|author||Thierry Vignaud <firstname.lastname@example.org>||2009-02-11 13:31:05 -0800|
|committer||Greg Kroah-Hartman <email@example.com>||2009-03-24 16:20:31 -0700|
usb: kill prehistorical comments about USB_EHCI_HCD
Remove old comments about USB_EHCI_HCD. Cc: Alan Stern <firstname.lastname@example.org> Signed-off-by: Andrew Morton <email@example.com> Acked-by: David Brownell <firstname.lastname@example.org> Signed-off-by: Greg Kroah-Hartman <email@example.com>
Diffstat (limited to 'drivers/usb/host')
1 files changed, 1 insertions, 4 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2c63bfb1f8d..c1cfed7eefb 100644
@@ -24,10 +24,7 @@ config USB_EHCI_HCD
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
If your USB host controller supports USB 2.0, you will likely want to
- configure this Host Controller Driver. At the time of this writing,
- the primary implementation of EHCI is a chip from NEC, widely available
- in add-on PCI cards, but implementations are in the works from other
- vendors including Intel and Philips. Motherboard support is appearing.
+ configure this Host Controller Driver.
EHCI controllers are packaged with "companion" host controllers (OHCI
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports