aboutsummaryrefslogtreecommitdiffstats
path: root/arch/tile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/include/arch/sim_def.h548
1 files changed, 269 insertions, 279 deletions
diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/arch/sim_def.h
index 6418fbde063..7a17082c377 100644
--- a/arch/tile/include/arch/sim_def.h
+++ b/arch/tile/include/arch/sim_def.h
@@ -1,477 +1,461 @@
-// Copyright 2010 Tilera Corporation. All Rights Reserved.
-//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU General Public License
-// as published by the Free Software Foundation, version 2.
-//
-// This program is distributed in the hope that it will be useful, but
-// WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
-// NON INFRINGEMENT. See the GNU General Public License for
-// more details.
-
-//! @file
-//!
-//! Some low-level simulator definitions.
-//!
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file
+ *
+ * Some low-level simulator definitions.
+ */
#ifndef __ARCH_SIM_DEF_H__
#define __ARCH_SIM_DEF_H__
-//! Internal: the low bits of the SIM_CONTROL_* SPR values specify
-//! the operation to perform, and the remaining bits are
-//! an operation-specific parameter (often unused).
-//!
+/**
+ * Internal: the low bits of the SIM_CONTROL_* SPR values specify
+ * the operation to perform, and the remaining bits are
+ * an operation-specific parameter (often unused).
+ */
#define _SIM_CONTROL_OPERATOR_BITS 8
-//== Values which can be written to SPR_SIM_CONTROL.
+/*
+ * Values which can be written to SPR_SIM_CONTROL.
+ */
-//! If written to SPR_SIM_CONTROL, stops profiling.
-//!
+/** If written to SPR_SIM_CONTROL, stops profiling. */
#define SIM_CONTROL_PROFILER_DISABLE 0
-//! If written to SPR_SIM_CONTROL, starts profiling.
-//!
+/** If written to SPR_SIM_CONTROL, starts profiling. */
#define SIM_CONTROL_PROFILER_ENABLE 1
-//! If written to SPR_SIM_CONTROL, clears profiling counters.
-//!
+/** If written to SPR_SIM_CONTROL, clears profiling counters. */
#define SIM_CONTROL_PROFILER_CLEAR 2
-//! If written to SPR_SIM_CONTROL, checkpoints the simulator.
-//!
+/** If written to SPR_SIM_CONTROL, checkpoints the simulator. */
#define SIM_CONTROL_CHECKPOINT 3
-//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
-//! sets the tracing mask to the given mask. See "sim_set_tracing()".
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+ * sets the tracing mask to the given mask. See "sim_set_tracing()".
+ */
#define SIM_CONTROL_SET_TRACING 4
-//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
-//! dumps the requested items of machine state to the log.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+ * dumps the requested items of machine state to the log.
+ */
#define SIM_CONTROL_DUMP 5
-//! If written to SPR_SIM_CONTROL, clears chip-level profiling counters.
-//!
+/** If written to SPR_SIM_CONTROL, clears chip-level profiling counters. */
#define SIM_CONTROL_PROFILER_CHIP_CLEAR 6
-//! If written to SPR_SIM_CONTROL, disables chip-level profiling.
-//!
+/** If written to SPR_SIM_CONTROL, disables chip-level profiling. */
#define SIM_CONTROL_PROFILER_CHIP_DISABLE 7
-//! If written to SPR_SIM_CONTROL, enables chip-level profiling.
-//!
+/** If written to SPR_SIM_CONTROL, enables chip-level profiling. */
#define SIM_CONTROL_PROFILER_CHIP_ENABLE 8
-//! If written to SPR_SIM_CONTROL, enables chip-level functional mode
-//!
+/** If written to SPR_SIM_CONTROL, enables chip-level functional mode */
#define SIM_CONTROL_ENABLE_FUNCTIONAL 9
-//! If written to SPR_SIM_CONTROL, disables chip-level functional mode.
-//!
+/** If written to SPR_SIM_CONTROL, disables chip-level functional mode. */
#define SIM_CONTROL_DISABLE_FUNCTIONAL 10
-//! If written to SPR_SIM_CONTROL, enables chip-level functional mode.
-//! All tiles must perform this write for functional mode to be enabled.
-//! Ignored in naked boot mode unless --functional is specified.
-//! WARNING: Only the hypervisor startup code should use this!
-//!
+/**
+ * If written to SPR_SIM_CONTROL, enables chip-level functional mode.
+ * All tiles must perform this write for functional mode to be enabled.
+ * Ignored in naked boot mode unless --functional is specified.
