ip_summed;
- unsigned int len;
- __wsum csum;
-};
-
#include <linux/interrupt.h>
#include <linux/notifier.h>
@@ -1119,9 +1114,9 @@ extern int dev_restart(struct net_device *dev);
#ifdef CONFIG_NETPOLL_TRAP
extern int netpoll_trap(void);
#endif
-extern void *skb_gro_header(struct sk_buff *skb, unsigned int hlen);
extern int skb_gro_receive(struct sk_buff **head,
struct sk_buff *skb);
+extern void skb_gro_reset_offset(struct sk_buff *skb);
static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
{
@@ -1138,16 +1133,34 @@ static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
NAPI_GRO_CB(skb)->data_offset += len;
}
-static inline void skb_gro_reset_offset(struct sk_buff *skb)
+static inline void *skb_gro_header_fast(struct sk_buff *skb,
+ unsigned int offset)
{
- NAPI_GRO_CB(skb)->data_offset = 0;
+ return NAPI_GRO_CB(skb)->frag0 + offset;
+}
+
+static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen)
+{
+ return NAPI_GRO_CB(skb)->frag0_len < hlen;
+}
+
+static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
+ unsigned int offset)
+{
+ NAPI_GRO_CB(skb)->frag0 = NULL;
+ NAPI_GRO_CB(skb)->frag0_len = 0;
+ return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
}
static inline void *skb_gro_mac_header(struct sk_buff *skb)
{
- return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) :
- page_address(skb_shinfo(skb)->frags[0].page) +
- skb_shinfo(skb)->frags[0].page_offset;
+ return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb);
+}
+
+static inline void *skb_gro_network_header(struct sk_buff *skb)
+{
+ return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) +
+ skb_network_offset(skb);
}
static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
@@ -1442,12 +1455,18 @@ extern int napi_gro_receive(struct napi_struct *napi,
struct sk_buff *skb);
extern void napi_reuse_skb(struct napi_struct *napi,
struct sk_buff *skb);
-extern struct sk_buff * napi_fraginfo_skb(struct napi_struct *napi,
- struct napi_gro_fraginfo *info);
+extern struct sk_buff * napi_get_frags(struct napi_struct *napi);
extern int napi_frags_finish(struct napi_struct *napi,
struct sk_buff *skb, int ret);
-extern int napi_gro_frags(struct napi_struct *napi,
- struct napi_gro_fraginfo *info);
+extern struct sk_buff * napi_frags_skb(struct napi_struct *napi);
+extern int napi_gro_frags(struct napi_struct *napi);
+
+static inline void napi_free_frags(struct napi_struct *napi)
+{
+ kfree_skb(napi->skb);
+ napi->skb = NULL;
+}
+
extern void netif_nit_deliver(struct sk_buff *skb);
extern int dev_valid_name(const char *name);
extern int dev_ioctl(struct net *net, unsigned int cmd, void __user *);
@@ -1514,6 +1533,8 @@ static inline int netif_carrier_ok(const struct net_device *dev)
return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
}
+extern unsigned long dev_trans_start(struct net_device *dev);
+
extern void __netdev_watchdog_up(struct net_device *dev);
extern void netif_carrier_on(struct net_device *dev);
@@ -1671,6 +1692,12 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
spin_unlock_bh(&txq->_xmit_lock);
}
+static inline void txq_trans_update(struct netdev_queue *txq)
+{
+ if (txq->xmit_lock_owner != -1)
+ txq->trans_start = jiffies;
+}
+
/**
* netif_tx_lock - grab network device transmit lock
* @dev: network device
@@ -1778,6 +1805,13 @@ static inline void netif_addr_unlock_bh(struct net_device *dev)
spin_unlock_bh(&dev->addr_list_lock);
}
+/*
+ * dev_addr_list walker. Should be used only for read access. Call with
+ * rcu_read_lock held.
+ */
+#define for_each_dev_addr(dev, ha) \
+ list_for_each_entry_rcu(ha, &dev->dev_addr_list, list)
+
/* These functions live elsewhere (drivers/net/net_init.c, but related) */
extern void ether_setup(struct net_device *dev);
@@ -1790,11 +1824,24 @@ extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
alloc_netdev_mq(sizeof_priv, name, setup, 1)
extern int register_netdev(struct net_device *dev);
extern void unregister_netdev(struct net_device *dev);
+
+/* Functions used for device addresses handling */
+extern int dev_addr_add(struct net_device *dev, unsigned char *addr,
+ unsigned char addr_type);
+extern int dev_addr_del(struct net_device *dev, unsigned char *addr,
+ unsigned char addr_type);
+extern int dev_addr_add_multiple(struct net_device *to_dev,
+ struct net_device *from_dev,
+ unsigned char addr_type);
+extern int dev_addr_del_multiple(struct net_device *to_dev,
+ struct net_device *from_dev,
+ unsigned char addr_type);
+
/* Functions used for secondary unicast and multicast support */
extern void dev_set_rx_mode(struct net_device *dev);
extern void __dev_set_rx_mode(struct net_device *dev);
-extern int dev_unicast_delete(struct net_device *dev, void *addr, int alen);
-extern int dev_unicast_add(struct net_device *dev, void *addr, int alen);
+extern int dev_unicast_delete(struct net_device *dev, void *addr);
+extern int dev_unicast_add(struct net_device *dev, void *addr);
extern int dev_unicast_sync(struct net_device *to, struct net_device *from);
extern void dev_unicast_unsync(struct net_device *to, struct net_device *from);
extern int dev_mc_delete(struct net_device *dev, void *addr, int alen, int all);
@@ -1874,6 +1921,16 @@ static inline void netif_set_gso_max_size(struct net_device *dev,
dev->gso_max_size = size;
}
+static inline void skb_bond_set_mac_by_master(struct sk_buff *skb,
+ struct net_device *master)
+{
+ if (skb->pkt_type == PACKET_HOST) {
+ u16 *dest = (u16 *) eth_hdr(skb)->h_dest;
+
+ memcpy(dest, master->dev_addr, ETH_ALEN);
+ }
+}
+
/* On bonding slaves other than the currently active slave, suppress
* duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and
* ARP on active-backup slaves with arp_validate enabled.
@@ -1887,6 +1944,14 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
if (master->priv_flags & IFF_MASTER_ARPMON)
dev->last_rx = jiffies;
+ if ((master->priv_flags & IFF_MASTER_ALB) && master->br_port) {
+ /* Do address unmangle. The local destination address
+ * will be always the one master has. Provides the right
+ * functionality in a bridge.
+ */
+ skb_bond_set_mac_by_master(skb, master);
+ }
+
if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
skb->protocol == __cpu_to_be16(ETH_P_ARP))
@@ -1908,6 +1973,28 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
}
extern struct pernet_operations __net_initdata loopback_net_ops;
+
+static inline int dev_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+ return -EOPNOTSUPP;
+ return dev->ethtool_ops->get_settings(dev, cmd);
+}
+
+static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
+{
+ if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum)
+ return 0;
+ return dev->ethtool_ops->get_rx_csum(dev);
+}
+
+static inline u32 dev_ethtool_get_flags(struct net_device *dev)
+{
+ if (!dev->ethtool_ops || !dev->ethtool_ops->get_flags)
+ return 0;
+ return dev->ethtool_ops->get_flags(dev);
+}
#endif /* __KERNEL__ */
-#endif /* _LINUX_DEV_H */
+#endif /* _LINUX_NETDEVICE_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index cbe8ce3bf48..dbea93b694e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -7,7 +7,7 @@
* Copyright 2008 Michael Wu <flamingice@sourmilk.net>
* Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
* Copyright 2008 Michael Buesch <mb@bu3sch.de>
- * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
*
@@ -25,6 +25,8 @@
*
*/
+#include <linux/types.h>
+
/**
* DOC: Station handling
*
@@ -46,8 +48,10 @@
* to get a list of all present wiphys.
* @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
* %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
* %NL80211_ATTR_WIPHY_NAME.
@@ -75,8 +79,8 @@
* @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
* %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
* @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
- * attributes.
+ * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ * and %NL80211_ATTR_KEY_SEQ attributes.
* @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
* or %NL80211_ATTR_MAC.
*
@@ -166,6 +170,22 @@
* set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
* %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
* to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * has been found while world roaming thus enabling active scan or
+ * any mode of operation that initiates TX (beacons) on a channel
+ * where we would not have been able to do either before. As an example
+ * if you are world roaming (regulatory domain set to world or if your
+ * driver is using a custom world roaming regulatory domain) and while
+ * doing a passive scan on the 5 GHz band you find an AP there (if not
+ * on a DFS channel) you will now be able to actively scan for that AP
+ * or use AP mode on your card on that same channel. Note that this will
+ * never be used for channels 1-11 on the 2 GHz band as they are always
+ * enabled world wide. This beacon hint is only sent if your device had
+ * either disabled active scanning or beaconing on a channel. We send to
+ * userspace the wiphy on which we removed a restriction from
+ * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * the beacon hint was processed.
*
* @NL80211_CMD_AUTHENTICATE: authentication request and notification.
* This command is used both as a command (request to authenticate) and
@@ -185,8 +205,12 @@
* frame, i.e., it was for the local STA and was received in correct
* state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
* MLME SAP interface (kernel providing MLME, userspace SME). The
- * included NL80211_ATTR_FRAME attribute contains the management frame
- * (including both the header and frame body, but not FCS).
+ * included %NL80211_ATTR_FRAME attribute contains the management frame
+ * (including both the header and frame body, but not FCS). This event is
+ * also used to indicate if the authentication attempt timed out. In that
+ * case the %NL80211_ATTR_FRAME attribute is replaced with a
+ * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ * pending authentication timed out).
* @NL80211_CMD_ASSOCIATE: association request and notification; like
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
@@ -199,6 +223,25 @@
* NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
* MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
*
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ * event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ * event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ * FREQ attribute (for the initial frequency if no peer can be found)
+ * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ * should be fixed rather than automatically determined. Can only be
+ * executed on a network interface that is UP, and fixed BSSID/FREQ
+ * may be rejected. Another optional parameter is the beacon interval,
+ * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ * given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ * determined by the network interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -260,6 +303,13 @@ enum nl80211_commands {
NL80211_CMD_DEAUTHENTICATE,
NL80211_CMD_DISASSOCIATE,
+ NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+ NL80211_CMD_REG_BEACON_HINT,
+
+ NL80211_CMD_JOIN_IBSS,
+ NL80211_CMD_LEAVE_IBSS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -278,6 +328,7 @@ enum nl80211_commands {
#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
/**
* enum nl80211_attrs - nl80211 netlink attributes
@@ -296,6 +347,18 @@ enum nl80211_commands {
* NL80211_CHAN_HT20 = HT20 only
* NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
* NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ * less than or equal to the RTS threshold; allowed range: 1..255;
+ * dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ * greater than the RTS threshold; allowed range: 1..255;
+ * dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ * length in octets for frames; allowed range: 256..8000, disable
+ * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ * larger than or equal to this use RTS/CTS handshake); allowed range:
+ * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
*
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
* @NL80211_ATTR_IFNAME: network interface name
@@ -319,7 +382,7 @@ enum nl80211_commands {
*
* @NL80211_ATTR_STA_AID: Association ID for the station (u16)
* @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- * &enum nl80211_sta_flags.
+ * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
* @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
* IEEE 802.11 7.3.1.6 (u16).
