path: root/include
diff options
authorLinus Torvalds <torvalds@linux-foundation.org>2009-12-11 15:34:40 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-12-11 15:34:40 -0800
commit0f4974c439dd7826c85bae4e6a8088ce2db0f498 (patch)
treefdabc7d9bb7d7bc49aad547c0aac3a633ce01f09 /include
parent3126c136bc30225d7a43af741778aa50e95e467a (diff)
parent36ba782e9674cdc29ec7003757df0b375e99fa96 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits) tty: split the lock up a bit further tty: Move the leader test in disassociate tty: Push the bkl down a bit in the hangup code tty: Push the lock down further into the ldisc code tty: push the BKL down into the handlers a bit tty: moxa: split open lock tty: moxa: Kill the use of lock_kernel tty: moxa: Fix modem op locking tty: moxa: Kill off the throttle method tty: moxa: Locking clean up tty: moxa: rework the locking a bit tty: moxa: Use more tty_port ops tty: isicom: fix deadlock on shutdown tty: mxser: Use the new locking rules to fix setserial properly tty: mxser: use the tty_port_open method tty: isicom: sort out the board init logic tty: isicom: switch to the new tty_port_open helper tty: tty_port: Add a kref object to the tty port tty: istallion: tty port open/close methods tty: stallion: Convert to the tty_port_open/close methods ...
Diffstat (limited to 'include')
5 files changed, 24 insertions, 120 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5a5385749e1..f72914db2a1 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -214,7 +214,6 @@ unifdef-y += futex.h
unifdef-y += fs.h
unifdef-y += gameport.h
unifdef-y += generic_serial.h
-unifdef-y += hayesesp.h
unifdef-y += hdlcdrv.h
unifdef-y += hdlc.h
unifdef-y += hdreg.h
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
deleted file mode 100644
index 92b08cfe4a7..00000000000
--- a/include/linux/hayesesp.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef HAYESESP_H
-#define HAYESESP_H
-struct hayes_esp_config {
- short flow_on;
- short flow_off;
- short rx_trigger;
- short tx_trigger;
- short pio_threshold;
- unsigned char rx_timeout;
- char dma_channel;
-#ifdef __KERNEL__
-#define ESP_DMA_CHANNEL 0
-#define ESP_RX_TRIGGER 768
-#define ESP_TX_TRIGGER 768
-#define ESP_FLOW_OFF 1016
-#define ESP_FLOW_ON 944
-#define ESP_RX_TMOUT 128
-#define ESP_IN_MAJOR 57 /* major dev # for dial in */
-#define ESP_OUT_MAJOR 58 /* major dev # for dial out */
-#define ESPC_SCALE 3
-#define UART_ESI_BASE 0x00
-#define UART_ESI_SID 0x01
-#define UART_ESI_RX 0x02
-#define UART_ESI_TX 0x02
-#define UART_ESI_CMD1 0x04
-#define UART_ESI_CMD2 0x05
-#define UART_ESI_STAT1 0x04
-#define UART_ESI_STAT2 0x05
-#define UART_ESI_RWS 0x07
-#define UART_IER_DMA_TMOUT 0x80
-#define UART_IER_DMA_TC 0x08
-#define ESI_SET_IRQ 0x04
-#define ESI_SET_DMA_TMOUT 0x05
-#define ESI_SET_SRV_MASK 0x06
-#define ESI_SET_ERR_MASK 0x07
-#define ESI_SET_FLOW_CNTL 0x08
-#define ESI_SET_FLOW_CHARS 0x09
-#define ESI_SET_FLOW_LVL 0x0a
-#define ESI_SET_TRIGGER 0x0b
-#define ESI_SET_RX_TIMEOUT 0x0c
-#define ESI_SET_FLOW_TMOUT 0x0d
-#define ESI_WRITE_UART 0x0e
-#define ESI_READ_UART 0x0f
-#define ESI_SET_MODE 0x10
-#define ESI_GET_ERR_STAT 0x12
-#define ESI_GET_UART_STAT 0x13
-#define ESI_GET_RX_AVAIL 0x14
-#define ESI_GET_TX_AVAIL 0x15
-#define ESI_START_DMA_RX 0x16
-#define ESI_START_DMA_TX 0x17
-#define ESI_ISSUE_BREAK 0x1a
-#define ESI_FLUSH_RX 0x1b
-#define ESI_FLUSH_TX 0x1c
-#define ESI_SET_BAUD 0x1d
-#define ESI_SET_ENH_IRQ 0x1f
-#define ESI_SET_REINTR 0x20
-#define ESI_SET_PRESCALAR 0x23
-#define ESI_NO_COMMAND 0xff
-#define ESP_STAT_RX_TIMEOUT 0x01
-#define ESP_STAT_DMA_RX 0x02
-#define ESP_STAT_DMA_TX 0x04
-#define ESP_STAT_NEVER_DMA 0x08
-#define ESP_STAT_USE_PIO 0x10
-#define ESP_MAGIC 0x53ee
-#define ESP_XMIT_SIZE 4096
-struct esp_struct {
- int magic;
- struct tty_port port;
- spinlock_t lock;
- int io_port;
- int irq;
- int read_status_mask;
- int ignore_status_mask;
- int timeout;
- int stat_flags;
- int custom_divisor;
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- int IER; /* Interrupt Enable Register */
- int MCR; /* Modem control register */
