aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c8
-rw-r--r--arch/arm/mach-s3c2416/irq.c5
-rw-r--r--arch/arm/mach-s3c2443/irq.c5
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-real6410.c2
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c1
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c1
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c147
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c33
-rw-r--r--arch/arm/plat-pxa/include/plat/sdhci.h3
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c6
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c6
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c6
-rw-r--r--block/blk-throttle.c2
-rw-r--r--drivers/block/amiflop.c2
-rw-r--r--drivers/block/ataflop.c2
-rw-r--r--drivers/block/cciss.c3
-rw-r--r--drivers/block/xen-blkfront.c55
-rw-r--r--drivers/mmc/core/core.c2
-rw-r--r--drivers/mmc/core/mmc.c8
-rw-r--r--drivers/mmc/core/sdio.c51
-rw-r--r--drivers/mmc/core/sdio_bus.c33
-rw-r--r--drivers/mmc/host/omap_hsmmc.c2
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c12
-rw-r--r--drivers/mmc/host/sdhci-pci.c31
-rw-r--r--drivers/mmc/host/sdhci-pxa.c4
-rw-r--r--drivers/mmc/host/sdhci.c54
-rw-r--r--drivers/mmc/host/sdhci.h9
-rw-r--r--drivers/mmc/host/ushc.c30
-rw-r--r--fs/ioprio.c31
-rw-r--r--fs/nilfs2/dat.c2
-rw-r--r--fs/nilfs2/ioctl.c4
-rw-r--r--include/linux/mmc/host.h1
-rw-r--r--include/linux/pci_ids.h1
-rw-r--r--include/sound/sh_fsi.h6
-rw-r--r--sound/soc/sh/fsi.c25
36 files changed, 386 insertions, 209 deletions
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8aa2f1902a9..6b86a722a7d 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
/* Configures BT serial port GPIOs */
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
- s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
- s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
- s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 084d121f368..00174daf152 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
- s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+ s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2416_irq_uart3_mask(unsigned int irqno)
{
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 0e0d693f397..893424767ce 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
- s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+ s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2443_irq_uart3_mask(unsigned int irqno)
{
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 249c6295647..89f35e02e88 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -45,7 +45,7 @@
#include <video/platform_lcd.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index f9ef9b5c5f5..4957ab0a0d4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -46,7 +46,7 @@
#include <video/platform_lcd.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 0ad7924fe62..5dd1681c069 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
+#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bcd7a5d5340..1fbc45b2a43 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d3260542b94..d440e5f456a 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+ int ret = 0;
+
+ if (rate <= 0)
+ return ret;
+
+ if (enable) {
+ ret = clk_set_rate(clk, rate);
+ if (0 == ret)
+ ret = clk_enable(clk);
+ } else {
+ clk_disable(clk);
+ }
+
+ return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+ return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
-static int fsi_set_rate(int is_porta, int rate)
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+ struct clk *fsia_ick;
+ struct clk *fsiack;
+ int ret = -EIO;
+
+ fsia_ick = clk_get(dev, "icka");
+ if (IS_ERR(fsia_ick))
+ return PTR_ERR(fsia_ick);
+
+ /*
+ * FSIACK is connected to AK4642,
+ * and use external clock pin from it.
+ * it is parent of fsia_ick now.
+ */
+ fsiack = clk_get_parent(fsia_ick);
+ if (!fsiack)
+ goto fsia_ick_out;
+
+ /*
+ * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+ *
+ ** FIXME **
+ * Because the freq_table of external clk (fsiack) are all 0,
+ * the return value of clk_round_rate became 0.
+ * So, it use __fsi_set_rate here.