* @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
@@ -380,6 +443,8 @@ enum nl80211_commands {
*
* @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
* a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ * that can be added to a scan request
*
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -408,6 +473,44 @@ enum nl80211_commands {
* @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
* %NL80211_CMD_DISASSOCIATE, u16
*
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ * a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _before_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _after_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ * cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ * for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ * used for the association (&enum nl80211_mfp, represented as a u32);
+ * this attribute can be used
+ * with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ * &struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ * request, the driver will assume that the port is unauthorized until
+ * authorized by user space. Otherwise, port is marked authorized by
+ * default in station mode.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -492,6 +595,30 @@ enum nl80211_attrs {
NL80211_ATTR_AUTH_TYPE,
NL80211_ATTR_REASON_CODE,
+ NL80211_ATTR_KEY_TYPE,
+
+ NL80211_ATTR_MAX_SCAN_IE_LEN,
+ NL80211_ATTR_CIPHER_SUITES,
+
+ NL80211_ATTR_FREQ_BEFORE,
+ NL80211_ATTR_FREQ_AFTER,
+
+ NL80211_ATTR_FREQ_FIXED,
+
+
+ NL80211_ATTR_WIPHY_RETRY_SHORT,
+ NL80211_ATTR_WIPHY_RETRY_LONG,
+ NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+ NL80211_ATTR_TIMED_OUT,
+
+ NL80211_ATTR_USE_MFP,
+
+ NL80211_ATTR_STA_FLAGS2,
+
+ NL80211_ATTR_CONTROL_PORT,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -581,6 +708,18 @@ enum nl80211_sta_flags {
};
/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+ __u32 mask;
+ __u32 set;
+} __attribute__((packed));
+
+/**
* enum nl80211_rate_info - bitrate information
*
* These attribute types are used with %NL80211_STA_INFO_TXRATE
@@ -1062,4 +1201,27 @@ enum nl80211_auth_type {
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
};
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ */
+enum nl80211_key_type {
+ NL80211_KEYTYPE_GROUP,
+ NL80211_KEYTYPE_PAIRWISE,
+ NL80211_KEYTYPE_PEERKEY,
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+ NL80211_MFP_NO,
+ NL80211_MFP_REQUIRED,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/of.h b/include/linux/of.h
index 6a7efa242f5..7be2d1043c1 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -77,6 +77,9 @@ extern int of_n_size_cells(struct device_node *np);
extern const struct of_device_id *of_match_node(
const struct of_device_id *matches, const struct device_node *node);
extern int of_modalias_node(struct device_node *node, char *modalias, int len);
+extern struct device_node *of_parse_phandle(struct device_node *np,
+ const char *phandle_name,
+ int index);
extern int of_parse_phandles_with_args(struct device_node *np,
const char *list_name, const char *cells_name, int index,
struct device_node **out_node, const void **out_args);
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
new file mode 100644
index 00000000000..c9663c69030
--- /dev/null
+++ b/include/linux/of_mdio.h
@@ -0,0 +1,22 @@
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_MDIO_H
+#define __LINUX_OF_MDIO_H
+
+#include <linux/phy.h>
+#include <linux/of.h>
+
+extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
+extern struct phy_device *of_phy_find_device(struct device_node *phy_np);
+extern struct phy_device *of_phy_connect(struct net_device *dev,
+ struct device_node *phy_np,
+ void (*hndlr)(struct net_device *),
+ u32 flags, phy_interface_t iface);
+
+#endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 06ba90c211a..12db06cf0e2 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1914,6 +1914,8 @@
#define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540
#define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550
#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552
+#define PCI_SUBDEVICE_ID_CCD_JHSE1 0xB553
+#define PCI_SUBDEVICE_ID_CCD_JH8S 0xB55B
#define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560
#define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562
#define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563
@@ -2313,6 +2315,8 @@
#define PCI_VENDOR_ID_QMI 0x1a32
+#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 97e40cb6b58..b1368b8f657 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -79,7 +79,7 @@ typedef enum {
* Need to be a little smaller than phydev->dev.bus_id to leave room
* for the ":%02x"
*/
-#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3)
+#define MII_BUS_ID_SIZE (20 - 3)
/*
* The Bus class for PHYs. Devices which provide access to
@@ -407,7 +407,7 @@ struct phy_driver {
/* A Structure for boards to register fixups with the PHY Lib */
struct phy_fixup {
struct list_head list;
- char bus_id[BUS_ID_SIZE];
+ char bus_id[20];
u32 phy_uid;
u32 phy_uid_mask;
int (*run)(struct phy_device *phydev);
@@ -444,10 +444,16 @@ static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
+int phy_device_register(struct phy_device *phy);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+ u32 flags, phy_interface_t interface);
struct phy_device * phy_attach(struct net_device *dev,
const char *bus_id, u32 flags, phy_interface_t interface);
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+ void (*handler)(struct net_device *), u32 flags,
+ phy_interface_t interface);
struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface);
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 164332cbb77..de18ef227e0 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -52,23 +52,12 @@ enum rfkill_state {
RFKILL_STATE_MAX, /* marker for last valid state */
};
-/*
- * These are DEPRECATED, drivers using them should be verified to
- * comply with the rfkill usage guidelines in Documentation/rfkill.txt
- * and then converted to use the new names for rfkill_state
- */
-#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED
-#define RFKILL_STATE_ON RFKILL_STATE_UNBLOCKED
-
/**
* struct rfkill - rfkill control structure.
* @name: Name of the switch.
* @type: Radio type which the button controls, the value stored
* here should be a value from enum rfkill_type.
* @state: State of the switch, "UNBLOCKED" means radio can operate.
- * @user_claim_unsupported: Whether the hardware supports exclusive
- * RF-kill control by userspace. Set this before registering.
- * @user_claim: Set when the switch is controlled exlusively by userspace.
* @mutex: Guards switch state transitions. It serializes callbacks
* and also protects the state.
* @data: Pointer to the RF button drivers private data which will be
@@ -91,9 +80,6 @@ struct rfkill {
const char *name;
enum rfkill_type type;
- bool user_claim_unsupported;
- bool user_claim;
-
/* the mutex serializes callbacks and also protects
* the state */
struct mutex mutex;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b4c38bc8049..d853f6bb0ba 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2178,6 +2178,12 @@ static inline int test_tsk_need_resched(struct task_struct *tsk)
return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
}
+static inline int restart_syscall(void)
+{
+ set_tsk_thread_flag(current, TIF_SIGPENDING);
+ return -ERESTARTNOINTR;
+}
+
static inline int signal_pending(struct task_struct *p)
{
return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 5fd389162f0..aff494ba6a3 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -203,6 +203,9 @@ struct skb_shared_info {
#ifdef CONFIG_HAS_DMA
dma_addr_t dma_maps[MAX_SKB_FRAGS + 1];
#endif
+ /* Intermediate layers must ensure that destructor_arg
+ * remains valid until skb destructor */
+ void * destructor_arg;
};
/* We divide dataref into two halves. The higher 16 bits hold references
@@ -1715,8 +1718,14 @@ extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
struct iovec *iov);
extern int skb_copy_datagram_from_iovec(struct sk_buff *skb,
int offset,
- struct iovec *from,
+ const struct iovec *from,
+ int from_offset,
int len);
+extern int skb_copy_datagram_const_iovec(const struct sk_buff *from,
+ int offset,
+ const struct iovec *to,
+ int to_offset,
+ int size);
extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb);
extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
unsigned int flags);
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index b32725075d7..5241e4fb4ec 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -47,4 +47,14 @@ struct smsc911x_platform_config {
#define SMSC911X_FORCE_EXTERNAL_PHY (BIT(3))
#define SMSC911X_SAVE_MAC_ADDRESS (BIT(4))
+/*
+ * SMSC911X_SWAP_FIFO:
+ * Enables software byte swap for fifo data. Should only be used as a
+ * "last resort" in the case of big endian mode on boards with incorrectly
+ * routed data bus to older devices such as LAN9118. Newer devices such as
+ * LAN9221 can handle this in hardware, there are registers to control
+ * this swapping but the driver doesn't currently use them.
+ */
+#define SMSC911X_SWAP_FIFO (BIT(5))
+
#endif /* __LINUX_SMSC911X_H__ */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index aee3f1e1d1c..0f953fe4041 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -18,7 +18,7 @@
enum
{
IPSTATS_MIB_NUM = 0,
- IPSTATS_MIB_INRECEIVES, /* InReceives */
+ IPSTATS_MIB_INPKTS, /* InReceives */
IPSTATS_MIB_INHDRERRORS, /* InHdrErrors */
IPSTATS_MIB_INTOOBIGERRORS, /* InTooBigErrors */
IPSTATS_MIB_INNOROUTES, /* InNoRoutes */
@@ -28,7 +28,7 @@ enum
IPSTATS_MIB_INDISCARDS, /* InDiscards */
IPSTATS_MIB_INDELIVERS, /* InDelivers */
IPSTATS_MIB_OUTFORWDATAGRAMS, /* OutForwDatagrams */
- IPSTATS_MIB_OUTREQUESTS, /* OutRequests */
+ IPSTATS_MIB_OUTPKTS, /* OutRequests */
IPSTATS_MIB_OUTDISCARDS, /* OutDiscards */
IPSTATS_MIB_OUTNOROUTES, /* OutNoRoutes */
IPSTATS_MIB_REASMTIMEOUT, /* ReasmTimeout */
@@ -42,6 +42,12 @@ enum
IPSTATS_MIB_OUTMCASTPKTS, /* OutMcastPkts */
IPSTATS_MIB_INBCASTPKTS, /* InBcastPkts */
IPSTATS_MIB_OUTBCASTPKTS, /* OutBcastPkts */
+ IPSTATS_MIB_INOCTETS, /* InOctets */
+ IPSTATS_MIB_OUTOCTETS, /* OutOctets */
+ IPSTATS_MIB_INMCASTOCTETS, /* InMcastOctets */
+ IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */
+ IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */
+ IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */
__IPSTATS_MIB_MAX
};
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 421afb4d29b..d2310cb45d2 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -303,14 +303,15 @@ struct ucred {
#define SOL_BLUETOOTH 274
#define SOL_PNPIPE 275
#define SOL_RDS 276
+#define SOL_IUCV 277
/* IPX options */
#define IPX_TYPE 1
#ifdef __KERNEL__
extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
-extern int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov,
- int offset, int len);
+extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
+ int offset, int len);
extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
struct iovec *iov,
int offset,
@@ -318,6 +319,8 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
+extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
+ int offset, int len);
extern int move_addr_to_user(struct sockaddr *kaddr, int klen, void __user *uaddr, int __user *ulen);
extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr);
extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
new file mode 100644
index 00000000000..11430cab2aa
--- /dev/null
+++ b/include/linux/spi/wl12xx.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_SPI_WL12XX_H
+#define _LINUX_SPI_WL12XX_H
+
+struct wl12xx_platform_data {
+ void (*set_power)(bool enable);
+};
+
+#endif
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 9d5078bd23a..8afac76cd74 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -377,7 +377,7 @@ struct tcp_sock {
unsigned int keepalive_time; /* time before keep alive takes place */
unsigned int keepalive_intvl; /* time interval between keep alive probes */
- unsigned long last_synq_overflow;
+ int linger2;
/* Receiver side RTT estimation */
struct {
@@ -406,8 +406,6 @@ struct tcp_sock {
/* TCP MD5 Signagure Option information */
struct tcp_md5sig_info *md5sig_info;
#endif
-
- int linger2;
};
static inline struct tcp_sock *tcp_sk(const struct sock *sk)
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 36fabb95c7d..5d44059f6d6 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -183,6 +183,7 @@ extern void usbnet_tx_timeout (struct net_device *net);
extern int usbnet_change_mtu (struct net_device *net, int new_mtu);
extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
extern void usbnet_defer_kevent (struct usbnet *, int);
extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
extern void usbnet_unlink_rx_urbs(struct usbnet *);
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
index c89de7f4e5b..4fdcc563551 100644
--- a/include/linux/wimax.h
+++ b/include/linux/wimax.h
@@ -59,7 +59,7 @@ enum {
* M - Major: change if removing or modifying an existing call.
* m - minor: change when adding a new call
*/
- WIMAX_GNL_VERSION = 00,
+ WIMAX_GNL_VERSION = 01,
/* Generic NetLink attributes */
WIMAX_GNL_ATTR_INVALID = 0x00,
WIMAX_GNL_ATTR_MAX = 10,
@@ -78,6 +78,7 @@ enum {
WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */
WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */
WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */
+ WIMAX_GNL_OP_STATE_GET, /* Request for current state */
};
@@ -113,6 +114,10 @@ enum {
WIMAX_GNL_RESET_IFIDX = 1,
};
+/* Atributes for wimax_state_get() */
+enum {
+ WIMAX_GNL_STGET_IFIDX = 1,
+};
/*
* Attributes for the Report State Change
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5389afdc129..f20da7d63b1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1,71 +1,220 @@
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
+/*
+ * 802.11 device and configuration interface
+ *
+ * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/list.h>
#include <linux/netlink.h>
#include <linux/skbuff.h>
#include <linux/nl80211.h>
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/genetlink.h>
+#include <net/regulatory.h>
+
/* remove once we remove the wext stuff */
#include <net/iw_handler.h>
+#include <linux/wireless.h>
+
/*
- * 802.11 configuration in-kernel interface
+ * wireless hardware capability structures
+ */
+
+/**
+ * enum ieee80211_band - supported frequency bands
+ *
+ * The bands are assigned this way because the supported
+ * bitrates differ in these bands.
*
- * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
+ * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
*/
+enum ieee80211_band {
+ IEEE80211_BAND_2GHZ,
+ IEEE80211_BAND_5GHZ,
+
+ /* keep last */
+ IEEE80211_NUM_BANDS
+};
/**
- * struct vif_params - describes virtual interface parameters
- * @mesh_id: mesh ID to use
- * @mesh_id_len: length of the mesh ID
+ * enum ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ * on this channel.
+ * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * is not permitted.
+ * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * is not permitted.
*/
-struct vif_params {
- u8 *mesh_id;
- int mesh_id_len;
+enum ieee80211_channel_flags {
+ IEEE80211_CHAN_DISABLED = 1<<0,
+ IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
+ IEEE80211_CHAN_NO_IBSS = 1<<2,
+ IEEE80211_CHAN_RADAR = 1<<3,
+ IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
+ IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
};
-/* Radiotap header iteration
- * implemented in net/wireless/radiotap.c
- * docs in Documentation/networking/radiotap-headers.txt
+#define IEEE80211_CHAN_NO_HT40 \
+ (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+
+/**
+ * struct ieee80211_channel - channel definition
+ *
+ * This structure describes a single channel for use
+ * with cfg80211.
+ *
+ * @center_freq: center frequency in MHz
+ * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
+ * @hw_value: hardware-specific value for the channel
+ * @flags: channel flags from &enum ieee80211_channel_flags.
+ * @orig_flags: channel flags at registration time, used by regulatory
+ * code to support devices with additional restrictions
+ * @band: band this channel belongs to.
+ * @max_antenna_gain: maximum antenna gain in dBi
+ * @max_power: maximum transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ * has been found on this channel. Use regulatory_hint_found_beacon()
+ * to enable this, this is is useful only on 5 GHz band.
+ * @orig_mag: internal use
+ * @orig_mpwr: internal use
*/
+struct ieee80211_channel {
+ enum ieee80211_band band;
+ u16 center_freq;
+ u8 max_bandwidth;
+ u16 hw_value;
+ u32 flags;
+ int max_antenna_gain;
+ int max_power;
+ bool beacon_found;
+ u32 orig_flags;
+ int orig_mag, orig_mpwr;
+};
+
/**
- * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
- * @rtheader: pointer to the radiotap header we are walking through
- * @max_length: length of radiotap header in cpu byte ordering
- * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
- * @this_arg: pointer to current radiotap arg
- * @arg_index: internal next argument index
- * @arg: internal next argument pointer
- * @next_bitmap: internal pointer to next present u32
- * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * enum ieee80211_rate_flags - rate flags
+ *
+ * Hardware/specification flags for rates. These are structured
+ * in a way that allows using the same bitrate structure for
+ * different bands/PHY modes.
+ *
+ * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
+ * preamble on this bitrate; only relevant in 2.4GHz band and
+ * with CCK rates.
+ * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
+ * when used with 802.11a (on the 5 GHz band); filled by the
+ * core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
+ * when used with 802.11b (on the 2.4 GHz band); filled by the
+ * core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
+ * when used with 802.11g (on the 2.4 GHz band); filled by the
+ * core code when registering the wiphy.
+ * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
*/
+enum ieee80211_rate_flags {
+ IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
+ IEEE80211_RATE_MANDATORY_A = 1<<1,
+ IEEE80211_RATE_MANDATORY_B = 1<<2,
+ IEEE80211_RATE_MANDATORY_G = 1<<3,
+ IEEE80211_RATE_ERP_G = 1<<4,
+};
-struct ieee80211_radiotap_iterator {
- struct ieee80211_radiotap_header *rtheader;
- int max_length;
- int this_arg_index;
- u8 *this_arg;
+/**
+ * struct ieee80211_rate - bitrate definition
+ *
+ * This structure describes a bitrate that an 802.11 PHY can
+ * operate with. The two values @hw_value and @hw_value_short
+ * are only for driver use when pointers to this structure are
+ * passed around.
+ *
+ * @flags: rate-specific flags
+ * @bitrate: bitrate in units of 100 Kbps
+ * @hw_value: driver/hardware value for this rate
+ * @hw_value_short: driver/hardware value for this rate when
+ * short preamble is used
+ */
+struct ieee80211_rate {
+ u32 flags;
+ u16 bitrate;
+ u16 hw_value, hw_value_short;
+};
- int arg_index;
- u8 *arg;
- __le32 *next_bitmap;
- u32 bitmap_shifter;
+/**
+ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+ * @mcs: Supported MCS rates
+ */
+struct ieee80211_sta_ht_cap {
+ u16 cap; /* use IEEE80211_HT_CAP_ */
+ bool ht_supported;
+ u8 ampdu_factor;
+ u8 ampdu_density;
+ struct ieee80211_mcs_info mcs;
};
-extern int ieee80211_radiotap_iterator_init(
- struct ieee80211_radiotap_iterator *iterator,
- struct ieee80211_radiotap_header *radiotap_header,
- int max_length);
+/**
+ * struct ieee80211_supported_band - frequency band definition
+ *
+ * This structure describes a frequency band a wiphy
+ * is able to operate in.
+ *
+ * @channels: Array of channels the hardware can operate in
+ * in this band.
+ * @band: the band this structure represents
+ * @n_channels: Number of channels in @channels
+ * @bitrates: Array of bitrates the hardware can operate with
+ * in this band. Must be sorted to give a valid "supported
+ * rates" IE, i.e. CCK rates first, then OFDM.
+ * @n_bitrates: Number of bitrates in @bitrates
+ */
+struct ieee80211_supported_band {
+ struct ieee80211_channel *channels;
+ struct ieee80211_rate *bitrates;
+ enum ieee80211_band band;
+ int n_channels;
+ int n_bitrates;
+ struct ieee80211_sta_ht_cap ht_cap;
+};
-extern int ieee80211_radiotap_iterator_next(
- struct ieee80211_radiotap_iterator *iterator);
+/*
+ * Wireless hardware/device configuration structures and methods
+ */
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @mesh_id: mesh ID to use
+ * @mesh_id_len: length of the mesh ID
+ */
+struct vif_params {
+ u8 *mesh_id;
+ int mesh_id_len;
+};
- /**
+/**
* struct key_params - key information
*
* Information about a key
@@ -106,27 +255,6 @@ struct beacon_parameters {
};
/**
- * enum station_flags - station flags
- *
- * Station capability flags. Note that these must be the bits
- * according to the nl80211 flags.
- *
- * @STATION_FLAG_CHANGED: station flags were changed
- * @STATION_FLAG_AUTHORIZED: station is authorized to send frames (802.1X)
- * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- * with short preambles
- * @STATION_FLAG_WME: station is WME/QoS capable
- * @STATION_FLAG_MFP: station uses management frame protection
- */
-enum station_flags {
- STATION_FLAG_CHANGED = 1<<0,
- STATION_FLAG_AUTHORIZED = 1<<NL80211_STA_FLAG_AUTHORIZED,
- STATION_FLAG_SHORT_PREAMBLE = 1<<NL80211_STA_FLAG_SHORT_PREAMBLE,
- STATION_FLAG_WME = 1<<NL80211_STA_FLAG_WME,
- STATION_FLAG_MFP = 1<<NL80211_STA_FLAG_MFP,
-};
-
-/**
* enum plink_action - actions to perform in mesh peers
*
* @PLINK_ACTION_INVALID: action 0 is reserved
@@ -148,14 +276,17 @@ enum plink_actions {
* @supported_rates: supported rates in IEEE 802.11 format
* (or NULL for no change)
* @supported_rates_len: number of supported rates
- * @station_flags: station flags (see &enum station_flags)
+ * @sta_flags_mask: station flags that changed
+ * (bitmask of BIT(NL80211_STA_FLAG_...))
+ * @sta_flags_set: station flags values
+ * (bitmask of BIT(NL80211_STA_FLAG_...))
* @listen_interval: listen interval or -1 for no change
* @aid: AID or zero for no change
*/
struct station_parameters {
u8 *supported_rates;
struct net_device *vlan;
- u32 station_flags;
+ u32 sta_flags_mask, sta_flags_set;
int listen_interval;
u16 aid;
u8 supported_rates_len;
@@ -348,92 +479,6 @@ struct bss_parameters {
u8 basic_rates_len;
};
-/**
- * enum environment_cap - Environment parsed from country IE
- * @ENVIRON_ANY: indicates country IE applies to both indoor and
- * outdoor operation.
- * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
- * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
- */
-enum environment_cap {
- ENVIRON_ANY,
- ENVIRON_INDOOR,
- ENVIRON_OUTDOOR,
-};
-
-/**
- * struct regulatory_request - used to keep track of regulatory requests
- *
- * @wiphy_idx: this is set if this request's initiator is
- * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
- * can be used by the wireless core to deal with conflicts
- * and potentially inform users of which devices specifically
- * cased the conflicts.
- * @initiator: indicates who sent this request, could be any of
- * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
- * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
- * regulatory domain. We have a few special codes:
- * 00 - World regulatory domain
- * 99 - built by driver but a specific alpha2 cannot be determined
- * 98 - result of an intersection between two regulatory domains
- * @intersect: indicates whether the wireless core should intersect
- * the requested regulatory domain with the presently set regulatory
- * domain.
- * @country_ie_checksum: checksum of the last processed and accepted
- * country IE
- * @country_ie_env: lets us know if the AP is telling us we are outdoor,
- * indoor, or if it doesn't matter
- * @list: used to insert into the reg_requests_list linked list
- */
-struct regulatory_request {
- int wiphy_idx;
- enum nl80211_reg_initiator initiator;
- char alpha2[2];
- bool intersect;
- u32 country_ie_checksum;
- enum environment_cap country_ie_env;
- struct list_head list;
-};
-
-struct ieee80211_freq_range {
- u32 start_freq_khz;
- u32 end_freq_khz;
- u32 max_bandwidth_khz;
-};
-
-struct ieee80211_power_rule {
- u32 max_antenna_gain;
- u32 max_eirp;
-};
-
-struct ieee80211_reg_rule {
- struct ieee80211_freq_range freq_range;
- struct ieee80211_power_rule power_rule;
- u32 flags;
-};
-
-struct ieee80211_regdomain {
- u32 n_reg_rules;
- char alpha2[2];
- struct ieee80211_reg_rule reg_rules[];
-};
-
-#define MHZ_TO_KHZ(freq) ((freq) * 1000)
-#define KHZ_TO_MHZ(freq) ((freq) / 1000)
-#define DBI_TO_MBI(gain) ((gain) * 100)
-#define MBI_TO_DBI(gain) ((gain) / 100)
-#define DBM_TO_MBM(gain) ((gain) * 100)
-#define MBM_TO_DBM(gain) ((gain) / 100)
-
-#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
- .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
- .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
- .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
- .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \
- .power_rule.max_eirp = DBM_TO_MBM(eirp), \
- .flags = reg_flags, \
- }
-
struct mesh_config {
/* Timeouts in ms */
/* Mesh plink management parameters */
@@ -504,7 +549,7 @@ struct cfg80211_scan_request {
int n_ssids;
struct ieee80211_channel **channels;
u32 n_channels;
- u8 *ie;
+ const u8 *ie;
size_t ie_len;
/* internal */
@@ -612,6 +657,11 @@ struct cfg80211_auth_request {
* @ssid_len: Length of ssid in octets
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
* @ie_len: Length of ie buffer in octets
+ * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ * required to assume that the port is unauthorized until authorized by
+ * user space. Otherwise, port is marked authorized by default.
*/
struct cfg80211_assoc_request {
struct ieee80211_channel *chan;
@@ -620,6 +670,8 @@ struct cfg80211_assoc_request {
size_t ssid_len;
const u8 *ie;
size_t ie_len;
+ bool use_mfp;
+ bool control_port;
};
/**
@@ -659,6 +711,47 @@ struct cfg80211_disassoc_request {
};
/**
+ * struct cfg80211_ibss_params - IBSS parameters
+ *
+ * This structure defines the IBSS parameters for the join_ibss()
+ * method.
+ *
+ * @ssid: The SSID, will always be non-null.
+ * @ssid_len: The length of the SSID, will always be non-zero.
+ * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
+ * search for IBSSs with a different BSSID.
+ * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_fixed: The channel should be fixed -- do not search for
+ * IBSSs to join on other channels.
+ * @ie: information element(s) to include in the beacon
+ * @ie_len: length of that
+ * @beacon_interval: beacon interval to use
+ */
+struct cfg80211_ibss_params {
+ u8 *ssid;
+ u8 *bssid;
+ struct ieee80211_channel *channel;
+ u8 *ie;
+ u8 ssid_len, ie_len;
+ u16 beacon_interval;
+ bool channel_fixed;
+};
+
+/**
+ * enum wiphy_params_flags - set_wiphy_params bitfield values
+ * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
+ * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
+ * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
+ * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
+ */
+enum wiphy_params_flags {
+ WIPHY_PARAM_RETRY_SHORT = 1 << 0,
+ WIPHY_PARAM_RETRY_LONG = 1 << 1,
+ WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2,
+ WIPHY_PARAM_RTS_THRESHOLD = 1 << 3,
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -688,10 +781,11 @@ struct cfg80211_disassoc_request {
* @get_key: get information about the key with the given parameters.
* @mac_addr will be %NULL when requesting information for a group
* key. All pointers given to the @callback function need not be valid
- * after it returns.
+ * after it returns. This function should return an error if it is
+ * not possible to retrieve the key, -ENOENT if it doesn't exist.
*
* @del_key: remove a key given the @mac_addr (%NULL for a group key)
- * and @key_index
+ * and @key_index, return -ENOENT if the key doesn't exist.
*
* @set_default_key: set the default key on an interface
*
@@ -733,6 +827,16 @@ struct cfg80211_disassoc_request {
* @assoc: Request to (re)associate with the specified peer
* @deauth: Request to deauthenticate from the specified peer
* @disassoc: Request to disassociate from the specified peer
+ *
+ * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
+ * cfg80211_ibss_joined(), also call that function when changing BSSID due
+ * to a merge.
+ * @leave_ibss: Leave the IBSS.
+ *
+ * @set_wiphy_params: Notify that wiphy parameters have changed;
+ * @changed bitfield (see &enum wiphy_params_flags) describes which values
+ * have changed. The actual parameter values are available in
+ * struct wiphy. If returning an error, no value should be changed.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
@@ -747,13 +851,13 @@ struct cfg80211_ops {
struct vif_params *params);
int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
- u8 key_index, u8 *mac_addr,
+ u8 key_index, const u8 *mac_addr,
struct key_params *params);
int (*get_key)(struct wiphy *wiphy, struct net_device *netdev,
- u8 key_index, u8 *mac_addr, void *cookie,
+ u8 key_index, const u8 *mac_addr, void *cookie,
void (*callback)(void *cookie, struct key_params*));
int (*del_key)(struct wiphy *wiphy, struct net_device *netdev,
- u8 key_index, u8 *mac_addr);
+ u8 key_index, const u8 *mac_addr);
int (*set_default_key)(struct wiphy *wiphy,
struct net_device *netdev,
u8 key_index);
@@ -818,9 +922,467 @@ struct cfg80211_ops {
struct cfg80211_deauth_request *req);
int (*disassoc)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_disassoc_request *req);
+
+ int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params);
+ int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
+
+ int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
+};
+
+/*
+ * wireless hardware and networking interfaces structures
+ * and registration/helper functions
+ */
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
+ * @custom_regulatory: tells us the driver for this device
+ * has its own custom regulatory domain and cannot identify the
+ * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ * we will disregard the first regulatory hint (when the
+ * initiator is %REGDOM_SET_BY_CORE).
+ * @strict_regulatory: tells us the driver for this device will ignore
+ * regulatory domain settings until it gets its own regulatory domain
+ * via its regulatory_hint(). After its gets its own regulatory domain
+ * it will only allow further regulatory domain settings to further
+ * enhance compliance. For example if channel 13 and 14 are disabled
+ * by this regulatory domain no user regulatory domain can enable these
+ * channels at a later time. This can be used for devices which do not
+ * have calibration information gauranteed for frequencies or settings
+ * outside of its regulatory domain.
+ * @reg_notifier: the driver's regulatory notification callback
+ * @regd: the driver's regulatory domain, if one was requested via
+ * the regulatory_hint() API. This can be used by the driver
+ * on the reg_notifier() if it chooses to ignore future
+ * regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
+ * @cipher_suites: supported cipher suites
+ * @n_cipher_suites: number of supported cipher suites
+ * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
+ * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
+ * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
+ * -1 = fragmentation disabled, only odd values >= 256 used
+ * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ */
+struct wiphy {
+ /* assign these fields before you register the wiphy */
+
+ /* permanent MAC address */
+ u8 perm_addr[ETH_ALEN];
+
+ /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+ u16 interface_modes;
+
+ bool custom_regulatory;
+ bool strict_regulatory;
+
+ enum cfg80211_signal_type signal_type;
+
+ int bss_priv_size;
+ u8 max_scan_ssids;
+ u16 max_scan_ie_len;
+
+ int n_cipher_suites;
+ const u32 *cipher_suites;
+
+ u8 retry_short;
+ u8 retry_long;
+ u32 frag_threshold;
+ u32 rts_threshold;
+
+ /* If multiple wiphys are registered and you're handed e.g.
+ * a regular netdev with assigned ieee80211_ptr, you won't
+ * know whether it points to a wiphy your driver has registered
+ * or not. Assign this to something global to your driver to
+ * help determine whether you own this wiphy or not. */
+ const void *privid;
+
+ struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+
+ /* Lets us get back the wiphy on the callback */
+ int (*reg_notifier)(struct wiphy *wiphy,
+ struct regulatory_request *request);
+
+ /* fields below are read-only, assigned by cfg80211 */
+
+ const struct ieee80211_regdomain *regd;
+
+ /* the item in /sys/class/ieee80211/ points to this,
+ * you need use set_wiphy_dev() (see below) */
+ struct device dev;
+
+ /* dir in debugfs: ieee80211/<wiphyname> */
+ struct dentry *debugfsdir;
+
+ char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+/**
+ * wiphy_priv - return priv from wiphy
+ *
+ * @wiphy: the wiphy whose priv pointer to return
+ */
+static inline void *wiphy_priv(struct wiphy *wiphy)
+{
+ BUG_ON(!wiphy);
+ return &wiphy->priv;
+}
+
+/**
+ * set_wiphy_dev - set device pointer for wiphy
+ *
+ * @wiphy: The wiphy whose device to bind
+ * @dev: The device to parent it to
+ */
+static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
+{
+ wiphy->dev.parent = dev;
+}
+
+/**
+ * wiphy_dev - get wiphy dev pointer
+ *
+ * @wiphy: The wiphy whose device struct to look up
+ */
+static inline struct device *wiphy_dev(struct wiphy *wiphy)
+{
+ return wiphy->dev.parent;
+}
+
+/**
+ * wiphy_name - get wiphy name
+ *
+ * @wiphy: The wiphy whose name to return
+ */
+static inline const char *wiphy_name(struct wiphy *wiphy)
+{
+ return dev_name(&wiphy->dev);
+}
+
+/**
+ * wiphy_new - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * The returned pointer must be assigned to each netdev's
+ * ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+
+/**
+ * wiphy_register - register a wiphy with cfg80211
+ *
+ * @wiphy: The wiphy to register.
+ *
+ * Returns a non-negative wiphy index or a negative error code.
+ */
+extern int wiphy_register(struct wiphy *wiphy);
+
+/**
+ * wiphy_unregister - deregister a wiphy from cfg80211
+ *
+ * @wiphy: The wiphy to unregister.
+ *
+ * After this call, no more requests can be made with this priv
+ * pointer, but the call may sleep to wait for an outstanding
+ * request that is being handled.
+ */
+extern void wiphy_unregister(struct wiphy *wiphy);
+
+/**
+ * wiphy_free - free wiphy
+ *
+ * @wiphy: The wiphy to free
+ */
+extern void wiphy_free(struct wiphy *wiphy);
+
+/**
+ * struct wireless_dev - wireless per-netdev state
+ *
+ * This structure must be allocated by the driver/stack
+ * that uses the ieee80211_ptr field in struct net_device
+ * (this is intentional so it can be allocated along with
+ * the netdev.)
+ *
+ * @wiphy: pointer to hardware description
+ * @iftype: interface type
+ * @list: (private) Used to collect the interfaces
+ * @netdev: (private) Used to reference back to the netdev
+ * @current_bss: (private) Used by the internal configuration code
+ * @bssid: (private) Used by the internal configuration code
+ * @ssid: (private) Used by the internal configuration code
+ * @ssid_len: (private) Used by the internal configuration code
+ * @wext: (private) Used by the internal wireless extensions compat code
+ * @wext_bssid: (private) Used by the internal wireless extensions compat code
+ */
+struct wireless_dev {
+ struct wiphy *wiphy;
+ enum nl80211_iftype iftype;
+
+ /* private to the generic wireless code */
+ struct list_head list;
+ struct net_device *netdev;
+
+ /* currently used for IBSS - might be rearranged in the future */
+ struct cfg80211_bss *current_bss;
+ u8 bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+
+#ifdef CONFIG_WIRELESS_EXT
+ /* wext data */
+ struct {
+ struct cfg80211_ibss_params ibss;
+ u8 bssid[ETH_ALEN];
+ s8 default_key, default_mgmt_key;
+ } wext;
+#endif
};
-/* temporary wext handlers */
+/**
+ * wdev_priv - return wiphy priv from wireless_dev
+ *
+ * @wdev: The wireless device whose wiphy's priv pointer to return
+ */
+static inline void *wdev_priv(struct wireless_dev *wdev)
+{
+ BUG_ON(!wdev);
+ return wiphy_priv(wdev->wiphy);
+}
+
+/*
+ * Utility functions
+ */
+
+/**
+ * ieee80211_channel_to_frequency - convert channel number to frequency
+ */
+extern int ieee80211_channel_to_frequency(int chan);
+
+/**
+ * ieee80211_frequency_to_channel - convert frequency to channel number
+ */
+extern int ieee80211_frequency_to_channel(int freq);
+
+/*
+ * Name indirection necessary because the ieee80211 code also has
+ * a function named "ieee80211_get_channel", so if you include
+ * cfg80211's header file you get cfg80211's version, if you try
+ * to include both header files you'll (rightfully!) get a symbol
+ * clash.