- unsigned long last_active;
- int line;
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- wait_queue_head_t break_wait;
- struct async_icount icount; /* kernel counters for the 4 input interrupts */
- struct hayes_esp_config config; /* port configuration */
- struct esp_struct *next_port; /* For the linked list */
-struct esp_pio_buffer {
- unsigned char data[1024];
- struct esp_pio_buffer *next;
-#endif /* __KERNEL__ */
-#endif /* ESP_H */
diff --git a/include/linux/isicom.h b/include/linux/isicom.h
index bbd42197298..b92e0565063 100644
--- a/include/linux/isicom.h
+++ b/include/linux/isicom.h
@@ -67,6 +67,7 @@
#define FIRMWARE_LOADED 0x0001
#define BOARD_ACTIVE 0x0002
+#define BOARD_INIT 0x0004
/* isi_port status bitmap */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f0f43d08d8b..405a9035fe4 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -190,9 +190,17 @@ struct tty_port_operations {
/* Control the DTR line */
void (*dtr_rts)(struct tty_port *port, int raise);
/* Called when the last close completes or a hangup finishes
- IFF the port was initialized. Do not use to free resources */
+ IFF the port was initialized. Do not use to free resources. Called
+ under the port mutex to serialize against activate/shutdowns */
void (*shutdown)(struct tty_port *port);
void (*drop)(struct tty_port *port);
+ /* Called under the port mutex from tty_port_open, serialized using
+ the port mutex */
+ /* FIXME: long term getting the tty argument *out* of this would be
+ good for consoles */
+ int (*activate)(struct tty_port *port, struct tty_struct *tty);
+ /* Called on the final put of a port */
+ void (*destruct)(struct tty_port *port);
struct tty_port {
@@ -206,12 +214,14 @@ struct tty_port {
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
struct mutex mutex; /* Locking */
+ struct mutex buf_mutex; /* Buffer alloc lock */
unsigned char *xmit_buf; /* Optional buffer */
unsigned int close_delay; /* Close port delay */
unsigned int closing_wait; /* Delay for output */
int drain_delay; /* Set to zero if no pure time
based drain is needed else
set to size of fifo */
+ struct kref kref; /* Ref counter */
@@ -439,7 +449,7 @@ extern void initialize_tty_struct(struct tty_struct *tty,
struct tty_driver *driver, int idx);
extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
int first_ok);
-extern void tty_release_dev(struct file *filp);
+extern int tty_release(struct inode *inode, struct file *filp);
extern int tty_init_termios(struct tty_struct *tty);
extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
@@ -454,6 +464,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
extern void tty_port_init(struct tty_port *port);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern void tty_port_put(struct tty_port *port);
+extern inline struct tty_port *tty_port_get(struct tty_port *port)
+ if (port)
+ kref_get(&port->kref);
+ return port;
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
@@ -467,6 +486,8 @@ extern int tty_port_close_start(struct tty_port *port,
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
extern void tty_port_close(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
+extern int tty_port_open(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp);
extern inline int tty_port_users(struct tty_port *port)
return port->count + port->blocked_open;
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index ce911ebf91e..acf6e457c04 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -39,8 +39,6 @@ enum port_dev_state {
* @serial: pointer back to the struct usb_serial owner of this port.
* @port: pointer to the corresponding tty_port for this port.
* @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- * access for this port.
* @number: the number of the port (the minor number).
* @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
* @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
@@ -77,7 +75,6 @@ struct usb_serial_port {
struct usb_serial *serial;
struct tty_port port;
spinlock_t lock;
- struct mutex mutex;
unsigned char number;
unsigned char *interrupt_in_buffer;