+ */
+ ret = __fsi_set_rate(fsiack, rate, enable);
+ if (ret < 0)
+ goto fsiack_out;
+
+ ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+ if ((ret < 0) && enable)
+ __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+ clk_put(fsiack);
+
+fsia_ick_out:
+ clk_put(fsia_ick);
+
+ return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
{
struct clk *fsib_clk;
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+ long fsib_rate = 0;
+ long fdiv_rate = 0;
+ int ackmd_bpfmd;
int ret;
- /* set_rate is not needed if port A */
- if (is_porta)
- return 0;
-
- fsib_clk = clk_get(NULL, "fsib_clk");
- if (IS_ERR(fsib_clk))
- return -EINVAL;
-
switch (rate) {
case 44100:
- clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
- ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ fsib_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
case 48000:
- clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
- clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
- ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
+ fdiv_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
default:
pr_err("unsupported rate in FSI2 port B\n");
- ret = -EINVAL;
- break;
+ return -EINVAL;
}
+ /* FSI B setting */
+ fsib_clk = clk_get(dev, "ickb");
+ if (IS_ERR(fsib_clk))
+ return -EIO;
+
+ ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
clk_put(fsib_clk);
+ if (ret < 0)
+ return ret;
+
+ /* FSI DIV setting */
+ ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+ if (ret < 0) {
+ /* disable FSI B */
+ if (enable)
+ __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+ return ret;
+ }
+
+ return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+ int ret;
+
+ if (is_porta)
+ ret = fsi_ak4642_set_rate(dev, rate, enable);
+ else
+ ret = fsi_hdmi_set_rate(dev, rate, enable);
return ret;
}
@@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
goto out;
}
+ ret = clk_enable(&sh7372_pllc2_clk);
+ if (ret < 0) {
+ pr_err("Cannot enable pllc2 clock\n");
+ goto out;
+ }
pr_debug("PLLC2 set frequency %lu\n", rate);
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@ out:
device_initcall(hdmi_init_pm_clock);
-#define FSIACK_DUMMY_RATE 48000
static int __init fsi_init_pm_clock(void)
{
struct clk *fsia_ick;
int ret;
- /*
- * FSIACK is connected to AK4642,
- * and the rate is depend on playing sound rate.
- * So, set dummy rate (= 48k) here
- */
- ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
- if (ret < 0) {
- pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
- return ret;
- }
-
fsia_ick = clk_get(&fsi_device.dev, "icka");
if (IS_ERR(fsia_ick)) {
ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
}
ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
- if (ret < 0) {
- pr_err("Cannot set FSI-A parent: %d\n", ret);
- goto out;
- }
-
- ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
if (ret < 0)
- pr_err("Cannot set FSI-A rate: %d\n", ret);
+ pr_err("Cannot set FSI-A parent: %d\n", ret);
-out:
clk_put(fsia_ick);
return ret;
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index b25ce90a346..3aa02606943 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -229,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate)
if (idx < 0)
return idx;
- if (rate == clk->parent->rate) {
- pllc2_disable(clk);
- return 0;
- }
+ if (rate == clk->parent->rate)
+ return -EINVAL;
value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
- if (value & 0x80000000)
- pllc2_disable(clk);
-
__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
- if (value & 0x80000000)
- return pllc2_enable(clk);
-
return 0;
}
@@ -452,10 +444,8 @@ static int fsidiv_enable(struct clk *clk)
unsigned long value;
value = __raw_readl(clk->mapping->base) >> 16;
- if (value < 2) {
- fsidiv_disable(clk);
- return -ENOENT;
- }
+ if (value < 2)
+ return -EIO;
__raw_writel((value << 16) | 0x3, clk->mapping->base);
@@ -466,17 +456,12 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
{
int idx;
- if (clk->parent->rate == rate) {
- fsidiv_disable(clk);
- return 0;
- }
-
idx = (clk->parent->rate / rate) & 0xffff;
if (idx < 2)
- return -ENOENT;
+ return -EINVAL;
__raw_writel(idx << 16, clk->mapping->base);
- return fsidiv_enable(clk);
+ return 0;
}
static struct clk_ops fsidiv_clk_ops = {
@@ -607,8 +592,6 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
- CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
- CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -645,8 +628,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
- CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
- CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h
index e49c5b6fc4e..1ab332e37d7 100644
--- a/arch/arm/plat-pxa/include/plat/sdhci.h
+++ b/arch/arm/plat-pxa/include/plat/sdhci.h
@@ -17,6 +17,9 @@
/* Require clock free running */
#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
/*
* struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
* @max_speed: the maximum speed supported
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9793544a6ac..704175b0573 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
}
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
index db9e9e477ec..72457afd625 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
}
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8ea663a438b..c3972b645d1 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
}
}
