aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2010-08-16 13:32:24 +0900
committerPaul Mundt <lethal@linux-sh.org>2010-08-16 13:32:24 +0900
commitbbcf6e8b66ab2fb5ddab4d0fe40c2e6a5ebe5301 (patch)
tree071fa9f86dc04a16570be367d04cff3b00c694ad /drivers/serial
parent57682827b9a5edb52e33af0be9082b51bffcd5c7 (diff)
parentda5cabf80e2433131bf0ed8993abc0f7ea618c73 (diff)
downloadmrst-s0i3-test-bbcf6e8b66ab2fb5ddab4d0fe40c2e6a5ebe5301.tar.gz
mrst-s0i3-test-bbcf6e8b66ab2fb5ddab4d0fe40c2e6a5ebe5301.tar.xz
mrst-s0i3-test-bbcf6e8b66ab2fb5ddab4d0fe40c2e6a5ebe5301.zip
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts: arch/sh/include/asm/Kbuild drivers/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/21285.c10
-rw-r--r--drivers/serial/68328serial.c26
-rw-r--r--drivers/serial/68360serial.c10
-rw-r--r--drivers/serial/8250.c59
-rw-r--r--drivers/serial/8250_early.c57
-rw-r--r--drivers/serial/8250_pci.c13
-rw-r--r--drivers/serial/Kconfig56
-rw-r--r--drivers/serial/Makefile4
-rw-r--r--drivers/serial/altera_uart.c2
-rw-r--r--drivers/serial/apbuart.c2
-rw-r--r--drivers/serial/atmel_serial.c11
-rw-r--r--drivers/serial/bfin_5xx.c7
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c6
-rw-r--r--drivers/serial/crisv10.c23
-rw-r--r--drivers/serial/imx.c10
-rw-r--r--drivers/serial/ioc3_serial.c9
-rw-r--r--drivers/serial/ioc4_serial.c9
-rw-r--r--drivers/serial/kgdboc.c18
-rw-r--r--drivers/serial/max3100.c7
-rw-r--r--drivers/serial/max3107-aava.c344
-rw-r--r--drivers/serial/max3107.c1197
-rw-r--r--drivers/serial/max3107.h441
-rw-r--r--drivers/serial/mcf.c31
-rw-r--r--drivers/serial/mfd.c1498
-rw-r--r--drivers/serial/mpc52xx_uart.c153
-rw-r--r--drivers/serial/mrst_max3110.c844
-rw-r--r--drivers/serial/mrst_max3110.h59
-rw-r--r--drivers/serial/nwpserial.c4
-rw-r--r--drivers/serial/of_serial.c6
-rw-r--r--drivers/serial/s5pv210.c8
-rw-r--r--drivers/serial/samsung.c9
-rw-r--r--drivers/serial/serial_core.c288
-rw-r--r--drivers/serial/serial_cs.c68
-rw-r--r--drivers/serial/sh-sci.c42
-rw-r--r--drivers/serial/sh-sci.h29
-rw-r--r--drivers/serial/sn_console.c6
-rw-r--r--drivers/serial/sunhv.c12
-rw-r--r--drivers/serial/sunsab.c14
-rw-r--r--drivers/serial/sunsu.c12
-rw-r--r--drivers/serial/sunzilog.c22
-rw-r--r--drivers/serial/timbuart.c6
-rw-r--r--drivers/serial/uartlite.c5
-rw-r--r--drivers/serial/ucc_uart.c4
43 files changed, 5028 insertions, 413 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 8681f134505..d89aa38c5cf 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
unsigned long flags;
- unsigned int baud, quot, h_lcr;
+ unsigned int baud, quot, h_lcr, b;
/*
* We don't support modem control lines.
@@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
-
- if (port->state && port->state->port.tty) {
- struct tty_struct *tty = port->state->port.tty;
- unsigned int b = port->uartclk / (16 * quot);
- tty_encode_baud_rate(tty, b, b);
- }
+ b = port->uartclk / (16 * quot);
+ tty_termios_encode_baud_rate(termios, b, b);
switch (termios->c_cflag & CSIZE) {
case CS5:
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 30463862603..7356a56ac45 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -78,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0;
#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
-#ifdef CONFIG_CONSOLE
-extern wait_queue_head_t keypress_wait;
-#endif
-
struct tty_driver *serial_driver;
/* number of characters left in xmit buffer before we ask for more */
@@ -102,19 +98,13 @@ static void change_speed(struct m68k_serial *info);
* Setup for console. Argument comes from the boot command line.
*/
-#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#else
- /* (es) */
- /* note: this is messy, but it works, again, perhaps defined somewhere else?*/
- #ifdef CONFIG_M68VZ328
- #define CONSOLE_BAUD_RATE 19200
- #define DEFAULT_CBAUD B19200
- #endif
- /* (/es) */
+/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
+#ifdef CONFIG_M68VZ328
+#define CONSOLE_BAUD_RATE 19200
+#define DEFAULT_CBAUD B19200
#endif
+
#ifndef CONSOLE_BAUD_RATE
#define CONSOLE_BAUD_RATE 9600
#define DEFAULT_CBAUD B9600
@@ -300,10 +290,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
return;
#endif /* CONFIG_MAGIC_SYSRQ */
}
- /* It is a 'keyboard interrupt' ;-) */
-#ifdef CONFIG_CONSOLE
- wake_up(&keypress_wait);
-#endif
}
if(!tty)
@@ -1243,7 +1229,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd5e4f..0dff3bbddc8 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1705,7 +1705,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
printk("jiff=%lu...", jiffies);
#endif
- lock_kernel();
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
@@ -1734,7 +1733,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
- unlock_kernel();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
@@ -1862,7 +1860,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
@@ -2649,7 +2649,7 @@ static int __init rs_360_init(void)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
@@ -2728,7 +2728,7 @@ static int __init rs_360_init(void)
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
up->mrblr = 1;
@@ -2886,7 +2886,7 @@ int serial_console_setup( struct console *co, char *options)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 891e1dd65f2..24110f6f61e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = {
.fifo_size = 128,
.tx_loadsz = 128,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
},
[PORT_16654] = {
.name = "ST16654",
@@ -300,9 +300,16 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+ [PORT_U6_16550A] = {
+ .name = "U6_16550A",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
-#if defined (CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
@@ -422,7 +429,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
return readl(p->membase + offset);
}
-#ifdef CONFIG_SERIAL_8250_AU1X00
static unsigned int au_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -434,7 +440,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
offset = map_8250_out_reg(p, offset) << p->regshift;
__raw_writel(value, p->membase + offset);
}
-#endif
static unsigned int tsi_serial_in(struct uart_port *p, int offset)
{
@@ -503,12 +508,11 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = mem32_serial_out;
break;
-#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
break;
-#endif
+
case UPIO_TSI:
p->serial_in = tsi_serial_in;
p->serial_out = tsi_serial_out;
@@ -535,9 +539,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
switch (p->iotype) {
case UPIO_MEM:
case UPIO_MEM32:
-#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
-#endif
case UPIO_DWAPB:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
@@ -573,7 +575,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value)
serial_outp(up, UART_DLM, value >> 8 & 0xff);
}
-#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
/* Au1x00 haven't got a standard divisor latch */
static int serial_dl_read(struct uart_8250_port *up)
{
@@ -1075,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up)
DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
}
serial_outp(up, UART_IER, iersave);
+
+ /*
+ * We distinguish between 16550A and U6 16550A by counting
+ * how many bytes are in the FIFO.
+ */
+ if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+ up->port.type = PORT_U6_16550A;
+ up->capabilities |= UART_CAP_AFE;
+ }
}
/*
@@ -2229,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
return quot;
}
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
@@ -2407,16 +2418,22 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
}
+EXPORT_SYMBOL(serial8250_do_set_termios);
static void
-serial8250_set_ldisc(struct uart_port *port)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
- int line = port->line;
-
- if (line >= port->state->port.tty->driver->num)
- return;
+ if (port->set_termios)
+ port->set_termios(port, termios, old);
+ else
+ serial8250_do_set_termios(port, termios, old);
+}
- if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+static void
+serial8250_set_ldisc(struct uart_port *port, int new)
+{
+ if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
serial8250_enable_ms(port);
} else
@@ -2596,11 +2613,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
-#ifdef CONFIG_SERIAL_8250_AU1X00
/* if access method is AU, it is a 16550 with a quirk */
if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
up->bugs |= UART_BUG_NOMSR;
-#endif
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
@@ -2994,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.type = p->type;
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
+ port.set_termios = p->set_termios;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
@@ -3157,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port)
uart->port.serial_in = port->serial_in;
if (port->serial_out)
uart->port.serial_out = port->serial_out;
+ /* Possibly override set_termios call */
+ if (port->set_termios)
+ uart->port.set_termios = port->set_termios;
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index f279745e9fe..b745792ec25 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -19,9 +19,11 @@
* The user can specify the device directly, e.g.,
* earlycon=uart8250,io,0x3f8,9600n8
* earlycon=uart8250,mmio,0xff5e0000,115200n8
+ * earlycon=uart8250,mmio32,0xff5e0000,115200n8
* or
* console=uart8250,io,0x3f8,9600n8
* console=uart8250,mmio,0xff5e0000,115200n8
+ * console=uart8250,mmio32,0xff5e0000,115200n8
*/
#include <linux/tty.h>
@@ -48,18 +50,31 @@ static struct early_serial8250_device early_device;
static unsigned int __init serial_in(struct uart_port *port, int offset)
{
- if (port->iotype == UPIO_MEM)
+ switch (port->iotype) {
+ case UPIO_MEM:
return readb(port->membase + offset);
- else
+ case UPIO_MEM32:
+ return readl(port->membase + (offset << 2));
+ case UPIO_PORT:
return inb(port->iobase + offset);
+ default:
+ return 0;
+ }
}
static void __init serial_out(struct uart_port *port, int offset, int value)
{
- if (port->iotype == UPIO_MEM)
+ switch (port->iotype) {
+ case UPIO_MEM:
writeb(value, port->membase + offset);
- else
+ break;
+ case UPIO_MEM32:
+ writel(value, port->membase + (offset << 2));
+ break;
+ case UPIO_PORT:
outb(value, port->iobase + offset);
+ break;
+ }
}
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -137,15 +152,21 @@ static int __init parse_options(struct early_serial8250_device *device,
char *options)
{
struct uart_port *port = &device->port;
- int mmio, length;
+ int mmio, mmio32, length;
if (!options)
return -ENODEV;
port->uartclk = BASE_BAUD * 16;
- if (!strncmp(options, "mmio,", 5)) {
- port->iotype = UPIO_MEM;
- port->mapbase = simple_strtoul(options + 5, &options, 0);
+
+ mmio = !strncmp(options, "mmio,", 5);
+ mmio32 = !strncmp(options, "mmio32,", 7);
+ if (mmio || mmio32) {
+ port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+ port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
+ &options, 0);
+ if (mmio32)
+ port->regshift = 2;
#ifdef CONFIG_FIX_EARLYCON_MEM
set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
port->mapbase & PAGE_MASK);
@@ -157,11 +178,10 @@ static int __init parse_options(struct early_serial8250_device *device,
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
__func__,
- (unsigned long long)port->mapbase);
+ (unsigned long long) port->mapbase);
return -ENOMEM;
}
#endif
- mmio = 1;
} else if (!strncmp(options, "io,", 3)) {
port->iotype = UPIO_PORT;
port->iobase = simple_strtoul(options + 3, &options, 0);
@@ -181,11 +201,18 @@ static int __init parse_options(struct early_serial8250_device *device,
device->baud);
}
- printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
- mmio ? "MMIO" : "I/O port",
- mmio ? (unsigned long long) port->mapbase
- : (unsigned long long) port->iobase,
- device->options);
+ if (mmio || mmio32)
+ printk(KERN_INFO
+ "Early serial console at MMIO%s 0x%llu (options '%s')\n",
+ mmio32 ? "32" : "",
+ (unsigned long long)port->mapbase,
+ device->options);
+ else
+ printk(KERN_INFO
+ "Early serial console at I/O port 0x%lu (options '%s')\n",
+ port->iobase,
+ device->options);
+
return 0;
}
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 746a44621d9..53be4d35a0a 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_TITAN_800E 0xA014
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1542,6 +1543,8 @@ enum pci_board_num_t {
pbn_b2_4_921600,
pbn_b2_8_921600,
+ pbn_b2_8_1152000,
+
pbn_b2_bt_1_115200,
pbn_b2_bt_2_115200,
pbn_b2_bt_4_115200,
@@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.uart_offset = 8,
},
+ [pbn_b2_8_1152000] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
+
[pbn_b2_bt_1_115200] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 1,
@@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+ PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+ pbn_b2_8_1152000 },
/*
* Oxford Semiconductor Inc. Tornado PCI express device range.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8b23165bc5d..12900f7083b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -258,14 +258,6 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
-config SERIAL_8250_AU1X00
- bool "Au1x00 serial port support"
- depends on SERIAL_8250 != n && SOC_AU1X00
- help
- If you have an Au1x00 SOC based board and want to use the serial port,
- say Y to this option. The driver can handle up to 4 serial ports,
- depending on the SOC. If unsure, say N.
-
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000
@@ -544,12 +536,13 @@ config SERIAL_S3C6400
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
- select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+ select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
default y
help
Serial port support for Samsung's S5P Family of SoC's
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
@@ -557,6 +550,22 @@ config SERIAL_MAX3100
help
MAX3100 chip support
+config SERIAL_MAX3107
+ tristate "MAX3107 support"
+ depends on SPI
+ select SERIAL_CORE
+ help
+ MAX3107 chip support
+
+config SERIAL_MAX3107_AAVA
+ tristate "MAX3107 AAVA platform support"
+ depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
+ select SERIAL_CORE
+ help
+ Support for the MAX3107 chip configuration found on the AAVA
+ platform. Includes the extra initialisation and GPIO support
+ neded for this device.
+
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT
@@ -698,6 +707,33 @@ config SERIAL_SA1100_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_MRST_MAX3110
+ tristate "SPI UART driver for Max3110"
+ depends on SPI_DW_PCI
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ This is the UART protocol driver for the MAX3110 device on
+ the Intel Moorestown platform. On other systems use the max3100
+ driver.
+
+config MRST_MAX3110_IRQ
+ boolean "Enable GPIO IRQ for Max3110 over Moorestown"
+ default n
+ depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
+ help
+ This has to be enabled after Moorestown GPIO driver is loaded
+
+config SERIAL_MFD_HSU
+ tristate "Medfield High Speed UART support"
+ depends on PCI
+ select SERIAL_CORE
+
+config SERIAL_MFD_HSU_CONSOLE
+ boolean "Medfile HSU serial console support"
+ depends on SERIAL_MFD_HSU=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_BFIN
tristate "Blackfin serial port support"
depends on BLACKFIN
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 208a85572c3..1ca4fd599ff 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -46,6 +46,8 @@ obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
+obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
@@ -84,3 +86,5 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
+obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index 0f1189605d2..f8d8a00554d 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -394,7 +394,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
static void altera_uart_console_putc(struct uart_port *port, const char c)
{
while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK))
+ ALTERA_UART_STATUS_TRDY_MSK))
cpu_relax();
writel(c, port->membase + ALTERA_UART_TXDATA_REG);
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index 0099b8692b6..cc01c650a14 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -551,7 +551,7 @@ static struct uart_driver grlib_apbuart_driver = {
/* OF Platform Driver */
/* ======================================================================== */
-static int __devinit apbuart_probe(struct of_device *op,
+static int __devinit apbuart_probe(struct platform_device *op,
const struct of_device_id *match)
{
int i = -1;
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index a182def7007..3892666b5fb 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -217,7 +217,8 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+ if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -292,7 +293,9 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port,
+ atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -1211,7 +1214,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port,
+ atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 511cbf68787..a9eff2b18ea 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -957,15 +957,12 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_serial_set_ldisc(struct uart_port *port)
+static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
{
int line = port->line;
unsigned short val;
- if (line >= port->state->port.tty->driver->num)
- return;
-
- switch (port->state->port.tty->termios->c_line) {
+ switch (ld) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cd6cf575902..f2b8adcc6c9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -852,7 +852,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
*/
cpm_set_smc_fcr(up);
- /* Using idle charater time requires some additional tuning. */
+ /* Using idle character time requires some additional tuning. */
out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
out_be16(&up->smc_brklen, 0);
@@ -1340,7 +1340,7 @@ static struct uart_driver cpm_reg = {
static int probe_index;
-static int __devinit cpm_uart_probe(struct of_device *ofdev,
+static int __devinit cpm_uart_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
int index = probe_index++;
@@ -1364,7 +1364,7 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev,
return uart_add_one_port(&cpm_reg, &pinfo->port);
}
-static int __devexit cpm_uart_remove(struct of_device *ofdev)
+static int __devexit cpm_uart_remove(struct platform_device *ofdev)
{
struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
return uart_remove_one_port(&cpm_reg, &pinfo->port);
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 31f172397af..c856905bb3b 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3724,6 +3724,17 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
return e100_enable_rs485(tty, &rs485data);
}
+ case TIOCGRS485:
+ {
+ struct serial_rs485 *rs485data =
+ &(((struct e100_serial *)tty->driver_data)->rs485);
+ /* This is the ioctl to get RS485 data from user-space */
+ if (copy_to_user((struct serial_rs485 *) arg,
+ rs485data,
+ sizeof(serial_rs485)))
+ return -EFAULT;
+ break;
+ }
case TIOCSERWRRS485:
{
@@ -3924,7 +3935,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
* Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
* R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
*/
- lock_kernel();
orig_jiffies = jiffies;
while (info->xmit.head != info->xmit.tail || /* More in send queue */
(*info->ostatusadr & 0x007f) || /* more in FIFO */
@@ -3941,7 +3951,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
curr_time_usec - info->last_tx_active_usec;
}
set_current_state(TASK_RUNNING);
- unlock_kernel();
}
/*
@@ -3981,7 +3990,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
+ wait_event_interruptible_tty(info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
@@ -4057,7 +4066,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
@@ -4139,7 +4150,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
+ wait_event_interruptible_tty(info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4522,8 +4533,8 @@ static int __init rs_init(void)
INIT_WORK(&info->work, do_softint);
if (info->enabled) {
- printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
- serial_driver->name, info->line, (unsigned int)info->ioport);
+ printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
+ serial_driver->name, info->line, info->ioport);
}
}
#ifdef CONFIG_ETRAX_FAST_TIMER
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index eacb588a934..66ecc7ab6da 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -909,13 +909,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
rational_best_approximation(16 * div * baud, sport->port.uartclk,
1 << 16, 1 << 16, &num, &denom);
- if (port->state && port->state->port.tty) {
- tdiv64 = sport->port.uartclk;
- tdiv64 *= num;
- do_div(tdiv64, denom * 16 * div);
- tty_encode_baud_rate(sport->port.state->port.tty,
+ tdiv64 = sport->port.uartclk;
+ tdiv64 *= num;
+ do_div(tdiv64, denom * 16 * div);
+ tty_termios_encode_baud_rate(termios,
(speed_t)tdiv64, (speed_t)tdiv64);
- }
num -= 1;
denom -= 1;
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index f164ba4eba0..93de907b120 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -954,12 +954,13 @@ ioc3_change_speed(struct uart_port *the_port,
struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc3_port *port = get_ioc3_port(the_port);
- unsigned int cflag;
+ unsigned int cflag, iflag;
int baud;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
switch (cflag & CSIZE) {
case CS5:
@@ -1000,12 +1001,12 @@ ioc3_change_speed(struct uart_port *the_port,
state->port.tty->low_latency = 1;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(state->port.tty)) {
+ if (iflag & IGNBRK) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 8ad28fc6492..fcfe82653ac 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1685,11 +1685,12 @@ ioc4_change_speed(struct uart_port *the_port,
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);
int baud, bits;
- unsigned cflag;
+ unsigned cflag, iflag;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
switch (cflag & CSIZE) {
case CS5:
@@ -1741,12 +1742,12 @@ ioc4_change_speed(struct uart_port *the_port,
state->port.tty->low_latency = 1;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(state->port.tty)) {
+ if (iflag & IGNBRK) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index a9a94ae7234..39f9a1adaa7 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -17,6 +17,7 @@
#include <linux/kdb.h>
#include <linux/tty.h>
#include <linux/console.h>
+#include <linux/vt_kern.h>
#define MAX_CONFIG_LEN 40
@@ -31,6 +32,7 @@ static struct kparam_string kps = {
.maxlen = MAX_CONFIG_LEN,
};
+static int kgdboc_use_kms; /* 1 if we use kernel mode switching */
static struct tty_driver *kgdb_tty_driver;
static int kgdb_tty_line;
@@ -104,6 +106,12 @@ static int configure_kgdboc(void)
kgdboc_io_ops.is_console = 0;
kgdb_tty_driver = NULL;
+ kgdboc_use_kms = 0;
+ if (strncmp(cptr, "kms,", 4) == 0) {
+ cptr += 4;
+ kgdboc_use_kms = 1;
+ }
+
if (kgdboc_register_kbd(&cptr))
goto do_register;
@@ -201,8 +209,14 @@ static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
return configure_kgdboc();
}
+static int dbg_restore_graphics;
+
static void kgdboc_pre_exp_handler(void)
{
+ if (!dbg_restore_graphics && kgdboc_use_kms) {
+ dbg_restore_graphics = 1;
+ con_debug_enter(vc_cons[fg_console].d);
+ }
/* Increment the module count when the debugger is active */
if (!kgdb_connected)
try_module_get(THIS_MODULE);
@@ -213,6 +227,10 @@ static void kgdboc_post_exp_handler(void)
/* decrement the module count when the debugger detaches */
if (!kgdb_connected)
module_put(THIS_MODULE);
+ if (kgdboc_use_kms && dbg_restore_graphics) {
+ dbg_restore_graphics = 0;
+ con_debug_leave();
+ }
}
static struct kgdb_io kgdboc_io_ops = {
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 3351c3bd59e..beb1afa27d8 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -430,17 +430,14 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
int baud = 0;
unsigned cflag;
u32 param_new, param_mask, parity = 0;
- struct tty_struct *tty = s->port.state->port.tty;
dev_dbg(&s->spi->dev, "%s\n", __func__);
- if (!tty)
- return;
cflag = termios->c_cflag;
param_new = 0;
param_mask = 0;
- baud = tty_get_baud_rate(tty);
+ baud = tty_termios_baud_rate(termios);
param_new = s->conf & MAX3100_BAUD;
switch (baud) {
case 300:
@@ -485,7 +482,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
default:
baud = s->baud;
}
- tty_encode_baud_rate(tty, baud, baud);
+ tty_termios_encode_baud_rate(termios, baud, baud);
s->baud = baud;
param_mask |= MAX3100_BAUD;
diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c
new file mode 100644
index 00000000000..a1fe304f2f5
--- /dev/null
+++ b/drivers/serial/max3107-aava.c
@@ -0,0 +1,344 @@
+/*
+ * max3107.c - spi uart protocol driver for Maxim 3107
+ * Based on max3100.c
+ * by Christian Pellegrin <chripell@evolware.org>
+ * and max3110.c
+ * by Feng Tang <feng.tang@intel.com>
+ *
+ * Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+#include <asm/mrst.h>
+#include "max3107.h"
+
+/* GPIO direction to input function */
+static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration register */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to input */
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO direction to output function */
+static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration and data registers */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ buf[1] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to output */
+ buf[0] |= (0x0001 << offset);
+ /* Set value */
+ if (value)
+ buf[1] |= (0x0001 << offset);
+ else
+ buf[1] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration and data register values */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO conf data w failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO value query function */
+static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO data register */
+ buf[0] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Return value */
+ return buf[0] & (0x0001 << offset);
+}
+
+/* GPIO value set function */
+static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return;
+ }
+
+ /* Read current GPIO configuration registers*/
+ buf[0] = MAX3107_GPIODATA_REG;
+ buf[1] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO data and config read failed\n");
+ return;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ if (!(buf[1] & (0x0001 << offset))) {
+ /* Configured as input, can't set value */
+ dev_warn(&s->spi->dev,
+ "Trying to set value for input GPIO\n");
+ return;
+ }
+
+ /* Set value */
+ if (value)
+ buf[0] |= (0x0001 << offset);
+ else
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO data register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
+}
+
+/* GPIO chip data */
+static struct gpio_chip max3107_gpio_chip = {
+ .owner = THIS_MODULE,
+ .direction_input = max3107_gpio_direction_in,
+ .direction_output = max3107_gpio_direction_out,
+ .get = max3107_gpio_get,
+ .set = max3107_gpio_set,
+ .can_sleep = 1,
+ .base = MAX3107_GPIO_BASE,
+ .ngpio = MAX3107_GPIO_COUNT,
+};
+
+/**
+ * max3107_aava_reset - reset on AAVA systems
+ * @spi: The SPI device we are probing
+ *
+ * Reset the device ready for probing.
+ */
+
+static int max3107_aava_reset(struct spi_device *spi)
+{
+ /* Reset the chip */
+ if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
+ pr_err("Requesting RESET GPIO failed\n");
+ return -EIO;
+ }
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
+ pr_err("Setting RESET GPIO to 0 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ msleep(MAX3107_RESET_DELAY);
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
+ pr_err("Setting RESET GPIO to 1 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ gpio_free(MAX3107_RESET_GPIO);
+ msleep(MAX3107_WAKEUP_DELAY);
+ return 0;
+}
+
+static int max3107_aava_configure(struct max3107_port *s)
+{
+ int retval;
+
+ /* Initialize GPIO chip data */
+ s->chip = max3107_gpio_chip;
+ s->chip.label = s->spi->modalias;
+ s->chip.dev = &s->spi->dev;
+
+ /* Add GPIO chip */
+ retval = gpiochip_add(&s->chip);
+ if (retval) {
+ dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
+ return retval;
+ }
+
+ /* Temporary fix for EV2 boot problems, set modem reset to 0 */
+ max3107_gpio_direction_out(&s->chip, 3, 0);
+ return 0;
+}
+
+#if 0
+/* This will get enabled once we have the board stuff merged for this
+ specific case */
+
+static const struct baud_table brg13_ext[] = {
+ { 300, MAX3107_BRG13_B300 },
+ { 600, MAX3107_BRG13_B600 },
+ { 1200, MAX3107_BRG13_B1200 },
+ { 2400, MAX3107_BRG13_B2400 },
+ { 4800, MAX3107_BRG13_B4800 },
+ { 9600, MAX3107_BRG13_B9600 },
+ { 19200, MAX3107_BRG13_B19200 },
+ { 57600, MAX3107_BRG13_B57600 },
+ { 115200, MAX3107_BRG13_B115200 },
+ { 230400, MAX3107_BRG13_B230400 },
+ { 460800, MAX3107_BRG13_B460800 },
+ { 921600, MAX3107_BRG13_B921600 },
+ { 0, 0 }
+};
+
+static void max3107_aava_init(struct max3107_port *s)
+{
+ /*override for AAVA SC specific*/
+ if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
+ if (get_koski_build_id() <= KOSKI_EV2)
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG13_B9600;
+ s->baud_tbl = (struct baud_table *)brg13_ext;
+ }
+ }
+}
+#endif
+
+static int __devexit max3107_aava_remove(struct spi_device *spi)
+{
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ /* Remove GPIO chip */
+ if (gpiochip_remove(&s->chip))
+ dev_warn(&spi->dev, "Removing GPIO chip failed\n");
+
+ /* Then do the default remove */
+ return max3107_remove(spi);
+}
+
+/* Platform data */
+static struct max3107_plat aava_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+/* .init = max3107_aava_init, */
+ .configure = max3107_aava_configure,
+ .hw_suspend = max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
+};
+
+
+static int __devinit max3107_probe_aava(struct spi_device *spi)
+{
+ int err = max3107_aava_reset(spi);
+ if (err < 0)
+ return err;
+ return max3107_probe(spi, &aava_plat_data);
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+ .driver = {
+ .name = "aava-max3107",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = max3107_probe_aava,
+ .remove = __devexit_p(max3107_aava_remove),
+ .suspend = max3107_suspend,
+ .resume = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+ return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+ spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("aava-max3107-spi");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c
new file mode 100644
index 00000000000..67283c1a57f
--- /dev/null
+++ b/drivers/serial/max3107.c
@@ -0,0 +1,1197 @@
+/*
+ * max3107.c - spi uart protocol driver for Maxim 3107
+ * Based on max3100.c
+ * by Christian Pellegrin <chripell@evolware.org>
+ * and max3110.c
+ * by Feng Tang <feng.tang@intel.com>
+ *
+ * Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include "max3107.h"
+
+static const struct baud_table brg26_ext[] = {
+ { 300, MAX3107_BRG26_B300 },
+ { 600, MAX3107_BRG26_B600 },
+ { 1200, MAX3107_BRG26_B1200 },
+ { 2400, MAX3107_BRG26_B2400 },
+ { 4800, MAX3107_BRG26_B4800 },
+ { 9600, MAX3107_BRG26_B9600 },
+ { 19200, MAX3107_BRG26_B19200 },
+ { 57600, MAX3107_BRG26_B57600 },
+ { 115200, MAX3107_BRG26_B115200 },
+ { 230400, MAX3107_BRG26_B230400 },
+ { 460800, MAX3107_BRG26_B460800 },
+ { 921600, MAX3107_BRG26_B921600 },
+ { 0, 0 }
+};
+
+static const struct baud_table brg13_int[] = {
+ { 300, MAX3107_BRG13_IB300 },
+ { 600, MAX3107_BRG13_IB600 },
+ { 1200, MAX3107_BRG13_IB1200 },
+ { 2400, MAX3107_BRG13_IB2400 },
+ { 4800, MAX3107_BRG13_IB4800 },
+ { 9600, MAX3107_BRG13_IB9600 },
+ { 19200, MAX3107_BRG13_IB19200 },
+ { 57600, MAX3107_BRG13_IB57600 },
+ { 115200, MAX3107_BRG13_IB115200 },
+ { 230400, MAX3107_BRG13_IB230400 },
+ { 460800, MAX3107_BRG13_IB460800 },
+ { 921600, MAX3107_BRG13_IB921600 },
+ { 0, 0 }
+};
+
+static u32 get_new_brg(int baud, struct max3107_port *s)
+{
+ int i;
+ const struct baud_table *baud_tbl = s->baud_tbl;
+
+ for (i = 0; i < 13; i++) {
+ if (baud == baud_tbl[i].baud)
+ return baud_tbl[i].new_brg;
+ }
+
+ return 0;
+}
+
+/* Perform SPI transfer for write/read of device register(s) */
+int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
+{
+ struct spi_message spi_msg;
+ struct spi_transfer spi_xfer;
+
+ /* Initialize SPI ,message */
+ spi_message_init(&spi_msg);
+
+ /* Initialize SPI transfer */
+ memset(&spi_xfer, 0, sizeof spi_xfer);
+ spi_xfer.len = len;
+ spi_xfer.tx_buf = tx;
+ spi_xfer.rx_buf = rx;
+ spi_xfer.speed_hz = MAX3107_SPI_SPEED;
+
+ /* Add SPI transfer to SPI message */
+ spi_message_add_tail(&spi_xfer, &spi_msg);
+
+#ifdef DBG_TRACE_SPI_DATA
+ {
+ int i;
+ pr_info("tx len %d:\n", spi_xfer.len);
+ for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
+ pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]);
+ pr_info("\n");
+ }
+#endif
+
+ /* Perform synchronous SPI transfer */
+ if (spi_sync(s->spi, &spi_msg)) {
+ dev_err(&s->spi->dev, "spi_sync failure\n");
+ return -EIO;
+ }
+
+#ifdef DBG_TRACE_SPI_DATA
+ if (spi_xfer.rx_buf) {
+ int i;
+ pr_info("rx len %d:\n", spi_xfer.len);
+ for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
+ pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]);
+ pr_info("\n");
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_rw);
+
+/* Puts received data to circular buffer */
+static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
+ int len)
+{
+ struct uart_port *port = &s->port;
+ struct tty_struct *tty;
+
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return;
+
+ /* Insert received data */
+ tty_insert_flip_string(tty, data, len);
+ /* Update RX counter */
+ port->icount.rx += len;
+}
+
+/* Handle data receiving */
+static void max3107_handlerx(struct max3107_port *s, u16 rxlvl)
+{
+ int i;
+ int j;
+ int len; /* SPI transfer buffer length */
+ u16 *buf;
+ u8 *valid_str;
+
+ if (!s->rx_enabled)
+ /* RX is disabled */
+ return;
+
+ if (rxlvl == 0) {
+ /* RX fifo is empty */
+ return;
+ } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) {
+ dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl);
+ /* Ensure sanity of RX level */
+ rxlvl = MAX3107_RX_FIFO_SIZE;
+ }
+ if ((s->rxbuf == 0) || (s->rxstr == 0)) {
+ dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n");
+ return;
+ }
+ buf = s->rxbuf;
+ valid_str = s->rxstr;
+ while (rxlvl) {
+ pr_debug("rxlvl %d\n", rxlvl);
+ /* Clear buffer */
+ memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2));
+ len = 0;
+ if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) {
+ /* First disable RX FIFO interrupt */
+ pr_debug("Disabling RX INT\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT;
+ buf[0] |= s->irqen_reg;
+ len++;
+ }
+ /* Just increase the length by amount of words in FIFO since
+ * buffer was zeroed and SPI transfer of 0x0000 means reading
+ * from RX FIFO
+ */
+ len += rxlvl;
+ /* Append RX level query */
+ buf[len] = MAX3107_RXFIFOLVL_REG;
+ len++;
+
+ /* Perform the SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) {
+ dev_err(&s->spi->dev, "SPI transfer for RX h failed\n");
+ return;
+ }
+
+ /* Skip RX FIFO interrupt disabling word if it was added */
+ j = ((len - 1) - rxlvl);
+ /* Read received words */
+ for (i = 0; i < rxlvl; i++, j++)
+ valid_str[i] = (u8)buf[j];
+ put_data_to_circ_buf(s, valid_str, rxlvl);
+ /* Get new RX level */
+ rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK);
+ }
+
+ if (s->rx_enabled) {
+ /* RX still enabled, re-enable RX FIFO interrupt */
+ pr_debug("Enabling RX INT\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
+ buf[0] |= s->irqen_reg;
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n");
+ }
+
+ /* Push the received data to receivers */
+ if (s->port.state->port.tty)
+ tty_flip_buffer_push(s->port.state->port.tty);
+}
+
+
+/* Handle data sending */
+static void max3107_handletx(struct max3107_port *s)
+{
+ struct circ_buf *xmit = &s->port.state->xmit;
+ int i;
+ unsigned long flags;
+ int len; /* SPI transfer buffer length */
+ u16 *buf;
+
+ if (!s->tx_fifo_empty)
+ /* Don't send more data before previous data is sent */
+ return;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
+ /* No data to send or TX is stopped */
+ return;
+
+ if (!s->txbuf) {
+ dev_warn(&s->spi->dev, "Txbuf isn't ready\n");
+ return;
+ }
+ buf = s->txbuf;
+ /* Get length of data pending in circular buffer */
+ len = uart_circ_chars_pending(xmit);
+ if (len) {
+ /* Limit to size of TX FIFO */
+ if (len > MAX3107_TX_FIFO_SIZE)
+ len = MAX3107_TX_FIFO_SIZE;
+
+ pr_debug("txlen %d\n", len);
+
+ /* Update TX counter */
+ s->port.icount.tx += len;
+
+ /* TX FIFO will no longer be empty */
+ s->tx_fifo_empty = 0;
+
+ i = 0;
+ if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) {
+ /* First disable TX empty interrupt */
+ pr_debug("Disabling TE INT\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT;
+ buf[i] |= s->irqen_reg;
+ i++;
+ len++;
+ }
+ /* Add data to send */
+ spin_lock_irqsave(&s->port.lock, flags);
+ for ( ; i < len ; i++) {
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG);
+ buf[i] |= ((u16)xmit->buf[xmit->tail] &
+ MAX3107_SPI_TX_DATA_MASK);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ }
+ spin_unlock_irqrestore(&s->port.lock, flags);
+ if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) {
+ /* Enable TX empty interrupt */
+ pr_debug("Enabling TE INT\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT;
+ buf[i] |= s->irqen_reg;
+ i++;
+ len++;
+ }
+ if (!s->tx_enabled) {
+ /* Enable TX */
+ pr_debug("Enable TX\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT;
+ buf[i] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ s->tx_enabled = 1;
+ i++;
+ len++;
+ }
+
+ /* Perform the SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, len*2)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer TX handling failed\n");
+ return;
+ }
+ }
+
+ /* Indicate wake up if circular buffer is getting low on data */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+
+}
+
+/* Handle interrupts
+ * Also reads and returns current RX FIFO level
+ */
+static u16 handle_interrupt(struct max3107_port *s)
+{
+ u16 buf[4]; /* Buffer for SPI transfers */
+ u8 irq_status;
+ u16 rx_level;
+ unsigned long flags;
+
+ /* Read IRQ status register */
+ buf[0] = MAX3107_IRQSTS_REG;
+ /* Read status IRQ status register */
+ buf[1] = MAX3107_STS_IRQSTS_REG;
+ /* Read LSR IRQ status register */
+ buf[2] = MAX3107_LSR_IRQSTS_REG;
+ /* Query RX level */
+ buf[3] = MAX3107_RXFIFOLVL_REG;
+
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for INTR handling failed\n");
+ return 0;
+ }
+
+ irq_status = (u8)buf[0];
+ pr_debug("IRQSTS %x\n", irq_status);
+ rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK);
+
+ if (irq_status & MAX3107_IRQ_LSR_BIT) {
+ /* LSR interrupt */
+ if (buf[2] & MAX3107_LSR_RXTO_BIT)
+ /* RX timeout interrupt,
+ * handled by normal RX handling
+ */
+ pr_debug("RX TO INT\n");
+ }
+
+ if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) {
+ /* Tx empty interrupt,
+ * disable TX and set tx_fifo_empty flag
+ */
+ pr_debug("TE INT, disabling TX\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
+ buf[0] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer TX dis failed\n");
+ s->tx_enabled = 0;
+ s->tx_fifo_empty = 1;
+ }
+
+ if (irq_status & MAX3107_IRQ_RXFIFO_BIT)
+ /* RX FIFO interrupt,
+ * handled by normal RX handling
+ */
+ pr_debug("RFIFO INT\n");
+
+ /* Return RX level */
+ return rx_level;
+}
+
+/* Trigger work thread*/
+static void max3107_dowork(struct max3107_port *s)
+{
+ if (!work_pending(&s->work) && !freezing(current) && !s->suspended)
+ queue_work(s->workqueue, &s->work);
+ else
+ dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n");
+}
+
+/* Work thread */
+static void max3107_work(struct work_struct *w)
+{
+ struct max3107_port *s = container_of(w, struct max3107_port, work);
+ u16 rxlvl = 0;
+ int len; /* SPI transfer buffer length */
+ u16 buf[5]; /* Buffer for SPI transfers */
+ unsigned long flags;
+
+ /* Start by reading current RX FIFO level */
+ buf[0] = MAX3107_RXFIFOLVL_REG;
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer RX lev failed\n");
+ rxlvl = 0;
+ } else {
+ rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK);
+ }
+
+ do {
+ pr_debug("rxlvl %d\n", rxlvl);
+
+ /* Handle RX */
+ max3107_handlerx(s, rxlvl);
+ rxlvl = 0;
+
+ if (s->handle_irq) {
+ /* Handle pending interrupts
+ * We also get new RX FIFO level since new data may
+ * have been received while pushing received data to
+ * receivers
+ */
+ s->handle_irq = 0;
+ rxlvl = handle_interrupt(s);
+ }
+
+ /* Handle TX */
+ max3107_handletx(s);
+
+ /* Handle configuration changes */
+ len = 0;
+ spin_lock_irqsave(&s->data_lock, flags);
+ if (s->mode1_commit) {
+ pr_debug("mode1_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ buf[len++] |= s->mode1_reg;
+ s->mode1_commit = 0;
+ }
+ if (s->lcr_commit) {
+ pr_debug("lcr_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG);
+ buf[len++] |= s->lcr_reg;
+ s->lcr_commit = 0;
+ }
+ if (s->brg_commit) {
+ pr_debug("brg_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG);
+ buf[len++] |= ((s->brg_cfg >> 16) &
+ MAX3107_SPI_TX_DATA_MASK);
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG);
+ buf[len++] |= ((s->brg_cfg >> 8) &
+ MAX3107_SPI_TX_DATA_MASK);
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG);
+ buf[len++] |= ((s->brg_cfg) & 0xff);
+ s->brg_commit = 0;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ if (len > 0) {
+ if (max3107_rw(s, (u8 *)buf, NULL, len * 2))
+ dev_err(&s->spi->dev,
+ "SPI transfer config failed\n");
+ }
+
+ /* Reloop if interrupt handling indicated data in RX FIFO */
+ } while (rxlvl);
+
+}
+
+/* Set sleep mode */
+static void max3107_set_sleep(struct max3107_port *s, int mode)
+{
+ u16 buf[1]; /* Buffer for SPI transfer */
+ unsigned long flags;
+ pr_debug("enter, mode %d\n", mode);
+
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ switch (mode) {
+ case MAX3107_DISABLE_FORCED_SLEEP:
+ s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT;