+ * WARNING: Only the hypervisor startup code should use this!
+ */
#define SIM_CONTROL_ENABLE_FUNCTIONAL_BARRIER 11
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! writes a string directly to the simulator output. Written to once for
-//! each character in the string, plus a final NUL. Instead of NUL,
-//! you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
-//!
-// ISSUE: Document the meaning of "newline", and the handling of NUL.
-//
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * writes a string directly to the simulator output. Written to once for
+ * each character in the string, plus a final NUL. Instead of NUL,
+ * you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
+ */
+/* ISSUE: Document the meaning of "newline", and the handling of NUL. */
#define SIM_CONTROL_PUTC 12
-//! If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
-//! this core. This is intended to be used before a loop that will
-//! invalidate the cache by loading new data and evicting all current data.
-//! Generally speaking, this API should only be used by system code.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
+ * this core. This is intended to be used before a loop that will
+ * invalidate the cache by loading new data and evicting all current data.
+ * Generally speaking, this API should only be used by system code.
+ */
#define SIM_CONTROL_GRINDER_CLEAR 13
-//! If written to SPR_SIM_CONTROL, shuts down the simulator.
-//!
+/** If written to SPR_SIM_CONTROL, shuts down the simulator. */
#define SIM_CONTROL_SHUTDOWN 14
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! indicates that a fork syscall just created the given process.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * indicates that a fork syscall just created the given process.
+ */
#define SIM_CONTROL_OS_FORK 15
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! indicates that an exit syscall was just executed by the given process.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * indicates that an exit syscall was just executed by the given process.
+ */
#define SIM_CONTROL_OS_EXIT 16
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! indicates that the OS just switched to the given process.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * indicates that the OS just switched to the given process.
+ */
#define SIM_CONTROL_OS_SWITCH 17
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that an exec syscall was just executed. Written to once for
-//! each character in the executable name, plus a final NUL.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that an exec syscall was just executed. Written to once for
+ * each character in the executable name, plus a final NUL.
+ */
#define SIM_CONTROL_OS_EXEC 18
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that an interpreter (PT_INTERP) was loaded. Written to once
-//! for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
-//! hex load address starting with "0x", and "PATH" is the executable name.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that an interpreter (PT_INTERP) was loaded. Written to once
+ * for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
+ * hex load address starting with "0x", and "PATH" is the executable name.
+ */
#define SIM_CONTROL_OS_INTERP 19
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that a dll was loaded. Written to once for each character
-//! in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
-//! address starting with "0x", and "PATH" is the executable name.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that a dll was loaded. Written to once for each character
+ * in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
+ * address starting with "0x", and "PATH" is the executable name.
+ */
#define SIM_CONTROL_DLOPEN 20
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that a dll was unloaded. Written to once for each character
-//! in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
-//! address starting with "0x".
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that a dll was unloaded. Written to once for each character
+ * in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
+ * address starting with "0x".
+ */
#define SIM_CONTROL_DLCLOSE 21
-//! If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
-//! indicates whether to allow data reads to remotely-cached
-//! dirty cache lines to be cached locally without grinder warnings or
-//! assertions (used by Linux kernel fast memcpy).
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
+ * indicates whether to allow data reads to remotely-cached
+ * dirty cache lines to be cached locally without grinder warnings or
+ * assertions (used by Linux kernel fast memcpy).
+ */
#define SIM_CONTROL_ALLOW_MULTIPLE_CACHING 22
-//! If written to SPR_SIM_CONTROL, enables memory tracing.
-//!
+/** If written to SPR_SIM_CONTROL, enables memory tracing. */
#define SIM_CONTROL_ENABLE_MEM_LOGGING 23
-//! If written to SPR_SIM_CONTROL, disables memory tracing.
-//!
+/** If written to SPR_SIM_CONTROL, disables memory tracing. */
#define SIM_CONTROL_DISABLE_MEM_LOGGING 24
-//! If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
-//! the gbe or xgbe shims. Must specify the shim id, the type, the units, and
-//! the rate, as defined in SIM_SHAPING_SPR_ARG.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
+ * the gbe or xgbe shims. Must specify the shim id, the type, the units, and
+ * the rate, as defined in SIM_SHAPING_SPR_ARG.
+ */
#define SIM_CONTROL_SHAPING 25
-//! If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
-//! requests that a simulator command be executed. Written to once for each
-//! character in the command, plus a final NUL.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
+ * requests that a simulator command be executed. Written to once for each
+ * character in the command, plus a final NUL.