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 56ad4531b41..004be80fd89 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -645,7 +645,7 @@ static int throtl_dispatch_tg(struct throtl_data *td, struct throtl_grp *tg,
{
unsigned int nr_reads = 0, nr_writes = 0;
unsigned int max_nr_reads = throtl_grp_quantum*3/4;
- unsigned int max_nr_writes = throtl_grp_quantum - nr_reads;
+ unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads;
struct bio *bio;
/* Try to dispatch 75% READS and 25% WRITES */
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index a1725e6488d..7888501ad9e 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1341,7 +1341,7 @@ static struct request *set_next_request(void)
{
struct request_queue *q;
int cnt = FD_MAX_UNITS;
- struct request *rq;
+ struct request *rq = NULL;
/* Find next queue we can dispatch from */
fdc_queue = fdc_queue + 1;
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 4e4cc6c828c..605a67e40bb 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1399,7 +1399,7 @@ static struct request *set_next_request(void)
{
struct request_queue *q;
int old_pos = fdc_queue;
- struct request *rq;
+ struct request *rq = NULL;
do {
q = unit[fdc_queue].disk->queue;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index a67d0a611a8..f291587d753 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -66,6 +66,7 @@ MODULE_VERSION("3.6.26");
MODULE_LICENSE("GPL");
static DEFINE_MUTEX(cciss_mutex);
+static struct proc_dir_entry *proc_cciss;
#include "cciss_cmd.h"
#include "cciss.h"
@@ -363,8 +364,6 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
#define ENG_GIG_FACTOR (ENG_GIG/512)
#define ENGAGE_SCSI "engage scsi"
-static struct proc_dir_entry *proc_cciss;
-
static void cciss_seq_show_header(struct seq_file *seq)
{
ctlr_info_t *h = seq->private;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 255035cfc88..4f9e22f2913 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -65,7 +65,7 @@ enum blkif_state {
struct blk_shadow {
struct blkif_request req;
- unsigned long request;
+ struct request *request;
unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
};
@@ -136,7 +136,7 @@ static void add_id_to_freelist(struct blkfront_info *info,
unsigned long id)
{
info->shadow[id].req.id = info->shadow_free;
- info->shadow[id].request = 0;
+ info->shadow[id].request = NULL;
info->shadow_free = id;
}
@@ -245,14 +245,11 @@ static int blkif_ioctl(struct block_device *bdev, fmode_t mode,
}
/*
- * blkif_queue_request
+ * Generate a Xen blkfront IO request from a blk layer request. Reads
+ * and writes are handled as expected. Since we lack a loose flush
+ * request, we map flushes into a full ordered barrier.
*
- * request block io
- *
- * id: for guest use only.
- * operation: BLKIF_OP_{READ,WRITE,PROBE}
- * buffer: buffer to read/write into. this should be a
- * virtual address in the guest os.
+ * @req: a request struct
*/
static int blkif_queue_request(struct request *req)
{
@@ -281,7 +278,7 @@ static int blkif_queue_request(struct request *req)
/* Fill out a communications ring structure. */
ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
id = get_id_from_freelist(info);
- info->shadow[id].request = (unsigned long)req;
+ info->shadow[id].request = req;
ring_req->id = id;
ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
@@ -290,6 +287,18 @@ static int blkif_queue_request(struct request *req)
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
+ if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+ /*
+ * Ideally we could just do an unordered
+ * flush-to-disk, but all we have is a full write
+ * barrier at the moment. However, a barrier write is
+ * a superset of FUA, so we can implement it the same
+ * way. (It's also a FLUSH+FUA, since it is
+ * guaranteed ordered WRT previous writes.)
+ */
+ ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+ }
+
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
@@ -634,7 +643,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
bret = RING_GET_RESPONSE(&info->ring, i);
id = bret->id;
- req = (struct request *)info->shadow[id].request;
+ req = info->shadow[id].request;
blkif_completion(&info->shadow[id]);
@@ -647,6 +656,16 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
info->gd->disk_name);
error = -EOPNOTSUPP;
+ }
+ if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+ info->shadow[id].req.nr_segments == 0)) {
+ printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n",
+ info->gd->disk_name);
+ error = -EOPNOTSUPP;
+ }
+ if (unlikely(error)) {
+ if (error == -EOPNOTSUPP)
+ error = 0;
info->feature_flush = 0;
xlvbd_flush(info);
}
@@ -899,7 +918,7 @@ static int blkif_recover(struct blkfront_info *info)
/* Stage 3: Find pending requests and requeue them. */
for (i = 0; i < BLK_RING_SIZE; i++) {
/* Not in use? */
- if (copy[i].request == 0)
+ if (!copy[i].request)
continue;
/* Grab a request slot and copy shadow state into it. */
@@ -916,9 +935,7 @@ static int blkif_recover(struct blkfront_info *info)
req->seg[j].gref,
info->xbdev->otherend_id,
pfn_to_mfn(info->shadow[req->id].frame[j]),
- rq_data_dir(
- (struct request *)
- info->shadow[req->id].request));
+ rq_data_dir(info->shadow[req->id].request));
info->shadow[req->id].req = *req;
info->ring.req_prod_pvt++;
@@ -1067,14 +1084,8 @@ static void blkfront_connect(struct blkfront_info *info)
*/
info->feature_flush = 0;
- /*
- * The driver doesn't properly handled empty flushes, so
- * lets disable barrier support for now.
- */
-#if 0
if (!err && barrier)
- info->feature_flush = REQ_FLUSH;
-#endif
+ info->feature_flush = REQ_FLUSH | REQ_FUA;
err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
if (err) {
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d702e46..31ae07a3657 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host)
if (host->caps & MMC_CAP_DISABLE)
cancel_delayed_work(&host->disable);
- cancel_delayed_work(&host->detect);
+ cancel_delayed_work_sync(&host->detect);
mmc_flush_scheduled_work();
/* clear pm flags now and let card drivers set them as needed */
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 995261f7fd7..77f93c3b880 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
struct mmc_card *oldcard)
{
struct mmc_card *card;
- int err, ddr = MMC_SDR_MODE;
+ int err, ddr = 0;
u32 cid[4];
unsigned int max_dtr;
@@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
1 << bus_width, ddr);
err = 0;
} else {
- mmc_card_set_ddr_mode(card);
+ if (ddr)
+ mmc_card_set_ddr_mode(card);
+ else
+ ddr = MMC_SDR_MODE;
+
mmc_set_bus_width_ddr(card->host, bus_width, ddr);
}
}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c3ad1058cd3..efef5f94ac4 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
BUG_ON(!host->card);
/* Make sure card is powered before detecting it */
- err = pm_runtime_get_sync(&host->card->dev);
- if (err < 0)
- goto out;
+ if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+ err = pm_runtime_get_sync(&host->card->dev);
+ if (err < 0)
+ goto out;
+ }
mmc_claim_host(host);
@@ -560,6 +562,20 @@ static void mmc_sdio_detect(struct mmc_host *host)
mmc_release_host(host);
+ /*
+ * Tell PM core it's OK to power off the card now.
+ *
+ * The _sync variant is used in order to ensure that the card
+ * is left powered off in case an error occurred, and the card
+ * is going to be removed.
+ *
+ * Since there is no specific reason to believe a new user
+ * is about to show up at this point, the _sync variant is
+ * desirable anyway.
+ */
+ if (host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_sync(&host->card->dev);
+
out:
if (err) {
mmc_sdio_remove(host);
@@ -568,9 +584,6 @@ out:
mmc_detach_bus(host);
mmc_release_host(host);
}
-
- /* Tell PM core that we're done */
- pm_runtime_put(&host->card->dev);
}
/*
@@ -718,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
card = host->card;
/*
- * Let runtime PM core know our card is active
+ * Enable runtime PM only if supported by host+card+board
*/
- err = pm_runtime_set_active(&card->dev);
- if (err)
- goto remove;
+ if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+ /*
+ * Let runtime PM core know our card is active
+ */
+ err = pm_runtime_set_active(&card->dev);
+ if (err)
+ goto remove;
- /*
- * Enable runtime PM for this card
- */
- pm_runtime_enable(&card->dev);
+ /*
+ * Enable runtime PM for this card
+ */
+ pm_runtime_enable(&card->dev);
+ }
/*
* The number of functions on the card is encoded inside
@@ -745,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
goto remove;
/*
- * Enable Runtime PM for this func
+ * Enable Runtime PM for this func (if supported)
*/
- pm_runtime_enable(&card->sdio_func[i]->dev);
+ if (host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_enable(&card->sdio_func[i]->dev);
}
mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 2716c7ab6bb..203da443e33 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -17,6 +17,7 @@
#include <linux/pm_runtime.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sdio_func.h>
#include "sdio_cis.h"
@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
* it should call pm_runtime_put_noidle() in its probe routine and
* pm_runtime_get_noresume() in its remove routine.