+ break;
+ case MAX3107_ENABLE_FORCED_SLEEP:
+ s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT;
+ break;
+ case MAX3107_DISABLE_AUTOSLEEP:
+ s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT;
+ break;
+ case MAX3107_ENABLE_AUTOSLEEP:
+ s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT;
+ break;
+ default:
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ dev_warn(&s->spi->dev, "invalid sleep mode\n");
+ return;
+ }
+ buf[0] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n");
+
+ if (mode == MAX3107_DISABLE_AUTOSLEEP ||
+ mode == MAX3107_DISABLE_FORCED_SLEEP)
+ msleep(MAX3107_WAKEUP_DELAY);
+}
+
+/* Perform full register initialization */
+static void max3107_register_init(struct max3107_port *s)
+{
+ u16 buf[11]; /* Buffer for SPI transfers */
+
+ /* 1. Configure baud rate, 9600 as default */
+ s->baud = 9600;
+ /* the below is default*/
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG26_B9600;
+ s->baud_tbl = (struct baud_table *)brg26_ext;
+ } else {
+ s->brg_cfg = MAX3107_BRG13_IB9600;
+ s->baud_tbl = (struct baud_table *)brg13_int;
+ }
+
+ if (s->pdata->init)
+ s->pdata->init(s);
+
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
+ | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
+ | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK);
+ buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG)
+ | ((s->brg_cfg) & 0xff);
+
+ /* 2. Configure LCR register, 8N1 mode by default */
+ s->lcr_reg = MAX3107_LCR_WORD_LEN_8;
+ buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG)
+ | s->lcr_reg;
+
+ /* 3. Configure MODE 1 register */
+ s->mode1_reg = 0;
+ /* Enable IRQ pin */
+ s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT;
+ /* Disable TX */
+ s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
+ s->tx_enabled = 0;
+ /* RX is enabled */
+ s->rx_enabled = 1;
+ buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG)
+ | s->mode1_reg;
+
+ /* 4. Configure MODE 2 register */
+ buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
+ if (s->loopback) {
+ /* Enable loopback */
+ buf[5] |= MAX3107_MODE2_LOOPBACK_BIT;
+ }
+ /* Reset FIFOs */
+ buf[5] |= MAX3107_MODE2_FIFORST_BIT;
+ s->tx_fifo_empty = 1;
+
+ /* 5. Configure FIFO trigger level register */
+ buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG);
+ /* RX FIFO trigger for 16 words, TX FIFO trigger not used */
+ buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0));
+
+ /* 6. Configure flow control levels */
+ buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG);
+ /* Flow control halt level 96, resume level 48 */
+ buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96));
+
+ /* 7. Configure flow control */
+ buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG);
+ /* Enable auto CTS and auto RTS flow control */
+ buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT);
+
+ /* 8. Configure RX timeout register */
+ buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG);
+ /* Timeout after 48 character intervals */
+ buf[9] |= 0x0030;
+
+ /* 9. Configure LSR interrupt enable register */
+ buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG);
+ /* Enable RX timeout interrupt */
+ buf[10] |= MAX3107_LSR_RXTO_BIT;
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 22))
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+
+ /* 10. Clear IRQ status register by reading it */
+ buf[0] = MAX3107_IRQSTS_REG;
+
+ /* 11. Configure interrupt enable register */
+ /* Enable LSR interrupt */
+ s->irqen_reg = MAX3107_IRQ_LSR_BIT;
+ /* Enable RX FIFO interrupt */
+ s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG)
+ | s->irqen_reg;
+
+ /* 12. Clear FIFO reset that was set in step 6 */
+ buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
+ if (s->loopback) {
+ /* Keep loopback enabled */
+ buf[2] |= MAX3107_MODE2_LOOPBACK_BIT;
+ }
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6))
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+
+}
+
+/* IRQ handler */
+static irqreturn_t max3107_irq(int irqno, void *dev_id)
+{
+ struct max3107_port *s = dev_id;
+
+ if (irqno != s->spi->irq) {
+ /* Unexpected IRQ */
+ return IRQ_NONE;
+ }
+
+ /* Indicate irq */
+ s->handle_irq = 1;
+
+ /* Trigger work thread */
+ max3107_dowork(s);
+
+ return IRQ_HANDLED;
+}
+
+/* HW suspension function
+ *
+ * Currently autosleep is used to decrease current consumption, alternative
+ * approach would be to set the chip to reset mode if UART is not being
+ * used but that would mess the GPIOs
+ *
+ */
+void max3107_hw_susp(struct max3107_port *s, int suspend)
+{
+ pr_debug("enter, suspend %d\n", suspend);
+
+ if (suspend) {
+ /* Suspend requested,
+ * enable autosleep to decrease current consumption
+ */
+ s->suspended = 1;
+ max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP);
+ } else {
+ /* Resume requested,
+ * disable autosleep
+ */
+ s->suspended = 0;
+ max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
+ }
+}
+EXPORT_SYMBOL_GPL(max3107_hw_susp);
+
+/* Modem status IRQ enabling */
+static void max3107_enable_ms(struct uart_port *port)
+{
+ /* Modem status not supported */
+}
+
+/* Data send function */
+static void max3107_start_tx(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Trigger work thread for sending data */
+ max3107_dowork(s);
+}
+
+/* Function for checking that there is no pending transfers */
+static unsigned int max3107_tx_empty(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ pr_debug("returning %d\n",
+ (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit)));
+ return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit);
+}
+
+/* Function for stopping RX */
+static void max3107_stop_rx(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ unsigned long flags;
+
+ /* Set RX disabled in MODE 1 register */
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT;
+ s->mode1_commit = 1;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ /* Set RX disabled */
+ s->rx_enabled = 0;
+ /* Trigger work thread for doing the actual configuration change */
+ max3107_dowork(s);
+}
+
+/* Function for returning control pin states */
+static unsigned int max3107_get_mctrl(struct uart_port *port)
+{
+ /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ * so just indicate DSR and CAR asserted
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+/* Function for setting control pin states */
+static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
+ * so do nothing
+ */
+}
+
+/* Function for configuring UART parameters */
+static void max3107_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ struct tty_struct *tty;
+ int baud;
+ u16 new_lcr = 0;
+ u32 new_brg = 0;
+ unsigned long flags;
+
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return;
+
+ /* Get new LCR register values */
+ /* Word size */
+ if ((termios->c_cflag & CSIZE) == CS7)
+ new_lcr |= MAX3107_LCR_WORD_LEN_7;
+ else
+ new_lcr |= MAX3107_LCR_WORD_LEN_8;
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ new_lcr |= MAX3107_LCR_PARITY_BIT;
+ if (!(termios->c_cflag & PARODD))
+ new_lcr |= MAX3107_LCR_EVENPARITY_BIT;
+ }
+
+ /* Stop bits */
+ if (termios->c_cflag & CSTOPB) {
+ /* 2 stop bits */
+ new_lcr |= MAX3107_LCR_STOPLEN_BIT;
+ }
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+
+ /* Set status ignore mask */
+ s->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ s->port.ignore_status_mask |= MAX3107_ALL_ERRORS;
+
+ /* Set low latency to immediately handle pushed data */
+ s->port.state->port.tty->low_latency = 1;
+
+ /* Get new baud rate generator configuration */
+ baud = tty_get_baud_rate(tty);
+
+ spin_lock_irqsave(&s->data_lock, flags);
+ new_brg = get_new_brg(baud, s);
+ /* if can't find the corrent config, use previous */
+ if (!new_brg) {
+ baud = s->baud;
+ new_brg = s->brg_cfg;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ s->baud = baud;
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_lock_irqsave(&s->data_lock, flags);
+ if (s->lcr_reg != new_lcr) {
+ s->lcr_reg = new_lcr;
+ s->lcr_commit = 1;
+ }
+ if (s->brg_cfg != new_brg) {
+ s->brg_cfg = new_brg;
+ s->brg_commit = 1;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ /* Trigger work thread for doing the actual configuration change */
+ max3107_dowork(s);
+}
+
+/* Port shutdown function */
+static void max3107_shutdown(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ if (s->suspended && s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
+
+ /* Free the interrupt */
+ free_irq(s->spi->irq, s);
+
+ if (s->workqueue) {
+ /* Flush and destroy work queue */
+ flush_workqueue(s->workqueue);
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ }
+
+ /* Suspend HW */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 1);
+}
+
+/* Port startup function */
+static int max3107_startup(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Initialize work queue */
+ s->workqueue = create_freezeable_workqueue("max3107");
+ if (!s->workqueue) {
+ dev_err(&s->spi->dev, "Workqueue creation failed\n");
+ return -EBUSY;
+ }
+ INIT_WORK(&s->work, max3107_work);
+
+ /* Setup IRQ */
+ if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
+ "max3107", s)) {
+ dev_err(&s->spi->dev, "IRQ reguest failed\n");
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ return -EBUSY;
+ }
+
+ /* Resume HW */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
+
+ /* Init registers */
+ max3107_register_init(s);
+
+ return 0;
+}
+
+/* Port type function */
+static const char *max3107_type(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ return s->spi->modalias;
+}
+
+/* Port release function */
+static void max3107_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+/* Port request function */
+static int max3107_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+/* Port config function */
+static void max3107_config_port(struct uart_port *port, int flags)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ s->port.type = PORT_MAX3107;
+}
+
+/* Port verify function */
+static int max3107_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107)
+ return 0;
+
+ return -EINVAL;
+}
+
+/* Port stop TX function */
+static void max3107_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+/* Port break control function */
+static void max3107_break_ctl(struct uart_port *port, int break_state)
+{
+ /* We don't support break control, do nothing */
+}
+
+
+/* Port functions */
+static struct uart_ops max3107_ops = {
+ .tx_empty = max3107_tx_empty,
+ .set_mctrl = max3107_set_mctrl,
+ .get_mctrl = max3107_get_mctrl,
+ .stop_tx = max3107_stop_tx,
+ .start_tx = max3107_start_tx,
+ .stop_rx = max3107_stop_rx,
+ .enable_ms = max3107_enable_ms,
+ .break_ctl = max3107_break_ctl,
+ .startup = max3107_startup,
+ .shutdown = max3107_shutdown,
+ .set_termios = max3107_set_termios,
+ .type = max3107_type,
+ .release_port = max3107_release_port,
+ .request_port = max3107_request_port,
+ .config_port = max3107_config_port,
+ .verify_port = max3107_verify_port,
+};
+
+/* UART driver data */
+static struct uart_driver max3107_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyMAX",
+ .dev_name = "ttyMAX",
+ .nr = 1,
+};
+
+static int driver_registered = 0;
+
+
+
+/* 'Generic' platform data */
+static struct max3107_plat generic_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+ .hw_suspend = max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
+};
+
+
+/*******************************************************************/
+
+/**
+ * max3107_probe - SPI bus probe entry point
+ * @spi: the spi device
+ *
+ * SPI wants us to probe this device and if appropriate claim it.
+ * Perform any platform specific requirements and then initialise
+ * the device.
+ */
+
+int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
+{
+ struct max3107_port *s;
+ u16 buf[2]; /* Buffer for SPI transfers */
+ int retval;
+
+ pr_info("enter max3107 probe\n");
+
+ /* Allocate port structure */
+ s = kzalloc(sizeof(*s), GFP_KERNEL);
+ if (!s) {
+ pr_err("Allocating port structure failed\n");
+ return -ENOMEM;
+ }
+
+ s->pdata = pdata;
+
+ /* SPI Rx buffer
+ * +2 for RX FIFO interrupt
+ * disabling and RX level query
+ */
+ s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
+ if (!s->rxbuf) {
+ pr_err("Allocating RX buffer failed\n");
+ return -ENOMEM;
+ }
+ s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
+ if (!s->rxstr) {
+ pr_err("Allocating RX buffer failed\n");
+ return -ENOMEM;
+ }
+ /* SPI Tx buffer
+ * SPI transfer buffer
+ * +3 for TX FIFO empty
+ * interrupt disabling and
+ * enabling and TX enabling
+ */
+ s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
+ if (!s->txbuf) {
+ pr_err("Allocating TX buffer failed\n");
+ return -ENOMEM;
+ }
+ /* Initialize shared data lock */
+ spin_lock_init(&s->data_lock);
+
+ /* SPI intializations */
+ dev_set_drvdata(&spi->dev, s);
+ spi->mode = SPI_MODE_0;
+ spi->dev.platform_data = pdata;
+ spi->bits_per_word = 16;
+ s->ext_clk = pdata->ext_clk;
+ s->loopback = pdata->loopback;
+ spi_setup(spi);
+ s->spi = spi;
+
+ /* Check REV ID to ensure we are talking to what we expect */
+ buf[0] = MAX3107_REVID_REG;
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
+ return -EIO;
+ }
+ if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
+ (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
+ dev_err(&s->spi->dev, "REVID %x does not match\n",
+ (buf[0] & MAX3107_SPI_RX_DATA_MASK));
+ return -ENODEV;
+ }
+
+ /* Disable all interrupts */
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000);
+ buf[0] |= 0x0000;
+
+ /* Configure clock source */
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG);
+ if (s->ext_clk) {
+ /* External clock */
+ buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT;
+ }
+
+ /* PLL bypass ON */
+ buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT;
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+ return -EIO;
+ }
+
+ /* Register UART driver */
+ if (!driver_registered) {
+ retval = uart_register_driver(&max3107_uart_driver);
+ if (retval) {
+ dev_err(&s->spi->dev, "Registering UART driver failed\n");
+ return retval;
+ }
+ driver_registered = 1;
+ }
+
+ /* Initialize UART port data */
+ s->port.fifosize = 128;
+ s->port.ops = &max3107_ops;
+ s->port.line = 0;
+ s->port.dev = &spi->dev;
+ s->port.uartclk = 9600;
+ s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ s->port.irq = s->spi->irq;
+ s->port.type = PORT_MAX3107;
+
+ /* Add UART port */
+ retval = uart_add_one_port(&max3107_uart_driver, &s->port);
+ if (retval < 0) {
+ dev_err(&s->spi->dev, "Adding UART port failed\n");
+ return retval;
+ }
+
+ if (pdata->configure) {
+ retval = pdata->configure(s);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Go to suspend mode */
+ if (pdata->hw_suspend)
+ pdata->hw_suspend(s, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_probe);
+
+/* Driver remove function */
+int max3107_remove(struct spi_device *spi)
+{
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_info("enter max3107 remove\n");
+
+ /* Remove port */
+ if (uart_remove_one_port(&max3107_uart_driver, &s->port))
+ dev_warn(&s->spi->dev, "Removing UART port failed\n");
+
+
+ /* Free TxRx buffer */
+ kfree(s->rxbuf);
+ kfree(s->rxstr);
+ kfree(s->txbuf);
+
+ /* Free port structure */
+ kfree(s);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_remove);
+
+/* Driver suspend function */
+int max3107_suspend(struct spi_device *spi, pm_message_t state)
+{
+#ifdef CONFIG_PM
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_debug("enter suspend\n");
+
+ /* Suspend UART port */
+ uart_suspend_port(&max3107_uart_driver, &s->port);
+
+ /* Go to suspend mode */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 1);
+#endif /* CONFIG_PM */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_suspend);
+
+/* Driver resume function */
+int max3107_resume(struct spi_device *spi)
+{
+#ifdef CONFIG_PM
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_debug("enter resume\n");
+
+ /* Resume from suspend */
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
+
+ /* Resume UART port */
+ uart_resume_port(&max3107_uart_driver, &s->port);
+#endif /* CONFIG_PM */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max3107_resume);
+
+static int max3107_probe_generic(struct spi_device *spi)
+{
+ return max3107_probe(spi, &generic_plat_data);
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+ .driver = {
+ .name = "max3107",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = max3107_probe_generic,
+ .remove = __devexit_p(max3107_remove),
+ .suspend = max3107_suspend,
+ .resume = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+ pr_info("enter max3107 init\n");
+ return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+ pr_info("enter max3107 exit\n");
+ /* Unregister UART driver */
+ if (driver_registered)
+ uart_unregister_driver(&max3107_uart_driver);
+ spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("max3107-spi");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h
new file mode 100644
index 00000000000..7ab63239250
--- /dev/null
+++ b/drivers/serial/max3107.h
@@ -0,0 +1,441 @@
+/*
+ * max3107.h - spi uart protocol driver header for Maxim 3107
+ *
+ * Copyright (C) Aavamobile 2009
+ * Based on serial_max3100.h by Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _MAX3107_H
+#define _MAX3107_H
+
+/* Serial error status definitions */
+#define MAX3107_PARITY_ERROR 1
+#define MAX3107_FRAME_ERROR 2
+#define MAX3107_OVERRUN_ERROR 4
+#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \
+ MAX3107_FRAME_ERROR | \
+ MAX3107_OVERRUN_ERROR)
+
+/* GPIO definitions */
+#define MAX3107_GPIO_BASE 88
+#define MAX3107_GPIO_COUNT 4
+
+
+/* GPIO connected to chip's reset pin */
+#define MAX3107_RESET_GPIO 87
+
+
+/* Chip reset delay */
+#define MAX3107_RESET_DELAY 10
+
+/* Chip wakeup delay */
+#define MAX3107_WAKEUP_DELAY 50
+
+
+/* Sleep mode definitions */
+#define MAX3107_DISABLE_FORCED_SLEEP 0
+#define MAX3107_ENABLE_FORCED_SLEEP 1
+#define MAX3107_DISABLE_AUTOSLEEP 2
+#define MAX3107_ENABLE_AUTOSLEEP 3
+
+
+/* Definitions for register access with SPI transfers
+ *
+ * SPI transfer format:
+ *
+ * Master to slave bits xzzzzzzzyyyyyyyy
+ * Slave to master bits aaaaaaaabbbbbbbb
+ *
+ * where:
+ * x = 0 for reads, 1 for writes
+ * z = register address
+ * y = new register value if write, 0 if read
+ * a = unspecified
+ * b = register value if read, unspecified if write
+ */
+
+/* SPI speed */
+#define MAX3107_SPI_SPEED (3125000 * 2)
+
+/* Write bit */
+#define MAX3107_WRITE_BIT (1 << 15)
+
+/* SPI TX data mask */
+#define MAX3107_SPI_RX_DATA_MASK (0x00ff)
+
+/* SPI RX data mask */
+#define MAX3107_SPI_TX_DATA_MASK (0x00ff)
+
+/* Register access masks */
+#define MAX3107_RHR_REG (0x0000) /* RX FIFO */
+#define MAX3107_THR_REG (0x0000) /* TX FIFO */
+#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */
+#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */
+#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */
+#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */
+#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */
+#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */
+#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */
+#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */
+#define MAX3107_MODE1_REG (0x0900) /* MODE1 */
+#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */
+#define MAX3107_LCR_REG (0x0b00) /* LCR */
+#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */
+#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */
+#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */
+#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */
+#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */
+#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */
+#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */
+#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */
+#define MAX3107_XON1_REG (0x1400) /* XON1 character */
+#define MAX3107_XON2_REG (0x1500) /* XON2 character */
+#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */
+#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */
+#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */
+#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */
+#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */
+#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */
+#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */
+#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */
+#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */
+#define MAX3107_REVID_REG (0x1f00) /* Revision identification */
+
+/* IRQ register bits */
+#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
+#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
+#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */
+#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
+#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
+#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
+#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
+#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
+
+/* LSR register bits */
+#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */
+#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
+#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
+#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */
+#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */
+#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
+#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */
+
+/* Special character register bits */
+#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
+#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
+#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
+#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
+#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */
+#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
+#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Status register bits */