+ */
+extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
+ int freq);
+/**
+ * ieee80211_get_channel - get channel struct from wiphy for specified frequency
+ */
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+ return __ieee80211_get_channel(wiphy, freq);
+}
+
+/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+ u32 basic_rates, int bitrate);
+
+/*
+ * Radiotap parsing functions -- for controlled injection support
+ *
+ * Implemented in net/wireless/radiotap.c
+ * Documentation in Documentation/networking/radiotap-headers.txt
+ */
+
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @rtheader: pointer to the radiotap header we are walking through
+ * @max_length: length of radiotap header in cpu byte ordering
+ * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
+ * @this_arg: pointer to current radiotap arg
+ * @arg_index: internal next argument index
+ * @arg: internal next argument pointer
+ * @next_bitmap: internal pointer to next present u32
+ * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ */
+
+struct ieee80211_radiotap_iterator {
+ struct ieee80211_radiotap_header *rtheader;
+ int max_length;
+ int this_arg_index;
+ u8 *this_arg;
+
+ int arg_index;
+ u8 *arg;
+ __le32 *next_bitmap;
+ u32 bitmap_shifter;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+ struct ieee80211_radiotap_iterator *iterator,
+ struct ieee80211_radiotap_header *radiotap_header,
+ int max_length);
+
+extern int ieee80211_radiotap_iterator_next(
+ struct ieee80211_radiotap_iterator *iterator);
+
+extern const unsigned char rfc1042_header[6];
+extern const unsigned char bridge_tunnel_header[6];
+
+/**
+ * ieee80211_get_hdrlen_from_skb - get header length from data
+ *
+ * Given an skb with a raw 802.11 header at the data pointer this function
+ * returns the 802.11 header length in bytes (not including encryption
+ * headers). If the data in the sk_buff is too short to contain a valid 802.11
+ * header the function returns 0.
+ *
+ * @skb: the frame
+ */
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+
+/**
+ * ieee80211_hdrlen - get header length in bytes from frame control
+ * @fc: frame control field in little-endian format
+ */
+unsigned int ieee80211_hdrlen(__le16 fc);
+
+/**
+ * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
+ * @skb: the 802.11 data frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ */
+int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr,
+ enum nl80211_iftype iftype);
+
+/**
+ * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
+ * @skb: the 802.3 frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ * @bssid: the network bssid (used only for iftype STATION and ADHOC)
+ * @qos: build 802.11 QoS data frame
+ */
+int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr,
+ enum nl80211_iftype iftype, u8 *bssid, bool qos);
+
+/**
+ * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
+ * @skb: the data frame
+ */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb);
+
+/*
+ * Regulatory helper functions for wiphys
+ */
+
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ * conflicts)
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ * should be in. If @rd is set this should be NULL. Note that if you
+ * set this to NULL you should still set rd->alpha2 to some accepted
+ * alpha2.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
+ */
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+
+/**
+ * regulatory_hint_11d - hints a country IE as a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ * conflicts)
+ * @country_ie: pointer to the country IE
+ * @country_ie_len: length of the country IE
+ *
+ * We will intersect the rd with the what CRDA tells us should apply
+ * for the alpha2 this country IE belongs to, this prevents APs from
+ * sending us incorrect or outdated information against a country.
+ */
+extern void regulatory_hint_11d(struct wiphy *wiphy,
+ u8 *country_ie,
+ u8 country_ie_len);
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+ struct wiphy *wiphy,
+ const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @desired_bw_khz: the desired max bandwidth you want to use per
+ * channel. Note that this is still 20 MHz if you want to use HT40
+ * as HT40 makes use of two channels for its 40 MHz width bandwidth.
+ * If set to 0 we'll assume you want the standard 20 MHz.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy,
+ u32 center_freq,
+ u32 desired_bw_khz,
+ const struct ieee80211_reg_rule **reg_rule);
+
+/*
+ * Temporary wext handlers & helper functions
+ *
+ * In the future cfg80211 will simply assign the entire wext handler
+ * structure to netdevs it manages, but we're not there yet.
+ */
int cfg80211_wext_giwname(struct net_device *dev,
struct iw_request_info *info,
char *name, char *extra);
@@ -834,9 +1396,66 @@ int cfg80211_wext_siwscan(struct net_device *dev,
int cfg80211_wext_giwscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra);
+int cfg80211_wext_siwmlme(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra);
int cfg80211_wext_giwrange(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra);
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+
+struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
+ struct iw_freq *freq);
+
+int cfg80211_wext_siwrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rts, char *extra);
+int cfg80211_wext_giwrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rts, char *extra);
+int cfg80211_wext_siwfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frag, char *extra);
+int cfg80211_wext_giwfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frag, char *extra);
+int cfg80211_wext_siwretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *retry, char *extra);
+int cfg80211_wext_giwretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *retry, char *extra);
+int cfg80211_wext_siwencodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq, char *extra);
+int cfg80211_wext_siwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq, char *keybuf);
+int cfg80211_wext_giwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq, char *keybuf);
+
+/*
+ * callbacks for asynchronous cfg80211 methods, notification
+ * functions and BSS handling helpers
+ */
/**
* cfg80211_scan_done - notify that scan finished
@@ -864,6 +1483,14 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
struct ieee80211_mgmt *mgmt, size_t len,
s32 signal, gfp_t gfp);
+struct cfg80211_bss*
+cfg80211_inform_bss(struct wiphy *wiphy,
+ struct ieee80211_channel *channel,
+ const u8 *bssid,
+ u64 timestamp, u16 capability, u16 beacon_interval,
+ const u8 *ie, size_t ielen,
+ s32 signal, gfp_t gfp);
+
struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
struct ieee80211_channel *channel,
const u8 *bssid,
@@ -883,6 +1510,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
const u8 *meshid, size_t meshidlen,
const u8 *meshcfg);
void cfg80211_put_bss(struct cfg80211_bss *bss);
+
/**
* cfg80211_unlink_bss - unlink BSS from internal data structures
* @wiphy: the wiphy
@@ -902,44 +1530,62 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
* @len: length of the frame data
*
* This function is called whenever an authentication has been processed in
- * station mode.
+ * station mode. The driver is required to call either this function or
+ * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
+ * call.
*/
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
/**
+ * cfg80211_send_auth_timeout - notification of timed out authentication
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ */
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+
+/**
* cfg80211_send_rx_assoc - notification of processed association
* @dev: network device
* @buf: (re)association response frame (header + body)
* @len: length of the frame data
*
* This function is called whenever a (re)association response has been
- * processed in station mode.
+ * processed in station mode. The driver is required to call either this
+ * function or cfg80211_send_assoc_timeout() to indicate the result of
+ * cfg80211_ops::assoc() call.
*/
void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_rx_deauth - notification of processed deauthentication
+ * cfg80211_send_assoc_timeout - notification of timed out association
+ * @dev: network device
+ * @addr: The MAC address of the device with which the association timed out
+ */
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_deauth - notification of processed deauthentication
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
*
* This function is called whenever deauthentication has been processed in
- * station mode.
+ * station mode. This includes both received deauthentication frames and
+ * locally generated ones.
*/
-void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_rx_disassoc - notification of processed disassociation
+ * cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
* @buf: disassociation response frame (header + body)
* @len: length of the frame data
*
* This function is called whenever disassociation has been processed in
- * station mode.
+ * station mode. This includes both received disassociation frames and locally
+ * generated ones.
*/
-void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
/**
* cfg80211_hold_bss - exclude bss from expiration
@@ -958,4 +1604,36 @@ void cfg80211_hold_bss(struct cfg80211_bss *bss);
*/
void cfg80211_unhold_bss(struct cfg80211_bss *bss);
+/**
+ * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
+ * @dev: network device
+ * @addr: The source MAC address of the frame
+ * @key_type: The key type that the received frame used
+ * @key_id: Key identifier (0..3)
+ * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ *
+ * This function is called whenever the local MAC detects a MIC failure in a
+ * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
+ * primitive.
+ */
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+ enum nl80211_key_type key_type, int key_id,
+ const u8 *tsc);
+
+/**
+ * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the IBSS joined
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the device joined an IBSS or
+ * switched to a different BSSID. Before this function can be called,
+ * either a beacon has to have been received from the IBSS, or one of
+ * the cfg80211_inform_bss{,_frame} functions must have been called
+ * with the locally generated beacon -- this guarantees that there is
+ * always a scan result for this IBSS. cfg80211 will handle the rest.
+ */
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+
#endif /* __NET_CFG80211_H */
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index c2bb5cae651..ca4b2e84007 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -48,14 +48,12 @@ struct fib_rules_ops
struct flowi *, int);
int (*configure)(struct fib_rule *,
struct sk_buff *,
- struct nlmsghdr *,
struct fib_rule_hdr *,
struct nlattr **);
int (*compare)(struct fib_rule *,
struct fib_rule_hdr *,
struct nlattr **);
int (*fill)(struct fib_rule *, struct sk_buff *,
- struct nlmsghdr *,
struct fib_rule_hdr *);
u32 (*default_pref)(struct fib_rules_ops *ops);
size_t (*nlmsg_payload)(struct fib_rule *);
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 747c255d1df..1b0e3ee4ddd 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -88,6 +88,8 @@ struct genl_ops
};
extern int genl_register_family(struct genl_family *family);
+extern int genl_register_family_with_ops(struct genl_family *family,
+ struct genl_ops *ops, size_t n_ops);
extern int genl_unregister_family(struct genl_family *family);
extern int genl_register_ops(struct genl_family *, struct genl_ops *ops);
extern int genl_unregister_ops(struct genl_family *, struct genl_ops *ops);
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index de0ecc71cf0..20a6957af87 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -130,7 +130,8 @@ struct inet_sock {
freebind:1,
hdrincl:1,
mc_loop:1,
- transparent:1;
+ transparent:1,
+ mc_all:1;
int mc_index;
__be32 mc_addr;
struct ip_mc_socklist *mc_list;
diff --git a/include/net/ip.h b/include/net/ip.h
index 4ac7577f98d..72c36926c26 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -168,7 +168,10 @@ struct ipv4_config
extern struct ipv4_config ipv4_config;
#define IP_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.ip_statistics, field)
#define IP_INC_STATS_BH(net, field) SNMP_INC_STATS_BH((net)->mib.ip_statistics, field)
+#define IP_ADD_STATS(net, field, val) SNMP_ADD_STATS((net)->mib.ip_statistics, field, val)
#define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS_BH((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS(net, field, val) SNMP_UPD_PO_STATS((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS_BH(net, field, val) SNMP_UPD_PO_STATS_BH((net)->mib.ip_statistics, field, val)
#define NET_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.net_statistics, field)
#define NET_INC_STATS_BH(net, field) SNMP_INC_STATS_BH((net)->mib.net_statistics, field)
#define NET_INC_STATS_USER(net, field) SNMP_INC_STATS_USER((net)->mib.net_statistics, field)
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 8b12667f7a2..ef91fe924ba 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -124,14 +124,12 @@ struct fib_result_nl {
#ifdef CONFIG_IP_ROUTE_MULTIPATH
#define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel])
-#define FIB_RES_RESET(res) ((res).nh_sel = 0)
#define FIB_TABLE_HASHSZ 2
#else /* CONFIG_IP_ROUTE_MULTIPATH */
#define FIB_RES_NH(res) ((res).fi->fib_nh[0])
-#define FIB_RES_RESET(res)
#define FIB_TABLE_HASHSZ 256
@@ -145,7 +143,6 @@ struct fib_result_nl {
struct fib_table {
struct hlist_node tb_hlist;
u32 tb_id;
- unsigned tb_stamp;
int tb_default;
int (*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res);
int (*tb_insert)(struct fib_table *, struct fib_config *);
diff --git a/include/net/ipip.h b/include/net/ipip.h
index fdf9bd74370..5d3036fa151 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -28,11 +28,18 @@ struct ip_tunnel
unsigned int prl_count; /* # of entries in PRL */
};
+/* ISATAP: default interval between RS in secondy */
+#define IPTUNNEL_RS_DEFAULT_DELAY (900)
+
struct ip_tunnel_prl_entry
{
struct ip_tunnel_prl_entry *next;
__be32 addr;
u16 flags;
+ unsigned long rs_delay;
+ struct timer_list rs_timer;
+ struct ip_tunnel *tunnel;
+ spinlock_t lock;
};
#define IPTUNNEL_XMIT() do { \
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index c1f16fc49ad..f27fd83d67d 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -126,15 +126,28 @@ extern struct ctl_path net_ipv6_ctl_path[];
SNMP_ADD_STATS##modifier((net)->mib.statname##_statistics, (field), (val));\
})
+#define _DEVUPD(net, statname, modifier, idev, field, val) \
+({ \
+ struct inet6_dev *_idev = (idev); \
+ if (likely(_idev != NULL)) \
+ SNMP_UPD_PO_STATS##modifier((_idev)->stats.statname, field, (val)); \
+ SNMP_UPD_PO_STATS##modifier((net)->mib.statname##_statistics, field, (val));\
+})
+
/* MIBs */
#define IP6_INC_STATS(net, idev,field) \
_DEVINC(net, ipv6, , idev, field)
#define IP6_INC_STATS_BH(net, idev,field) \
_DEVINC(net, ipv6, _BH, idev, field)
+#define IP6_ADD_STATS(net, idev,field,val) \
+ _DEVADD(net, ipv6, , idev, field, val)
#define IP6_ADD_STATS_BH(net, idev,field,val) \
_DEVADD(net, ipv6, _BH, idev, field, val)
-
+#define IP6_UPD_PO_STATS(net, idev,field,val) \
+ _DEVUPD(net, ipv6, , idev, field, val)
+#define IP6_UPD_PO_STATS_BH(net, idev,field,val) \
+ _DEVUPD(net, ipv6, _BH, idev, field, val)
#define ICMP6_INC_STATS(net, idev, field) \
_DEVINC(net, icmpv6, , idev, field)
#define ICMP6_INC_STATS_BH(net, idev, field) \
diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
index 85f80eadfa3..21ee49ffcba 100644
--- a/include/net/iucv/af_iucv.h
+++ b/include/net/iucv/af_iucv.h
@@ -73,8 +73,17 @@ struct iucv_sock {
struct sk_buff_head backlog_skb_q;
struct sock_msg_q message_q;
unsigned int send_tag;
+ u8 flags;
+ u16 msglimit;
};
+/* iucv socket options (SOL_IUCV) */
+#define SO_IPRMDATA_MSG 0x0080 /* send/recv IPRM_DATA msgs */
+#define SO_MSGLIMIT 0x1000 /* get/set IUCV MSGLIMIT */
+
+/* iucv related control messages (scm) */
+#define SCM_IUCV_TRGCLS 0x0001 /* target class control message */
+
struct iucv_sock_list {
struct hlist_head head;
rwlock_t lock;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3b83a80e3fe..d72346ff324 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -19,7 +19,6 @@
#include <linux/wireless.h>
#include <linux/device.h>
#include <linux/ieee80211.h>
-#include <net/wireless.h>
#include <net/cfg80211.h>
/**
@@ -74,22 +73,6 @@
*/
/**
- * struct ieee80211_ht_bss_info - describing BSS's HT characteristics
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT characteristics in a BSS.