*/
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- goto out;
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0)
+ goto out;
+ }
/* Set the default block size so the driver is sure it's something
* sensible. */
@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
return 0;
disable_runtimepm:
- pm_runtime_put_noidle(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_noidle(dev);
out:
return ret;
}
@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
{
struct sdio_driver *drv = to_sdio_driver(dev->driver);
struct sdio_func *func = dev_to_sdio_func(dev);
- int ret;
+ int ret = 0;
/* Make sure card is powered before invoking ->remove() */
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- goto out;
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0)
+ goto out;
+ }
drv->remove(func);
@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
}
/* First, undo the increment made directly above */
- pm_runtime_put_noidle(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_noidle(dev);
/* Then undo the runtime PM settings in sdio_bus_probe() */
- pm_runtime_put_noidle(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_put_noidle(dev);
out:
return ret;
@@ -191,6 +199,8 @@ out:
static int sdio_bus_pm_prepare(struct device *dev)
{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+
/*
* Resume an SDIO device which was suspended at run time at this
* point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
* since there is little point in failing system suspend if a
* device can't be resumed.
*/
- pm_runtime_resume(dev);
+ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+ pm_runtime_resume(dev);
return 0;
}
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 82a1079bbdc..5d46021cbb5 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
* Monitor a 0->1 transition first
*/
if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
- while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+ while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
&& (i++ < limit))
cpu_relax();
}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2e9cca19c90..9b82910b9db 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -112,6 +113,13 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
clk_enable(clk);
pltfm_host->clk = clk;
+ if (cpu_is_mx35() || cpu_is_mx51())
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ /* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+ if (cpu_is_mx25() || cpu_is_mx35())
+ host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
return 0;
}
@@ -133,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = {
};
struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
- .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
- | SDHCI_QUIRK_BROKEN_ADMA,
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
/* ADMA has issues. Might be fixable */
- /* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
.ops = &sdhci_esdhc_ops,
.init = esdhc_pltfm_init,
.exit = esdhc_pltfm_exit,
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 55746bac2f4..3d9c2460d43 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = {
* ADMA operation is disabled for Moorestown platform due to
* hardware bugs.
*/
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
{
/*
- * slots number is fixed here for MRST as SDIO3 is never used and has
- * hardware bugs.
+ * slots number is fixed here for MRST as SDIO3/5 are never used and
+ * have hardware bugs.
*/
chip->num_slots = 1;
return 0;
@@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
};
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
- .probe = mrst_hc1_probe,
+ .probe = mrst_hc_probe,
};
static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_INTEL_MRST_SD1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_MRST_SD2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
},
{
@@ -637,6 +645,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
+ mmc_pm_flag_t slot_pm_flags;
mmc_pm_flag_t pm_flags = 0;
int i, ret;
@@ -657,7 +666,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
return ret;
}
- pm_flags |= slot->host->mmc->pm_flags;
+ slot_pm_flags = slot->host->mmc->pm_flags;
+ if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+ sdhci_enable_irq_wakeups(slot->host);
+
+ pm_flags |= slot_pm_flags;
}
if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +684,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
pci_save_state(pdev);
if (pm_flags & MMC_PM_KEEP_POWER) {
- if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+ if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+ pci_pme_active(pdev, true);
pci_enable_wake(pdev, PCI_D3hot, 1);
+ }
pci_set_power_state(pdev, PCI_D3hot);
} else {
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
index fc406ac5d19..5a61208cbc6 100644
--- a/drivers/mmc/host/sdhci-pxa.c
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
if (pdata->quirks)
host->quirks |= pdata->quirks;
+ /* If slot design supports 8 bit data, indicate this to MMC. */
+ if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(&pdev->dev, "failed to add host\n");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee3c92..a25db426c91 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->ops->platform_send_init_74_clocks)
host->ops->platform_send_init_74_clocks(host, ios->power_mode);
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-
- if (ios->bus_width == MMC_BUS_WIDTH_8)
- ctrl |= SDHCI_CTRL_8BITBUS;
- else
- ctrl &= ~SDHCI_CTRL_8BITBUS;
+ /*
+ * If your platform has 8-bit width support but is not a v3 controller,
+ * or if it requires special setup code, you should implement that in
+ * platform_8bit_width().