+#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
+#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
+#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
+#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
+#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */
+#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
+#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
+#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* MODE1 register bits */
+#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
+#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
+#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
+#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
+#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
+#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
+#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
+#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
+
+/* MODE2 register bits */
+#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */
+#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
+#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
+#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
+#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
+#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
+#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
+#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
+
+/* LCR register bits */
+#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
+#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
+ *
+ * Word length bits table:
+ * 00 -> 5 bit words
+ * 01 -> 6 bit words
+ * 10 -> 7 bit words
+ * 11 -> 8 bit words
+ */
+#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
+ *
+ * STOP length bit table:
+ * 0 -> 1 stop bit
+ * 1 -> 1-1.5 stop bits if
+ * word length is 5,
+ * 2 stop bits otherwise
+ */
+#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
+#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
+#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
+#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
+#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */
+#define MAX3107_LCR_WORD_LEN_5 (0x0000)
+#define MAX3107_LCR_WORD_LEN_6 (0x0001)
+#define MAX3107_LCR_WORD_LEN_7 (0x0002)
+#define MAX3107_LCR_WORD_LEN_8 (0x0003)
+
+
+/* IRDA register bits */
+#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
+#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
+#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
+#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
+#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
+#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
+#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Flow control trigger level register masks */
+#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
+#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
+#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f)
+#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4)
+
+/* FIFO interrupt trigger level register masks */
+#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */
+#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */
+#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f)
+#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4)
+
+/* Flow control register bits */
+#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
+#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
+#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
+ * are used in conjunction with
+ * XOFF2 for definition of
+ * special character */
+#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
+#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
+#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
+ *
+ * SWFLOW bits 1 & 0 table:
+ * 00 -> no transmitter flow
+ * control
+ * 01 -> receiver compares
+ * XON2 and XOFF2
+ * and controls
+ * transmitter
+ * 10 -> receiver compares
+ * XON1 and XOFF1
+ * and controls
+ * transmitter
+ * 11 -> receiver compares
+ * XON1, XON2, XOFF1 and
+ * XOFF2 and controls
+ * transmitter
+ */
+#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
+#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no received flow
+ * control
+ * 01 -> transmitter generates
+ * XON2 and XOFF2
+ * 10 -> transmitter generates
+ * XON1 and XOFF1
+ * 11 -> transmitter generates
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+
+/* GPIO configuration register bits */
+#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
+#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
+#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
+#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
+#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
+#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
+#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
+#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
+
+/* GPIO DATA register bits */
+#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
+#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
+#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
+#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
+#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
+#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
+#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
+#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
+
+/* PLL configuration register masks */
+#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */
+#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */
+
+/* Baud rate generator configuration register masks and bits */
+#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of
+ * Baud rate generator divisor
+ */
+#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
+#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
+#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Clock source register bits */
+#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */
+#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
+#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
+#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
+#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
+#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */
+#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
+
+
+/* HW definitions */
+#define MAX3107_RX_FIFO_SIZE 128
+#define MAX3107_TX_FIFO_SIZE 128
+#define MAX3107_REVID1 0x00a0
+#define MAX3107_REVID2 0x00a1
+
+
+/* Baud rate generator configuration values for external clock 13MHz */
+#define MAX3107_BRG13_B300 (0x0A9400 | 0x05)
+#define MAX3107_BRG13_B600 (0x054A00 | 0x03)
+#define MAX3107_BRG13_B1200 (0x02A500 | 0x01)
+#define MAX3107_BRG13_B2400 (0x015200 | 0x09)
+#define MAX3107_BRG13_B4800 (0x00A900 | 0x04)
+#define MAX3107_BRG13_B9600 (0x005400 | 0x0A)
+#define MAX3107_BRG13_B19200 (0x002A00 | 0x05)
+#define MAX3107_BRG13_B38400 (0x001500 | 0x03)
+#define MAX3107_BRG13_B57600 (0x000E00 | 0x02)
+#define MAX3107_BRG13_B115200 (0x000700 | 0x01)
+#define MAX3107_BRG13_B230400 (0x000300 | 0x08)
+#define MAX3107_BRG13_B460800 (0x000100 | 0x0c)
+#define MAX3107_BRG13_B921600 (0x000100 | 0x1c)
+
+/* Baud rate generator configuration values for external clock 26MHz */
+#define MAX3107_BRG26_B300 (0x152800 | 0x0A)
+#define MAX3107_BRG26_B600 (0x0A9400 | 0x05)
+#define MAX3107_BRG26_B1200 (0x054A00 | 0x03)
+#define MAX3107_BRG26_B2400 (0x02A500 | 0x01)
+#define MAX3107_BRG26_B4800 (0x015200 | 0x09)
+#define MAX3107_BRG26_B9600 (0x00A900 | 0x04)
+#define MAX3107_BRG26_B19200 (0x005400 | 0x0A)
+#define MAX3107_BRG26_B38400 (0x002A00 | 0x05)
+#define MAX3107_BRG26_B57600 (0x001C00 | 0x03)
+#define MAX3107_BRG26_B115200 (0x000E00 | 0x02)
+#define MAX3107_BRG26_B230400 (0x000700 | 0x01)
+#define MAX3107_BRG26_B460800 (0x000300 | 0x08)
+#define MAX3107_BRG26_B921600 (0x000100 | 0x0C)
+
+/* Baud rate generator configuration values for internal clock */
+#define MAX3107_BRG13_IB300 (0x008000 | 0x00)
+#define MAX3107_BRG13_IB600 (0x004000 | 0x00)
+#define MAX3107_BRG13_IB1200 (0x002000 | 0x00)
+#define MAX3107_BRG13_IB2400 (0x001000 | 0x00)
+#define MAX3107_BRG13_IB4800 (0x000800 | 0x00)
+#define MAX3107_BRG13_IB9600 (0x000400 | 0x00)
+#define MAX3107_BRG13_IB19200 (0x000200 | 0x00)
+#define MAX3107_BRG13_IB38400 (0x000100 | 0x00)
+#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B)
+#define MAX3107_BRG13_IB115200 (0x000000 | 0x05)
+#define MAX3107_BRG13_IB230400 (0x000000 | 0x03)
+#define MAX3107_BRG13_IB460800 (0x000000 | 0x00)
+#define MAX3107_BRG13_IB921600 (0x000000 | 0x00)
+
+
+struct baud_table {
+ int baud;
+ u32 new_brg;
+};
+
+struct max3107_port {
+ /* UART port structure */
+ struct uart_port port;
+
+ /* SPI device structure */
+ struct spi_device *spi;
+
+#if defined(CONFIG_GPIOLIB)
+ /* GPIO chip stucture */
+ struct gpio_chip chip;
+#endif
+
+ /* Workqueue that does all the magic */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ /* Lock for shared data */
+ spinlock_t data_lock;
+
+ /* Device configuration */
+ int ext_clk; /* 1 if external clock used */
+ int loopback; /* Current loopback mode state */
+ int baud; /* Current baud rate */
+
+ /* State flags */
+ int suspended; /* Indicates suspend mode */
+ int tx_fifo_empty; /* Flag for TX FIFO state */
+ int rx_enabled; /* Flag for receiver state */
+ int tx_enabled; /* Flag for transmitter state */
+
+ u16 irqen_reg; /* Current IRQ enable register value */
+ /* Shared data */
+ u16 mode1_reg; /* Current mode1 register value*/
+ int mode1_commit; /* Flag for setting new mode1 register value */
+ u16 lcr_reg; /* Current LCR register value */
+ int lcr_commit; /* Flag for setting new LCR register value */
+ u32 brg_cfg; /* Current Baud rate generator config */
+ int brg_commit; /* Flag for setting new baud rate generator
+ * config
+ */
+ struct baud_table *baud_tbl;
+ int handle_irq; /* Indicates that IRQ should be handled */
+
+ /* Rx buffer and str*/
+ u16 *rxbuf;
+ u8 *rxstr;
+ /* Tx buffer*/
+ u16 *txbuf;
+
+ struct max3107_plat *pdata; /* Platform data */
+};
+
+/* Platform data structure */
+struct max3107_plat {
+ /* Loopback mode enable */
+ int loopback;
+ /* External clock enable */
+ int ext_clk;
+ /* Called during the register initialisation */
+ void (*init)(struct max3107_port *s);