- *
- * @primary_channel: channel number of primery channel
- * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width)
- * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection)
- */
-struct ieee80211_ht_bss_info {
- u8 primary_channel;
- u8 bss_cap; /* use IEEE80211_HT_IE_CHA_ */
- u8 bss_op_mode; /* use IEEE80211_HT_IE_ */
-};
-
-/**
* enum ieee80211_max_queues - maximum number of queues
*
* @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
@@ -150,6 +133,13 @@ struct ieee80211_low_level_stats {
* @BSS_CHANGED_ERP_SLOT: slot timing changed
* @BSS_CHANGED_HT: 802.11n parameters changed
* @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
+ * @BSS_CHANGED_BSSID: BSSID changed, for whatever
+ * reason (IBSS and managed mode)
+ * @BSS_CHANGED_BEACON: Beacon data changed, retrieve
+ * new beacon (beaconing modes)
+ * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
+ * enabled/disabled (beaconing modes)
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -158,14 +148,10 @@ enum ieee80211_bss_change {
BSS_CHANGED_ERP_SLOT = 1<<3,
BSS_CHANGED_HT = 1<<4,
BSS_CHANGED_BASIC_RATES = 1<<5,
-};
-
-/**
- * struct ieee80211_bss_ht_conf - BSS's changing HT configuration
- * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info)
- */
-struct ieee80211_bss_ht_conf {
- u16 operation_mode;
+ BSS_CHANGED_BEACON_INT = 1<<6,
+ BSS_CHANGED_BSSID = 1<<7,
+ BSS_CHANGED_BEACON = 1<<8,
+ BSS_CHANGED_BEACON_ENABLED = 1<<9,
};
/**
@@ -187,12 +173,16 @@ struct ieee80211_bss_ht_conf {
* @timestamp: beacon timestamp
* @beacon_int: beacon interval
* @assoc_capability: capabilities taken from assoc resp
- * @ht: BSS's HT configuration
* @basic_rates: bitmap of basic rates, each bit stands for an
* index into the rate table configured by the driver in
* the current band.
+ * @bssid: The BSSID for this BSS
+ * @enable_beacon: whether beaconing should be enabled or not
+ * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
+ * This field is only valid when the channel type is one of the HT types.
*/
struct ieee80211_bss_conf {
+ const u8 *bssid;
/* association related data */
bool assoc;
u16 aid;
@@ -200,12 +190,13 @@ struct ieee80211_bss_conf {
bool use_cts_prot;
bool use_short_preamble;
bool use_short_slot;
+ bool enable_beacon;
u8 dtim_period;
u16 beacon_int;
u16 assoc_capability;
u64 timestamp;
u32 basic_rates;
- struct ieee80211_bss_ht_conf ht;
+ u16 ht_operation_mode;
};
/**
@@ -518,11 +509,17 @@ struct ieee80211_rx_status {
* Flags to define PHY configuration options
*
* @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
- * @IEEE80211_CONF_PS: Enable 802.11 power save mode
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
+ * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ * the driver should be prepared to handle configuration requests but
+ * may turn the device off as much as possible. Typically, this flag will
+ * be set when an interface is set UP but not associated or scanning, but
+ * it can also be unset in that case when monitor interfaces are active.
*/
enum ieee80211_conf_flags {
IEEE80211_CONF_RADIOTAP = (1<<0),
IEEE80211_CONF_PS = (1<<1),
+ IEEE80211_CONF_IDLE = (1<<2),
};
@@ -530,40 +527,60 @@ enum ieee80211_conf_flags {
* enum ieee80211_conf_changed - denotes which configuration changed
*
* @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
- * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
+ * @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
- * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
- * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
- IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
+ _IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
- IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5),
- IEEE80211_CONF_CHANGE_POWER = BIT(6),
- IEEE80211_CONF_CHANGE_CHANNEL = BIT(7),
- IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8),
+ IEEE80211_CONF_CHANGE_POWER = BIT(5),
+ IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
+ IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
+ IEEE80211_CONF_CHANGE_IDLE = BIT(8),
};
+static inline __deprecated enum ieee80211_conf_changed
+__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void)
+{
+ return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL;
+}
+#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \
+ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL()
+
/**
* struct ieee80211_conf - configuration of the device
*
* This struct indicates how the driver shall configure the hardware.
*
+ * @flags: configuration flags defined above
+ *
* @radio_enabled: when zero, driver is required to switch off the radio.
* @beacon_int: beacon interval (TODO make interface config)
+ *
* @listen_interval: listen interval in units of beacon interval
- * @flags: configuration flags defined above
+ * @max_sleep_period: the maximum number of beacon intervals to sleep for
+ * before checking the beacon for a TIM bit (managed mode only); this
+ * value will be only achievable between DTIM frames, the hardware
+ * needs to check for the multicast traffic bit in DTIM beacons.
+ * This variable is valid only when the CONF_PS flag is set.
+ * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
+ * powersave documentation below. This variable is valid only when
+ * the CONF_PS flag is set.
+ *
* @power_level: requested transmit power (in dBm)
- * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
+ *
* @channel: the channel to tune to
* @channel_type: the channel (HT) type
+ *
* @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
* (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
* but actually means the number of transmissions not the number of retries
@@ -575,6 +592,7 @@ struct ieee80211_conf {
int beacon_int;
u32 flags;
int power_level, dynamic_ps_timeout;
+ int max_sleep_period;
u16 listen_interval;
bool radio_enabled;
@@ -640,37 +658,6 @@ struct ieee80211_if_init_conf {
};
/**
- * enum ieee80211_if_conf_change - interface config change flags
- *
- * @IEEE80211_IFCC_BSSID: The BSSID changed.
- * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
- * (currently AP and MESH only), use ieee80211_beacon_get().
- * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
- */
-enum ieee80211_if_conf_change {
- IEEE80211_IFCC_BSSID = BIT(0),
- IEEE80211_IFCC_BEACON = BIT(1),
- IEEE80211_IFCC_BEACON_ENABLED = BIT(2),
-};
-
-/**
- * struct ieee80211_if_conf - configuration of an interface
- *
- * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
- * @bssid: BSSID of the network we are associated to/creating.
- * @enable_beacon: Indicates whether beacons can be sent.
- * This is valid only for AP/IBSS/MESH modes.
- *
- * This structure is passed to the config_interface() callback of
- * &struct ieee80211_hw.
- */
-struct ieee80211_if_conf {
- u32 changed;
- const u8 *bssid;
- bool enable_beacon;
-};
-
-/**
* enum ieee80211_key_alg - key algorithm
* @ALG_WEP: WEP40 or WEP104
* @ALG_TKIP: TKIP
@@ -685,16 +672,6 @@ enum ieee80211_key_alg {
};
/**
- * enum ieee80211_key_len - key length
- * @LEN_WEP40: WEP 5-byte long key
- * @LEN_WEP104: WEP 13-byte long key
- */
-enum ieee80211_key_len {
- LEN_WEP40 = 5,
- LEN_WEP104 = 13,
-};
-
-/**
* enum ieee80211_key_flags - key flags
*
* These flags are used for communication about keys between the driver
@@ -1109,11 +1086,9 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* need software support for parsing the TIM bitmap. This is also supported
* by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
* %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
- * required to pass up beacons. Additionally, in this case, mac80211 will
- * wake up the hardware when multicast traffic is announced in the beacon.
- *
- * FIXME: I don't think we can be fast enough in software when we want to
- * receive multicast traffic?
+ * required to pass up beacons. The hardware is still required to handle
+ * waking up for multicast traffic; if it cannot the driver must handle that
+ * as best as it can, mac80211 is too slow.
*
* Dynamic powersave mode is an extension to normal powersave mode in which
* the hardware stays awake for a user-specified period of time after sending
@@ -1134,11 +1109,53 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* way the host will only receive beacons where some relevant information
* (for example ERP protection or WMM settings) have changed.
*
- * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag.
- * The driver needs to enable beacon filter support whenever power save is
- * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled,
- * the stack will not check for beacon miss at all and the driver needs to
- * notify about complete loss of beacons with ieee80211_beacon_loss().
+ * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER
+ * hardware capability. The driver needs to enable beacon filter support
+ * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * power save is enabled, the stack will not check for beacon loss and the
+ * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ *
+ * The time (or number of beacons missed) until the firmware notifies the
+ * driver of a beacon loss event (which in turn causes the driver to call
+ * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * by mac80211 and the roaming algorithm in the future.
+ *
+ * Since there may be constantly changing information elements that nothing
+ * in the software stack cares about, we will, in the future, have mac80211
+ * tell the driver which information elements are interesting in the sense
+ * that we want to see changes in them. This will include
+ * - a list of information element IDs
+ * - a list of OUIs for the vendor information element
+ *
+ * Ideally, the hardware would filter out any beacons without changes in the
+ * requested elements, but if it cannot support that it may, at the expense
+ * of some efficiency, filter out only a subset. For example, if the device
+ * doesn't support checking for OUIs it should pass up all changes in all
+ * vendor information elements.
+ *
+ * Note that change, for the sake of simplification, also includes information
+ * elements appearing or disappearing from the beacon.
+ *
+ * Some hardware supports an "ignore list" instead, just make sure nothing
+ * that was requested is on the ignore list, and include commonly changing
+ * information element IDs in the ignore list, for example 11 (BSS load) and
+ * the various vendor-assigned IEs with unknown contents (128, 129, 133-136,
+ * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility
+ * it could also include some currently unused IDs.
+ *
+ *
+ * In addition to these capabilities, hardware should support notifying the
+ * host of changes in the beacon RSSI. This is relevant to implement roaming
+ * when no traffic is flowing (when traffic is flowing we see the RSSI of
+ * the received data packets). This can consist in notifying the host when
+ * the RSSI changes significantly or when it drops below or rises above
+ * configurable thresholds. In the future these thresholds will also be
+ * configured by mac80211 (which gets them from userspace) to implement
+ * them as the roaming algorithm requires.