+ */
+ if (host->ops->platform_8bit_width)
+ host->ops->platform_8bit_width(host, ios->bus_width);
+ else {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (ios->bus_width == MMC_BUS_WIDTH_8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ } else {
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
- if (ios->bus_width == MMC_BUS_WIDTH_4)
- ctrl |= SDHCI_CTRL_4BITBUS;
- else
- ctrl &= ~SDHCI_CTRL_4BITBUS;
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if ((ios->timing == MMC_TIMING_SD_HS ||
ios->timing == MMC_TIMING_MMC_HS)
@@ -1681,6 +1695,16 @@ int sdhci_resume_host(struct sdhci_host *host)
EXPORT_SYMBOL_GPL(sdhci_resume_host);
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+ u8 val;
+ val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+ val |= SDHCI_WAKE_ON_INT;
+ sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
#endif /* CONFIG_PM */
/*****************************************************************************\
@@ -1845,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
mmc->f_max = host->max_clk;
mmc->caps |= MMC_CAP_SDIO_IRQ;
+ /*
+ * A controller may support 8-bit width, but the board itself
+ * might not have the pins brought out. Boards that support
+ * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+ * their platform code before calling sdhci_add_host(), and we
+ * won't assume 8-bit width for hosts without that CAP.
+ */
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b7b8a3b28b0..e42d7f00c06 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -76,7 +76,7 @@
#define SDHCI_CTRL_ADMA1 0x08
#define SDHCI_CTRL_ADMA32 0x10
#define SDHCI_CTRL_ADMA64 0x18
-#define SDHCI_CTRL_8BITBUS 0x20
+#define SDHCI_CTRL_8BITBUS 0x20
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
@@ -87,6 +87,9 @@
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
#define SDHCI_WAKE_UP_CONTROL 0x2B
+#define SDHCI_WAKE_ON_INT 0x01
+#define SDHCI_WAKE_ON_INSERT 0x02
+#define SDHCI_WAKE_ON_REMOVE 0x04
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_SHIFT 8
@@ -152,6 +155,7 @@
#define SDHCI_CLOCK_BASE_SHIFT 8
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
+#define SDHCI_CAN_DO_8BIT 0x00040000
#define SDHCI_CAN_DO_ADMA2 0x00080000
#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
@@ -212,6 +216,8 @@ struct sdhci_ops {
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_min_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
+ int (*platform_8bit_width)(struct sdhci_host *host,
+ int width);
void (*platform_send_init_74_clocks)(struct sdhci_host *host,
u8 power_mode);
unsigned int (*get_ro)(struct sdhci_host *host);
@@ -317,6 +323,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
#ifdef CONFIG_PM
extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
#endif
#endif /* __SDHCI_HW_H */
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index b4ead4a13c9..f8f65df9b01 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct mmc_host *mmc;
struct ushc_data *ushc;
- int ret = -ENOMEM;
+ int ret;
mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
if (mmc == NULL)
@@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
mmc->max_blk_count = 511;
ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->int_urb == NULL)
+ if (ushc->int_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
- if (ushc->int_data == NULL)
+ if (ushc->int_data == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
usb_rcvintpipe(usb_dev,
intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
intf->cur_altsetting->endpoint[0].desc.bInterval);
ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->cbw_urb == NULL)
+ if (ushc->cbw_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
- if (ushc->cbw == NULL)
+ if (ushc->cbw == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->cbw->signature = USHC_CBW_SIGNATURE;
usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
cbw_callback, ushc);
ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->data_urb == NULL)
+ if (ushc->data_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (ushc->csw_urb == NULL)
+ if (ushc->csw_urb == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
- if (ushc->csw == NULL)
+ if (ushc->csw == NULL) {
+ ret = -ENOMEM;
goto err;
+ }
usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
ushc->csw, sizeof(struct ushc_csw),
csw_callback, ushc);
diff --git a/fs/ioprio.c b/fs/ioprio.c
index 2f7d05c8992..7da2a06508e 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -103,22 +103,15 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
}
ret = -ESRCH;
- /*
- * We want IOPRIO_WHO_PGRP/IOPRIO_WHO_USER to be "atomic",
- * so we can't use rcu_read_lock(). See re-copy of ->ioprio
- * in copy_process().
