Diffstat (limited to 'Documentation/hwmon/k10temp')
1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
new file mode 100644
@@ -0,0 +1,60 @@
+Kernel driver k10temp
+* AMD Family 10h processors:
+ Socket F: Quad-Core/Six-Core/Embedded Opteron
+ Socket AM2+: Opteron, Phenom (II) X3/X4
+ Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
+ Socket S1G3: Athlon II, Sempron, Turion II
+* AMD Family 11h processors:
+ Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+ Prefix: 'k10temp'
+ Addresses scanned: PCI space
+ BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
+ Revision Guide for AMD Family 10h Processors:
+ Revision Guide for AMD Family 11h Processors:
+ AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
+ AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
+ AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
+Author: Clemens Ladisch <firstname.lastname@example.org>
+This driver permits reading of the internal temperature sensor of AMD
+Family 10h and 11h processors.
+All these processors have a sensor, but on older revisions of Family 10h
+processors, the sensor may return inconsistent values (erratum 319). The
+driver will refuse to load on these revisions unless you specify the
+"force=1" module parameter.
+There is one temperature measurement value, available as temp1_input in
+sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
+Please note that it is defined as a relative value; to quote the AMD manual:
+ Tctl is the processor temperature control value, used by the platform to
+ control cooling systems. Tctl is a non-physical temperature on an
+ arbitrary scale measured in degrees. It does _not_ represent an actual
+ physical temperature like die or case temperature. Instead, it specifies
+ the processor temperature relative to the point at which the system must
+ supply the maximum cooling for the processor's specified maximum case
+ temperature and maximum thermal power dissipation.
+The maximum value for Tctl is available in the file temp1_max.
+If the BIOS has enabled hardware temperature control, the threshold at
+which the processor will throttle itself to avoid damage is available in
+temp1_crit and temp1_crit_hyst.