+ *
+ * If the hardware cannot implement this, the driver should ask it to
+ * periodically pass beacon frames to the host so that software can do the
+ * signal strength threshold checking.
*/
/**
@@ -1298,10 +1315,6 @@ enum ieee80211_ampdu_mlme_action {
* This function should never fail but returns a negative error code
* if it does.
*
- * @config_interface: Handler for configuration requests related to interfaces
- * (e.g. BSSID changes.)
- * Returns a negative error code which will be seen in userspace.
- *
* @bss_info_changed: Handler for configuration requests related to BSS
* parameters that may vary during BSS's lifespan, and may affect low
* level driver (e.g. assoc/disassoc status, erp parameters).
@@ -1330,11 +1343,14 @@ enum ieee80211_ampdu_mlme_action {
* the scan state machine in stack. The scan must honour the channel
* configuration done by the regulatory agent in the wiphy's
* registered bands. The hardware (or the driver) needs to make sure
- * that power save is disabled. When the scan finishes,
- * ieee80211_scan_completed() must be called; note that it also must
- * be called when the scan cannot finish because the hardware is
- * turned off! Anything else is a bug! Returns a negative error code
- * which will be seen in userspace.
+ * that power save is disabled.
+ * The @req ie/ie_len members are rewritten by mac80211 to contain the
+ * entire IEs after the SSID, so that drivers need not look at these
+ * at all but just send them after the SSID -- mac80211 includes the
+ * (extended) supported rates and HT information (where applicable).
+ * When the scan finishes, ieee80211_scan_completed() must be called;
+ * note that it also must be called when the scan cannot finish due to
+ * any error unless this callback returned a negative error code.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
@@ -1400,9 +1416,6 @@ struct ieee80211_ops {
void (*remove_interface)(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
int (*config)(struct ieee80211_hw *hw, u32 changed);
- int (*config_interface)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf);
void (*bss_info_changed)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
@@ -1572,6 +1585,20 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw);
*/
void ieee80211_free_hw(struct ieee80211_hw *hw);
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
/* trick to avoid symbol clashes with the ieee80211 subsystem */
void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_rx_status *status);
@@ -1775,24 +1802,6 @@ struct sk_buff *
ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
/**
- * ieee80211_get_hdrlen_from_skb - get header length from data
- *
- * Given an skb with a raw 802.11 header at the data pointer this function
- * returns the 802.11 header length in bytes (not including encryption
- * headers). If the data in the sk_buff is too short to contain a valid 802.11
- * header the function returns 0.
- *
- * @skb: the frame
- */
-unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
-
-/**
- * ieee80211_hdrlen - get header length in bytes from frame control
- * @fc: frame control field in little-endian format
- */
-unsigned int ieee80211_hdrlen(__le16 fc);
-
-/**
* ieee80211_get_tkip_key - get a TKIP rc4 for skb
*
* This function computes a TKIP rc4 key for an skb. It computes
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
new file mode 100644
index 00000000000..47995b81c5d
--- /dev/null
+++ b/include/net/regulatory.h
@@ -0,0 +1,101 @@
+#ifndef __NET_REGULATORY_H
+#define __NET_REGULATORY_H
+/*
+ * regulatory support structures
+ *
+ * Copyright 2008-2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ * outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+ ENVIRON_ANY,
+ ENVIRON_INDOOR,
+ ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * can be used by the wireless core to deal with conflicts
+ * and potentially inform users of which devices specifically
+ * cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * regulatory domain. We have a few special codes:
+ * 00 - World regulatory domain
+ * 99 - built by driver but a specific alpha2 cannot be determined
+ * 98 - result of an intersection between two regulatory domains
+ * @intersect: indicates whether the wireless core should intersect
+ * the requested regulatory domain with the presently set regulatory
+ * domain.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+ int wiphy_idx;
+ enum nl80211_reg_initiator initiator;
+ char alpha2[2];
+ bool intersect;
+ u32 country_ie_checksum;
+ enum environment_cap country_ie_env;
+ struct list_head list;
+};
+
+struct ieee80211_freq_range {
+ u32 start_freq_khz;
+ u32 end_freq_khz;
+ u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+ u32 max_antenna_gain;
+ u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+ struct ieee80211_freq_range freq_range;
+ struct ieee80211_power_rule power_rule;
+ u32 flags;
+};
+
+struct ieee80211_regdomain {
+ u32 n_reg_rules;
+ char alpha2[2];
+ struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+{ \
+ .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
+ .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
+ .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
+ .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
+ .power_rule.max_eirp = DBM_TO_MBM(eirp), \
+ .flags = reg_flags, \
+}
+
+#endif
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 57c93628695..8c842e06bec 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -153,6 +153,11 @@ struct linux_xfrm_mib {
per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field]--; \
put_cpu(); \
} while (0)
+#define SNMP_ADD_STATS(mib, field, addend) \
+ do { \
+ per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field] += addend; \
+ put_cpu(); \
+ } while (0)
#define SNMP_ADD_STATS_BH(mib, field, addend) \
(per_cpu_ptr(mib[0], raw_smp_processor_id())->mibs[field] += addend)
#define SNMP_ADD_STATS_USER(mib, field, addend) \
@@ -160,5 +165,17 @@ struct linux_xfrm_mib {
per_cpu_ptr(mib[1], get_cpu())->mibs[field] += addend; \
put_cpu(); \
} while (0)
-
+#define SNMP_UPD_PO_STATS(mib, basefield, addend) \
+ do { \
+ __typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], get_cpu());\
+ ptr->mibs[basefield##PKTS]++; \
+ ptr->mibs[basefield##OCTETS] += addend;\
+ put_cpu(); \
+ } while (0)
+#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend) \
+ do { \
+ __typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], raw_smp_processor_id());\
+ ptr->mibs[basefield##PKTS]++; \
+ ptr->mibs[basefield##OCTETS] += addend;\
+ } while (0)
#endif
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 646dbe3962e..19f4150f4d4 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -266,6 +266,19 @@ static inline int tcp_too_many_orphans(struct sock *sk, int num)
atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2]);
}
+/* syncookies: remember time of last synqueue overflow */
+static inline void tcp_synq_overflow(struct sock *sk)
+{
+ tcp_sk(sk)->rx_opt.ts_recent_stamp = jiffies;
+}
+
+/* syncookies: no recent synqueue overflow on this listening socket? */
+static inline int tcp_synq_no_recent_overflow(const struct sock *sk)
+{
+ unsigned long last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
+ return time_after(jiffies, last_overflow + TCP_TIMEOUT_INIT);
+}
+
extern struct proto tcp_prot;
#define TCP_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.tcp_statistics, field)
@@ -889,30 +902,32 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
- if (!sysctl_tcp_low_latency && tp->ucopy.task) {
- __skb_queue_tail(&tp->ucopy.prequeue, skb);
- tp->ucopy.memory += skb->truesize;
- if (tp->ucopy.memory > sk->sk_rcvbuf) {
- struct sk_buff *skb1;
-
- BUG_ON(sock_owned_by_user(sk));
-
- while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
- sk_backlog_rcv(sk, skb1);
- NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPPREQUEUEDROPPED);
- }
-
- tp->ucopy.memory = 0;
- } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
- wake_up_interruptible(sk->sk_sleep);
- if (!inet_csk_ack_scheduled(sk))
- inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
- (3 * tcp_rto_min(sk)) / 4,
- TCP_RTO_MAX);
+ if (sysctl_tcp_low_latency || !tp->ucopy.task)
+ return 0;
+
+ __skb_queue_tail(&tp->ucopy.prequeue, skb);
+ tp->ucopy.memory += skb->truesize;
+ if (tp->ucopy.memory > sk->sk_rcvbuf) {
+ struct sk_buff *skb1;
+
+ BUG_ON(sock_owned_by_user(sk));
+
+ while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
+ sk_backlog_rcv(sk, skb1);
+ NET_INC_STATS_BH(sock_net(sk),
+ LINUX_MIB_TCPPREQUEUEDROPPED);
}
- return 1;
+
+ tp->ucopy.memory = 0;
+ } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
+ wake_up_interruptible_poll(sk->sk_sleep,
+ POLLIN | POLLRDNORM | POLLRDBAND);
+ if (!inet_csk_ack_scheduled(sk))
+ inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
+ (3 * tcp_rto_min(sk)) / 4,
+ TCP_RTO_MAX);
}
- return 0;
+ return 1;
}
diff --git a/include/net/wireless.h b/include/net/wireless.h
deleted file mode 100644
index 64a76208580..00000000000
--- a/include/net/wireless.h
+++ /dev/null
@@ -1,472 +0,0 @@
-#ifndef __NET_WIRELESS_H
-#define __NET_WIRELESS_H
-
-/*
- * 802.11 device management
- *
- * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
- */
-
-#include <linux/netdevice.h>
-#include <linux/debugfs.h>
-#include <linux/list.h>
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-
-/**
- * enum ieee80211_band - supported frequency bands
- *
- * The bands are assigned this way because the supported
- * bitrates differ in these bands.
- *
- * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
- * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
- */
-enum ieee80211_band {
- IEEE80211_BAND_2GHZ,
- IEEE80211_BAND_5GHZ,
-
- /* keep last */
- IEEE80211_NUM_BANDS
-};
-
-/**
- * enum ieee80211_channel_flags - channel flags
- *
- * Channel flags set by the regulatory control code.
- *
- * @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- * on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
- * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
- * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel
- * is not permitted.
- * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel
- * is not permitted.
- */
-enum ieee80211_channel_flags {
- IEEE80211_CHAN_DISABLED = 1<<0,
- IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
- IEEE80211_CHAN_NO_IBSS = 1<<2,
- IEEE80211_CHAN_RADAR = 1<<3,
- IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4,
- IEEE80211_CHAN_NO_FAT_BELOW = 1<<5,
-};
-
-/**
- * struct ieee80211_channel - channel definition
- *
- * This structure describes a single channel for use
- * with cfg80211.
- *
- * @center_freq: center frequency in MHz
- * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
- * @hw_value: hardware-specific value for the channel
- * @flags: channel flags from &enum ieee80211_channel_flags.
- * @orig_flags: channel flags at registration time, used by regulatory
- * code to support devices with additional restrictions
- * @band: band this channel belongs to.
- * @max_antenna_gain: maximum antenna gain in dBi
- * @max_power: maximum transmission power (in dBm)
- * @beacon_found: helper to regulatory code to indicate when a beacon
- * has been found on this channel. Use regulatory_hint_found_beacon()
- * to enable this, this is is useful only on 5 GHz band.
- * @orig_mag: internal use
- * @orig_mpwr: internal use
- */
-struct ieee80211_channel {
- enum ieee80211_band band;
- u16 center_freq;
- u8 max_bandwidth;
- u16 hw_value;
- u32 flags;
- int max_antenna_gain;
- int max_power;
- bool beacon_found;
- u32 orig_flags;
- int orig_mag, orig_mpwr;
-};
-
-/**
- * enum ieee80211_rate_flags - rate flags
- *
- * Hardware/specification flags for rates. These are structured
- * in a way that allows using the same bitrate structure for
- * different bands/PHY modes.
- *
- * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
- * preamble on this bitrate; only relevant in 2.4GHz band and
- * with CCK rates.
- * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
- * when used with 802.11a (on the 5 GHz band); filled by the
- * core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
- * when used with 802.11b (on the 2.4 GHz band); filled by the
- * core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
- * when used with 802.11g (on the 2.4 GHz band); filled by the
- * core code when registering the wiphy.
- * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
- */
-enum ieee80211_rate_flags {
- IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
- IEEE80211_RATE_MANDATORY_A = 1<<1,
- IEEE80211_RATE_MANDATORY_B = 1<<2,
- IEEE80211_RATE_MANDATORY_G = 1<<3,
- IEEE80211_RATE_ERP_G = 1<<4,
-};
-
-/**
- * struct ieee80211_rate - bitrate definition
- *
- * This structure describes a bitrate that an 802.11 PHY can
- * operate with. The two values @hw_value and @hw_value_short
- * are only for driver use when pointers to this structure are
- * passed around.