- */
- read_lock(&tasklist_lock);
+ rcu_read_lock();
switch (which) {
case IOPRIO_WHO_PROCESS:
- rcu_read_lock();
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = set_task_ioprio(p, ioprio);
- rcu_read_unlock();
break;
case IOPRIO_WHO_PGRP:
if (!who)
@@ -141,12 +134,7 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
break;
do_each_thread(g, p) {
- int match;
-
- rcu_read_lock();
- match = __task_cred(p)->uid == who;
- rcu_read_unlock();
- if (!match)
+ if (__task_cred(p)->uid != who)
continue;
ret = set_task_ioprio(p, ioprio);
if (ret)
@@ -160,7 +148,7 @@ free_uid:
ret = -EINVAL;
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return ret;
}
@@ -204,17 +192,15 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
int ret = -ESRCH;
int tmpio;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
switch (which) {
case IOPRIO_WHO_PROCESS:
- rcu_read_lock();
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = get_task_ioprio(p);
- rcu_read_unlock();
break;
case IOPRIO_WHO_PGRP:
if (!who)
@@ -241,12 +227,7 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
break;
do_each_thread(g, p) {
- int match;
-
- rcu_read_lock();
- match = __task_cred(p)->uid == user->uid;
- rcu_read_unlock();
- if (!match)
+ if (__task_cred(p)->uid != user->uid)
continue;
tmpio = get_task_ioprio(p);
if (tmpio < 0)
@@ -264,6 +245,6 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
ret = -EINVAL;
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return ret;
}
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 49c844dab33..59e5fe742f7 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -335,7 +335,7 @@ int nilfs_dat_move(struct inode *dat, __u64 vblocknr, sector_t blocknr)
* the device at this point.
*
* To prevent nilfs_dat_translate() from returning the
- * uncommited block number, this makes a copy of the entry
+ * uncommitted block number, this makes a copy of the entry
* buffer and redirects nilfs_dat_translate() to the copy.
*/
if (!buffer_nilfs_redirected(entry_bh)) {
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 3e90f86d5bf..e00d9457c25 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -349,8 +349,8 @@ static int nilfs_ioctl_move_blocks(struct super_block *sb,
ino = vdesc->vd_ino;
cno = vdesc->vd_cno;
inode = nilfs_iget_for_gc(sb, ino, cno);
- if (unlikely(inode == NULL)) {
- ret = -ENOMEM;
+ if (IS_ERR(inode)) {
+ ret = PTR_ERR(inode);
goto failed;
}
do {
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6d87f68ce4b..30f6fad99a5 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -168,6 +168,7 @@ struct mmc_host {
/* DDR mode at 1.8V */
#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */
/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */
mmc_pm_flag_t pm_caps; /* supported pm features */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe93b9c..d369b533dc2 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2441,6 +2441,7 @@
#define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822
#define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823
#define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F
#define PCI_DEVICE_ID_INTEL_I960 0x0960
#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index fa60cbda90a..d79894192ae 100644
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -85,7 +85,9 @@
* ACK_MD (FSI2)
* CKG1 (FSI)
*
- * err: return value < 0
+ * err : return value < 0
+ * no change : return value == 0
+ * change xMD : return value > 0
*
* 0x-00000AB
*
@@ -111,7 +113,7 @@
struct sh_fsi_platform_info {
unsigned long porta_flags;
unsigned long portb_flags;
- int (*set_rate)(int is_porta, int rate); /* for master mode */
+ int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
};
#endif /* __SOUND_FSI_H */
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 507e709f280..4c2404b1b86 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -132,6 +132,8 @@ struct fsi_priv {
struct fsi_stream playback;
struct fsi_stream capture;
+ long rate;
+
u32 mst_ctrl;
};
@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
{
struct fsi_priv *fsi = fsi_get_priv(substream);
int is_play = fsi_is_play(substream);
+ struct fsi_master *master = fsi_get_master(fsi);
+ int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
fsi_irq_disable(fsi, is_play);
fsi_clk_ctrl(fsi, 0);
+ set_rate = master->info->set_rate;
+ if (set_rate && fsi->rate)
+ set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+ fsi->rate = 0;
+
pm_runtime_put_sync(dai->dev);
}
@@ -891,20 +900,20 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
{
struct fsi_priv *fsi = fsi_get_priv(substream);
struct fsi_master *master = fsi_get_master(fsi);
- int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+ int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
int fsi_ver = master->core->ver;
- int is_play = fsi_is_play(substream);
+ long rate = params_rate(params);
int ret;
- /* if slave mode, set_rate is not needed */
- if (!fsi_is_master_mode(fsi, is_play))
+ set_rate = master->info->set_rate;
+ if (!set_rate)
return 0;
- /* it is error if no set_rate */
- if (!set_rate)
- return -EIO;
+ ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+ if (ret < 0) /* error */
+ return ret;
- ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+ fsi->rate = rate;
if (ret > 0) {
u32 data = 0;