+ */
#define SIM_CONTROL_COMMAND 26
-//! If written to SPR_SIM_CONTROL, indicates that the simulated system
-//! is panicking, to allow debugging via --debug-on-panic.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, indicates that the simulated system
+ * is panicking, to allow debugging via --debug-on-panic.
+ */
#define SIM_CONTROL_PANIC 27
-//! If written to SPR_SIM_CONTROL, triggers a simulator syscall.
-//! See "sim_syscall()" for more info.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, triggers a simulator syscall.
+ * See "sim_syscall()" for more info.
+ */
#define SIM_CONTROL_SYSCALL 32
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
-//! use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
+ * use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
+ */
#define SIM_CONTROL_OS_FORK_PARENT 33
-//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
-//! (shifted by 8), clears the pending magic data section. The cleared
-//! pending magic data section and any subsequently appended magic bytes
-//! will only take effect when the classifier blast programmer is run.
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+ * (shifted by 8), clears the pending magic data section. The cleared
+ * pending magic data section and any subsequently appended magic bytes
+ * will only take effect when the classifier blast programmer is run.
+ */
#define SIM_CONTROL_CLEAR_MPIPE_MAGIC_BYTES 34
-//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
-//! (shifted by 8) and a byte of data (shifted by 16), appends that byte
-//! to the shim's pending magic data section. The pending magic data
-//! section takes effect when the classifier blast programmer is run.
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+ * (shifted by 8) and a byte of data (shifted by 16), appends that byte
+ * to the shim's pending magic data section. The pending magic data
+ * section takes effect when the classifier blast programmer is run.
+ */
#define SIM_CONTROL_APPEND_MPIPE_MAGIC_BYTE 35
-//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
-//! (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
-//! mask of links (shifted by 32), enable or disable the corresponding
-//! mPIPE links.
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+ * (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
+ * mask of links (shifted by 32), enable or disable the corresponding
+ * mPIPE links.
+ */
#define SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE 36
-//== Syscall numbers for use with "sim_syscall()".
-//! Syscall number for sim_add_watchpoint().
-//!
+/*
+ * Syscall numbers for use with "sim_syscall()".
+ */
+
+/** Syscall number for sim_add_watchpoint(). */
#define SIM_SYSCALL_ADD_WATCHPOINT 2
-//! Syscall number for sim_remove_watchpoint().
-//!
+/** Syscall number for sim_remove_watchpoint(). */
#define SIM_SYSCALL_REMOVE_WATCHPOINT 3
-//! Syscall number for sim_query_watchpoint().
-//!
+/** Syscall number for sim_query_watchpoint(). */
#define SIM_SYSCALL_QUERY_WATCHPOINT 4
-//! Syscall number that asserts that the cache lines whose 64-bit PA
-//! is passed as the second argument to sim_syscall(), and over a
-//! range passed as the third argument, are no longer in cache.
-//! The simulator raises an error if this is not the case.
-//!
+/**
+ * Syscall number that asserts that the cache lines whose 64-bit PA
+ * is passed as the second argument to sim_syscall(), and over a
+ * range passed as the third argument, are no longer in cache.
+ * The simulator raises an error if this is not the case.
+ */
#define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5
-//== Bit masks which can be shifted by 8, combined with
-//== SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
+/*
+ * Bit masks which can be shifted by 8, combined with
+ * SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
+ */
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Enable --trace-cycle when passed to simulator_set_tracing().
-//!
+/** Enable --trace-cycle when passed to simulator_set_tracing(). */
#define SIM_TRACE_CYCLES 0x01
-//! Enable --trace-router when passed to simulator_set_tracing().
-//!
+/** Enable --trace-router when passed to simulator_set_tracing(). */
#define SIM_TRACE_ROUTER 0x02
-//! Enable --trace-register-writes when passed to simulator_set_tracing().
-//!
+/** Enable --trace-register-writes when passed to simulator_set_tracing(). */
#define SIM_TRACE_REGISTER_WRITES 0x04
-//! Enable --trace-disasm when passed to simulator_set_tracing().
-//!
+/** Enable --trace-disasm when passed to simulator_set_tracing(). */
#define SIM_TRACE_DISASM 0x08
-//! Enable --trace-stall-info when passed to simulator_set_tracing().
-//!
+/** Enable --trace-stall-info when passed to simulator_set_tracing(). */
#define SIM_TRACE_STALL_INFO 0x10
-//! Enable --trace-memory-controller when passed to simulator_set_tracing().
-//!
+/** Enable --trace-memory-controller when passed to simulator_set_tracing(). */
#define SIM_TRACE_MEMORY_CONTROLLER 0x20
-//! Enable --trace-l2 when passed to simulator_set_tracing().
-//!
+/** Enable --trace-l2 when passed to simulator_set_tracing(). */
#define SIM_TRACE_L2_CACHE 0x40
-//! Enable --trace-lines when passed to simulator_set_tracing().
-//!
+/** Enable --trace-lines when passed to simulator_set_tracing(). */
#define SIM_TRACE_LINES 0x80
-//! Turn off all tracing when passed to simulator_set_tracing().
-//!
+/** Turn off all tracing when passed to simulator_set_tracing(). */
#define SIM_TRACE_NONE 0
-//! Turn on all tracing when passed to simulator_set_tracing().
-//!
+/** Turn on all tracing when passed to simulator_set_tracing(). */
#define SIM_TRACE_ALL (-1)
-//! @}
+/** @} */
-//! Computes the value to write to SPR_SIM_CONTROL to set tracing flags.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to set tracing flags. */
#define SIM_TRACE_SPR_ARG(mask) \
(SIM_CONTROL_SET_TRACING | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//== Bit masks which can be shifted by 8, combined with
-//== SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
+/*
+ * Bit masks which can be shifted by 8, combined with
+ * SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
+ */
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Dump the general-purpose registers.
-//!
+/** Dump the general-purpose registers. */
#define SIM_DUMP_REGS 0x001
-//! Dump the SPRs.
-//!
+/** Dump the SPRs. */
#define SIM_DUMP_SPRS 0x002
-//! Dump the ITLB.
-//!
+/** Dump the ITLB. */
#define SIM_DUMP_ITLB 0x004
-//! Dump the DTLB.
-//!
+/** Dump the DTLB. */
#define SIM_DUMP_DTLB 0x008
-//! Dump the L1 I-cache.
-//!
+/** Dump the L1 I-cache. */
#define SIM_DUMP_L1I 0x010
-//! Dump the L1 D-cache.
-//!
+/** Dump the L1 D-cache. */
#define SIM_DUMP_L1D 0x020
-//! Dump the L2 cache.
-//!
+/** Dump the L2 cache. */
#define SIM_DUMP_L2 0x040
-//! Dump the switch registers.
-//!
+/** Dump the switch registers. */
#define SIM_DUMP_SNREGS 0x080
-//! Dump the switch ITLB.
-//!
+/** Dump the switch ITLB. */
#define SIM_DUMP_SNITLB 0x100
-//! Dump the switch L1 I-cache.
-//!
+/** Dump the switch L1 I-cache. */
#define SIM_DUMP_SNL1I 0x200
-//! Dump the current backtrace.
-//!
+/** Dump the current backtrace. */
#define SIM_DUMP_BACKTRACE 0x400
-//! Only dump valid lines in caches.
-//!
+/** Only dump valid lines in caches. */
#define SIM_DUMP_VALID_LINES 0x800
-//! Dump everything that is dumpable.
-//!
+/** Dump everything that is dumpable. */
#define SIM_DUMP_ALL (-1 & ~SIM_DUMP_VALID_LINES)
-// @}
+/** @} */
-//! Computes the value to write to SPR_SIM_CONTROL to dump machine state.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to dump machine state. */
#define SIM_DUMP_SPR_ARG(mask) \
(SIM_CONTROL_DUMP | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//== Bit masks which can be shifted by 8, combined with
-//== SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
+/*
+ * Bit masks which can be shifted by 8, combined with
+ * SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
+ */
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers. */
#define SIM_CHIP_MEMCTL 0x001
-//! Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface. */
#define SIM_CHIP_XAUI 0x002
-//! Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface. */
#define SIM_CHIP_PCIE 0x004
-//! Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface. */
#define SIM_CHIP_MPIPE 0x008
-//! Reference all chip devices.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the TRIO interface. */
+#define SIM_CHIP_TRIO 0x010
+
+/** Reference all chip devices. */
#define SIM_CHIP_ALL (-1)
-//! @}
+/** @} */
-//! Computes the value to write to SPR_SIM_CONTROL to clear chip statistics.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to clear chip statistics. */
#define SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_CLEAR | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//! Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.*/
#define SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_DISABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//! Computes the value to write to SPR_SIM_CONTROL to enable chip statistics.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to enable chip statistics. */
#define SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_ENABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-// Shim bitrate controls.
+/* Shim bitrate controls. */
-//! The number of bits used to store the shim id.
-//!
+/** The number of bits used to store the shim id. */
#define SIM_CONTROL_SHAPING_SHIM_ID_BITS 3
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Change the gbe 0 bitrate.
-//!
+/** Change the gbe 0 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_0 0x0
-//! Change the gbe 1 bitrate.
-//!
+/** Change the gbe 1 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_1 0x1
-//! Change the gbe 2 bitrate.
-//!
+/** Change the gbe 2 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_2 0x2
-//! Change the gbe 3 bitrate.
-//!
+/** Change the gbe 3 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_3 0x3
-//! Change the xgbe 0 bitrate.
-//!
+/** Change the xgbe 0 bitrate. */
#define SIM_CONTROL_SHAPING_XGBE_0 0x4
-//! Change the xgbe 1 bitrate.
-//!
+/** Change the xgbe 1 bitrate. */
#define SIM_CONTROL_SHAPING_XGBE_1 0x5
-//! The type of shaping to do.
-//!
+/** The type of shaping to do. */
#define SIM_CONTROL_SHAPING_TYPE_BITS 2
-//! Control the multiplier.
-//!
+/** Control the multiplier. */
#define SIM_CONTROL_SHAPING_MULTIPLIER 0
-//! Control the PPS.
-//!
+/** Control the PPS. */
#define SIM_CONTROL_SHAPING_PPS 1
-//! Control the BPS.
-//!
+/** Control the BPS. */
#define SIM_CONTROL_SHAPING_BPS 2
-//! The number of bits for the units for the shaping parameter.
-//!
+/** The number of bits for the units for the shaping parameter. */
#define SIM_CONTROL_SHAPING_UNITS_BITS 2
-//! Provide a number in single units.
-//!
+/** Provide a number in single units. */
#define SIM_CONTROL_SHAPING_UNITS_SINGLE 0
-//! Provide a number in kilo units.
-//!
+/** Provide a number in kilo units. */
#define SIM_CONTROL_SHAPING_UNITS_KILO 1
-//! Provide a number in mega units.
-//!
+/** Provide a number in mega units. */
#define SIM_CONTROL_SHAPING_UNITS_MEGA 2
-//! Provide a number in giga units.
-//!
+/** Provide a number in giga units. */
#define SIM_CONTROL_SHAPING_UNITS_GIGA 3
-// @}
+/** @} */
-//! How many bits are available for the rate.
-//!
+/** How many bits are available for the rate. */
#define SIM_CONTROL_SHAPING_RATE_BITS \
(32 - (_SIM_CONTROL_OPERATOR_BITS + \
SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
SIM_CONTROL_SHAPING_TYPE_BITS + \
SIM_CONTROL_SHAPING_UNITS_BITS))
-//! Computes the value to write to SPR_SIM_CONTROL to change a bitrate.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to change a bitrate. */
#define SIM_SHAPING_SPR_ARG(shim, type, units, rate) \
(SIM_CONTROL_SHAPING | \
((shim) | \
@@ -483,30 +467,36 @@
SIM_CONTROL_SHAPING_UNITS_BITS))) << _SIM_CONTROL_OPERATOR_BITS)
-//== Values returned when reading SPR_SIM_CONTROL.
-// ISSUE: These names should share a longer common prefix.
+/*
+ * Values returned when reading SPR_SIM_CONTROL.
+ * ISSUE: These names should share a longer common prefix.
+ */
-//! When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
-//! (SIM_TRACE_xxx values).
-//!
+/**
+ * When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
+ * (SIM_TRACE_xxx values).
+ */
#define SIM_TRACE_FLAG_MASK 0xFFFF
-//! When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled.
-//!
+/** When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled. */
#define SIM_PROFILER_ENABLED_MASK 0x10000
-//== Special arguments for "SIM_CONTROL_PUTC".
+/*
+ * Special arguments for "SIM_CONTROL_PUTC".
+ */
-//! Flag value for forcing a PUTC string-flush, including
-//! coordinate/cycle prefix and newline.
-//!
+/**
+ * Flag value for forcing a PUTC string-flush, including
+ * coordinate/cycle prefix and newline.
+ */
#define SIM_PUTC_FLUSH_STRING 0x100
-//! Flag value for forcing a PUTC binary-data-flush, which skips the
-//! prefix and does not append a newline.
-//!
+/**
+ * Flag value for forcing a PUTC binary-data-flush, which skips the
+ * prefix and does not append a newline.
+ */
#define SIM_PUTC_FLUSH_BINARY 0x101
-#endif //__ARCH_SIM_DEF_H__
+#endif /* __ARCH_SIM_DEF_H__ */