- *
- * @flags: rate-specific flags
- * @bitrate: bitrate in units of 100 Kbps
- * @hw_value: driver/hardware value for this rate
- * @hw_value_short: driver/hardware value for this rate when
- * short preamble is used
- */
-struct ieee80211_rate {
- u32 flags;
- u16 bitrate;
- u16 hw_value, hw_value_short;
-};
-
-/**
- * struct ieee80211_sta_ht_cap - STA's HT capabilities
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT capabilities for an STA.
- *
- * @ht_supported: is HT supported by the STA
- * @cap: HT capabilities map as described in 802.11n spec
- * @ampdu_factor: Maximum A-MPDU length factor
- * @ampdu_density: Minimum A-MPDU spacing
- * @mcs: Supported MCS rates
- */
-struct ieee80211_sta_ht_cap {
- u16 cap; /* use IEEE80211_HT_CAP_ */
- bool ht_supported;
- u8 ampdu_factor;
- u8 ampdu_density;
- struct ieee80211_mcs_info mcs;
-};
-
-/**
- * struct ieee80211_supported_band - frequency band definition
- *
- * This structure describes a frequency band a wiphy
- * is able to operate in.
- *
- * @channels: Array of channels the hardware can operate in
- * in this band.
- * @band: the band this structure represents
- * @n_channels: Number of channels in @channels
- * @bitrates: Array of bitrates the hardware can operate with
- * in this band. Must be sorted to give a valid "supported
- * rates" IE, i.e. CCK rates first, then OFDM.
- * @n_bitrates: Number of bitrates in @bitrates
- */
-struct ieee80211_supported_band {
- struct ieee80211_channel *channels;
- struct ieee80211_rate *bitrates;
- enum ieee80211_band band;
- int n_channels;
- int n_bitrates;
- struct ieee80211_sta_ht_cap ht_cap;
-};
-
-/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
- * has its own custom regulatory domain and cannot identify the
- * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * we will disregard the first regulatory hint (when the
- * initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * regulatory domain settings until it gets its own regulatory domain
- * via its regulatory_hint(). After its gets its own regulatory domain
- * it will only allow further regulatory domain settings to further
- * enhance compliance. For example if channel 13 and 14 are disabled
- * by this regulatory domain no user regulatory domain can enable these
- * channels at a later time. This can be used for devices which do not
- * have calibration information gauranteed for frequencies or settings
- * outside of its regulatory domain.
- * @reg_notifier: the driver's regulatory notification callback
- * @regd: the driver's regulatory domain, if one was requested via
- * the regulatory_hint() API. This can be used by the driver
- * on the reg_notifier() if it chooses to ignore future
- * regulatory domain changes caused by other drivers.
- * @signal_type: signal type reported in &struct cfg80211_bss.
- */
-struct wiphy {
- /* assign these fields before you register the wiphy */
-
- /* permanent MAC address */
- u8 perm_addr[ETH_ALEN];
-
- /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
- u16 interface_modes;
-
- bool custom_regulatory;
- bool strict_regulatory;
-
- enum cfg80211_signal_type signal_type;
-
- int bss_priv_size;
- u8 max_scan_ssids;
-
- /* If multiple wiphys are registered and you're handed e.g.
- * a regular netdev with assigned ieee80211_ptr, you won't
- * know whether it points to a wiphy your driver has registered
- * or not. Assign this to something global to your driver to
- * help determine whether you own this wiphy or not. */
- void *privid;
-
- struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
-
- /* Lets us get back the wiphy on the callback */
- int (*reg_notifier)(struct wiphy *wiphy,
- struct regulatory_request *request);
-
- /* fields below are read-only, assigned by cfg80211 */
-
- const struct ieee80211_regdomain *regd;
-
- /* the item in /sys/class/ieee80211/ points to this,
- * you need use set_wiphy_dev() (see below) */
- struct device dev;
-
- /* dir in debugfs: ieee80211/<wiphyname> */
- struct dentry *debugfsdir;
-
- char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
-};
-
-/** struct wireless_dev - wireless per-netdev state
- *
- * This structure must be allocated by the driver/stack
- * that uses the ieee80211_ptr field in struct net_device
- * (this is intentional so it can be allocated along with
- * the netdev.)
- *
- * @wiphy: pointer to hardware description
- * @iftype: interface type
- */
-struct wireless_dev {
- struct wiphy *wiphy;
- enum nl80211_iftype iftype;
-
- /* private to the generic wireless code */
- struct list_head list;
- struct net_device *netdev;
-};
-
-/**
- * wiphy_priv - return priv from wiphy
- */
-static inline void *wiphy_priv(struct wiphy *wiphy)
-{
- BUG_ON(!wiphy);
- return &wiphy->priv;
-}
-
-/**
- * set_wiphy_dev - set device pointer for wiphy
- */
-static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
-{
- wiphy->dev.parent = dev;
-}
-
-/**
- * wiphy_dev - get wiphy dev pointer
- */
-static inline struct device *wiphy_dev(struct wiphy *wiphy)
-{
- return wiphy->dev.parent;
-}
-
-/**
- * wiphy_name - get wiphy name
- */
-static inline const char *wiphy_name(struct wiphy *wiphy)
-{
- return dev_name(&wiphy->dev);
-}
-
-/**
- * wdev_priv - return wiphy priv from wireless_dev
- */
-static inline void *wdev_priv(struct wireless_dev *wdev)
-{
- BUG_ON(!wdev);
- return wiphy_priv(wdev->wiphy);
-}
-
-/**
- * wiphy_new - create a new wiphy for use with cfg80211
- *
- * create a new wiphy and associate the given operations with it.
- * @sizeof_priv bytes are allocated for private use.
- *
- * the returned pointer must be assigned to each netdev's
- * ieee80211_ptr for proper operation.
- */
-struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv);
-
-/**
- * wiphy_register - register a wiphy with cfg80211
- *
- * register the given wiphy
- *
- * Returns a non-negative wiphy index or a negative error code.
- */
-extern int wiphy_register(struct wiphy *wiphy);
-
-/**
- * wiphy_unregister - deregister a wiphy from cfg80211
- *
- * unregister a device with the given priv pointer.
- * After this call, no more requests can be made with this priv
- * pointer, but the call may sleep to wait for an outstanding
- * request that is being handled.
- */
-extern void wiphy_unregister(struct wiphy *wiphy);
-
-/**
- * wiphy_free - free wiphy
- */
-extern void wiphy_free(struct wiphy *wiphy);
-
-/**
- * ieee80211_channel_to_frequency - convert channel number to frequency
- */
-extern int ieee80211_channel_to_frequency(int chan);
-
-/**
- * ieee80211_frequency_to_channel - convert frequency to channel number
- */
-extern int ieee80211_frequency_to_channel(int freq);
-
-/*
- * Name indirection necessary because the ieee80211 code also has
- * a function named "ieee80211_get_channel", so if you include
- * cfg80211's header file you get cfg80211's version, if you try
- * to include both header files you'll (rightfully!) get a symbol
- * clash.
- */
-extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
- int freq);
-/**
- * ieee80211_get_channel - get channel struct from wiphy for specified frequency
- */
-static inline struct ieee80211_channel *
-ieee80211_get_channel(struct wiphy *wiphy, int freq)
-{
- return __ieee80211_get_channel(wiphy, freq);
-}
-
-/**
- * ieee80211_get_response_rate - get basic rate for a given rate
- *
- * @sband: the band to look for rates in
- * @basic_rates: bitmap of basic rates
- * @bitrate: the bitrate for which to find the basic rate
- *
- * This function returns the basic rate corresponding to a given
- * bitrate, that is the next lower bitrate contained in the basic
- * rate map, which is, for this function, given as a bitmap of
- * indices of rates in the band's bitrate table.
- */
-struct ieee80211_rate *
-ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
- u32 basic_rates, int bitrate);
-
-/**
- * regulatory_hint - driver hint to the wireless core a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- * conflicts)
- * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
- * should be in. If @rd is set this should be NULL. Note that if you
- * set this to NULL you should still set rd->alpha2 to some accepted
- * alpha2.
- *
- * Wireless drivers can use this function to hint to the wireless core
- * what it believes should be the current regulatory domain by
- * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
- * domain should be in or by providing a completely build regulatory domain.
- * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
- * for a regulatory domain structure for the respective country.
- *
- * The wiphy must have been registered to cfg80211 prior to this call.
- * For cfg80211 drivers this means you must first use wiphy_register(),
- * for mac80211 drivers you must first use ieee80211_register_hw().
- *
- * Drivers should check the return value, its possible you can get
- * an -ENOMEM.
- */
-extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
-
-/**
- * regulatory_hint_11d - hints a country IE as a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- * conflicts)
- * @country_ie: pointer to the country IE
- * @country_ie_len: length of the country IE
- *
- * We will intersect the rd with the what CRDA tells us should apply
- * for the alpha2 this country IE belongs to, this prevents APs from
- * sending us incorrect or outdated information against a country.
- */
-extern void regulatory_hint_11d(struct wiphy *wiphy,
- u8 *country_ie,
- u8 country_ie_len);
-/**
- * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
- * @wiphy: the wireless device we want to process the regulatory domain on
- * @regd: the custom regulatory domain to use for this wiphy
- *
- * Drivers can sometimes have custom regulatory domains which do not apply
- * to a specific country. Drivers can use this to apply such custom regulatory
- * domains. This routine must be called prior to wiphy registration. The
- * custom regulatory domain will be trusted completely and as such previous
- * default channel settings will be disregarded. If no rule is found for a
- * channel on the regulatory domain the channel will be disabled.
- */
-extern void wiphy_apply_custom_regulatory(
- struct wiphy *wiphy,
- const struct ieee80211_regdomain *regd);
-
-/**
- * freq_reg_info - get regulatory information for the given frequency
- * @wiphy: the wiphy for which we want to process this rule for
- * @center_freq: Frequency in KHz for which we want regulatory information for
- * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
- * you can set this to 0. If this frequency is allowed we then set
- * this value to the maximum allowed bandwidth.
- * @reg_rule: the regulatory rule which we have for this frequency
- *
- * Use this function to get the regulatory rule for a specific frequency on
- * a given wireless device. If the device has a specific regulatory domain
- * it wants to follow we respect that unless a country IE has been received
- * and processed already.
- *
- * Returns 0 if it was able to find a valid regulatory rule which does
- * apply to the given center_freq otherwise it returns non-zero. It will
- * also return -ERANGE if we determine the given center_freq does not even have
- * a regulatory rule for a frequency range in the center_freq's band. See
- * freq_in_rule_band() for our current definition of a band -- this is purely
- * subjective and right now its 802.11 specific.
- */
-extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
- const struct ieee80211_reg_rule **reg_rule);
-
-#endif /* __NET_WIRELESS_H */
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 666cc131732..b2410605b74 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -73,6 +73,7 @@ enum fip_state {
* @link: current link status for libfc.
* @last_link: last link state reported to libfc.
* @map_dest: use the FC_MAP mode for destination MAC addresses.
+ * @spma: supports SPMA server-provided MACs mode
* @dest_addr: MAC address of the selected FC forwarder.
* @ctl_src_addr: the native MAC address of our local port.
* @data_src_addr: the assigned MAC address for the local port after FLOGI.
@@ -104,6 +105,7 @@ struct fcoe_ctlr {
u8 link;
u8 last_link;
u8 map_dest;
+ u8 spma;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
u8 data_src_addr[ETH_ALEN];
diff --git a/include/trace/napi.h b/include/trace/napi.h
new file mode 100644
index 00000000000..a8989c4547e
--- /dev/null
+++ b/include/trace/napi.h
@@ -0,0 +1,11 @@
+#ifndef _TRACE_NAPI_H_
+#define _TRACE_NAPI_H_
+
+#include <linux/netdevice.h>
+#include <linux/tracepoint.h>
+
+DECLARE_TRACE(napi_poll,
+ TP_PROTO(struct napi_struct *napi),
+ TP_ARGS(napi));
+
+#endif