+ /* Called when the port is found and configured */
+ int (*configure)(struct max3107_port *s);
+ /* HW suspend function */
+ void (*hw_suspend) (struct max3107_port *s, int suspend);
+ /* Polling mode enable */
+ int polled_mode;
+ /* Polling period if polling mode enabled */
+ int poll_time;
+};
+
+extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len);
+extern void max3107_hw_susp(struct max3107_port *s, int suspend);
+extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata);
+extern int max3107_remove(struct spi_device *spi);
+extern int max3107_suspend(struct spi_device *spi, pm_message_t state);
+extern int max3107_resume(struct spi_device *spi);
+
+#endif /* _LINUX_SERIAL_MAX3107_H */
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b5aaef965f2..3394b7cc172 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -70,16 +70,14 @@ static unsigned int mcf_tx_empty(struct uart_port *port)
static unsigned int mcf_get_mctrl(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
unsigned int sigs;
- spin_lock_irqsave(&port->lock, flags);
sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
0 : TIOCM_CTS;
sigs |= (pp->sigs & TIOCM_RTS);
sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
- spin_unlock_irqrestore(&port->lock, flags);
+
return sigs;
}
@@ -88,16 +86,13 @@ static unsigned int mcf_get_mctrl(struct uart_port *port)
static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->sigs = sigs;
mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
if (sigs & TIOCM_RTS)
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
else
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -105,12 +100,9 @@ static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
static void mcf_start_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr |= MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -118,12 +110,9 @@ static void mcf_start_tx(struct uart_port *port)
static void mcf_stop_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -131,12 +120,9 @@ static void mcf_stop_tx(struct uart_port *port)
static void mcf_stop_rx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_RXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -366,13 +352,22 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
struct uart_port *port = data;
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned int isr;
+ irqreturn_t ret = IRQ_NONE;
isr = readb(port->membase + MCFUART_UISR) & pp->imr;
- if (isr & MCFUART_UIR_RXREADY)
+
+ spin_lock(&port->lock);
+ if (isr & MCFUART_UIR_RXREADY) {
mcf_rx_chars(pp);
- if (isr & MCFUART_UIR_TXREADY)
+ ret = IRQ_HANDLED;
+ }
+ if (isr & MCFUART_UIR_TXREADY) {
mcf_tx_chars(pp);
- return IRQ_HANDLED;
+ ret = IRQ_HANDLED;
+ }
+ spin_unlock(&port->lock);
+
+ return ret;
}
/****************************************************************************/
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
new file mode 100644
index 00000000000..bc9af503907
--- /dev/null
+++ b/drivers/serial/mfd.c
@@ -0,0 +1,1498 @@
+/*
+ * mfd.c: driver for High Speed UART device of Intel Medfield platform
+ *
+ * Refer pxa.c, 8250.c and some other drivers in drivers/serial/
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/* Notes:
+ * 1. DMA channel allocation: 0/1 channel are assigned to port 0,
+ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans
+ * are used for RX, odd chans for TX
+ *
+ * 2. In A0 stepping, UART will not support TX half empty flag
+ *
+ * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * asserted, only when the HW is reset the DDCD and DDSR will
+ * be triggered
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial_mfd.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#define MFD_HSU_A0_STEPPING 1
+
+#define HSU_DMA_BUF_SIZE 2048
+
+#define chan_readl(chan, offset) readl(chan->reg + offset)
+#define chan_writel(chan, offset, val) writel(val, chan->reg + offset)
+
+#define mfd_readl(obj, offset) readl(obj->reg + offset)
+#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset)
+
+#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10)
+
+struct hsu_dma_buffer {
+ u8 *buf;
+ dma_addr_t dma_addr;
+ u32 dma_size;
+ u32 ofs;
+};
+
+struct hsu_dma_chan {
+ u32 id;
+ enum dma_data_direction dirt;
+ struct uart_hsu_port *uport;
+ void __iomem *reg;
+ struct timer_list rx_timer; /* only needed by RX channel */
+};
+
+struct uart_hsu_port {
+ struct uart_port port;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned int lsr_break_flag;
+ char name[12];
+ int index;
+ struct device *dev;
+
+ struct hsu_dma_chan *txc;
+ struct hsu_dma_chan *rxc;
+ struct hsu_dma_buffer txbuf;
+ struct hsu_dma_buffer rxbuf;
+ int use_dma; /* flag for DMA/PIO */
+ int running;
+ int dma_tx_on;
+};
+
+/* Top level data structure of HSU */
+struct hsu_port {
+ void __iomem *reg;
+ unsigned long paddr;
+ unsigned long iolen;
+ u32 irq;
+
+ struct uart_hsu_port port[3];
+ struct hsu_dma_chan chans[10];
+
+ struct dentry *debugfs;
+};
+
+static inline unsigned int serial_in(struct uart_hsu_port *up, int offset)
+{
+ unsigned int val;
+
+ if (offset > UART_MSR) {
+ offset <<= 2;
+ val = readl(up->port.membase + offset);
+ } else
+ val = (unsigned int)readb(up->port.membase + offset);
+
+ return val;
+}
+
+static inline void serial_out(struct uart_hsu_port *up, int offset, int value)
+{
+ if (offset > UART_MSR) {
+ offset <<= 2;
+ writel(value, up->port.membase + offset);
+ } else {
+ unsigned char val = value & 0xff;
+ writeb(val, up->port.membase + offset);
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define HSU_REGS_BUFSIZE 1024
+
+static int hsu_show_regs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t port_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct uart_hsu_port *up = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MFD HSU port[%d] regs:\n", up->index);
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "IER: \t\t0x%08x\n", serial_in(up, UART_IER));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "PS: \t\t0x%08x\n", serial_in(up, UART_PS));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct hsu_dma_chan *chan = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MFD HSU DMA channel [%d] regs:\n", chan->id);
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations port_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = hsu_show_regs_open,
+ .read = port_show_regs,
+};
+
+static const struct file_operations dma_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = hsu_show_regs_open,
+ .read = dma_show_regs,
+};
+
+static int hsu_debugfs_init(struct hsu_port *hsu)
+{
+ int i;
+ char name[32];
+
+ hsu->debugfs = debugfs_create_dir("hsu", NULL);
+ if (!hsu->debugfs)
+ return -ENOMEM;
+
+ for (i = 0; i < 3; i++) {
+ snprintf(name, sizeof(name), "port_%d_regs", i);
+ debugfs_create_file(name, S_IFREG | S_IRUGO,
+ hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops);
+ }
+
+ for (i = 0; i < 6; i++) {
+ snprintf(name, sizeof(name), "dma_chan_%d_regs", i);
+ debugfs_create_file(name, S_IFREG | S_IRUGO,
+ hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops);
+ }
+
+ return 0;
+}
+
+static void hsu_debugfs_remove(struct hsu_port *hsu)
+{
+ if (hsu->debugfs)
+ debugfs_remove_recursive(hsu->debugfs);
+}
+
+#else
+static inline int hsu_debugfs_init(struct hsu_port *hsu)
+{
+ return 0;
+}
+
+static inline void hsu_debugfs_remove(struct hsu_port *hsu)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void serial_hsu_enable_ms(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+void hsu_dma_tx(struct uart_hsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ struct hsu_dma_buffer *dbuf = &up->txbuf;
+ int count;
+
+ /* test_and_set_bit may be better, but anyway it's in lock protected mode */
+ if (up->dma_tx_on)
+ return;
+
+ /* Update the circ buf info */
+ xmit->tail += dbuf->ofs;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ up->port.icount.tx += dbuf->ofs;
+ dbuf->ofs = 0;
+
+ /* Disable the channel */
+ chan_writel(up->txc, HSU_CH_CR, 0x0);
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) {
+ dma_sync_single_for_device(up->port.dev,
+ dbuf->dma_addr,
+ dbuf->dma_size,
+ DMA_TO_DEVICE);
+
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dbuf->ofs = count;
+
+ /* Reprogram the channel */
+ chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail);
+ chan_writel(up->txc, HSU_CH_D0TSR, count);
+
+ /* Reenable the channel */
+ chan_writel(up->txc, HSU_CH_DCR, 0x1
+ | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24));
+ up->dma_tx_on = 1;
+ chan_writel(up->txc, HSU_CH_CR, 0x1);
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+/* The buffer is already cache coherent */
+void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
+{
+ dbuf->ofs = 0;
+
+ chan_writel(rxc, HSU_CH_BSR, 32);
+ chan_writel(rxc, HSU_CH_MOTSR, 4);
+
+ chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr);
+ chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size);
+ chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24) /* timeout bit, see HSU Errata 1 */
+ );
+ chan_writel(rxc, HSU_CH_CR, 0x3);
+
+ mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
+}
+
+/* Protected by spin_lock_irqsave(port->lock) */
+static void serial_hsu_start_tx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ if (up->use_dma) {
+ hsu_dma_tx(up);
+ } else if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial_hsu_stop_tx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct hsu_dma_chan *txc = up->txc;
+
+ if (up->use_dma)
+ chan_writel(txc, HSU_CH_CR, 0x0);
+ else if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+/* This is always called in spinlock protected mode, so
+ * modify timeout timer is safe here */
+void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
+{
+ struct hsu_dma_buffer *dbuf = &up->rxbuf;
+ struct hsu_dma_chan *chan = up->rxc;
+ struct uart_port *port = &up->port;
+ struct tty_struct *tty = port->state->port.tty;
+ int count;
+
+ if (!tty)
+ return;
+
+ /*
+ * First need to know how many is already transferred,
+ * then check if its a timeout DMA irq, and return
+ * the trail bytes out, push them up and reenable the
+ * channel
+ */
+
+ /* Timeout IRQ, need wait some time, see Errata 2 */
+ if (int_sts & 0xf00)
+ udelay(2);
+
+ /* Stop the channel */
+ chan_writel(chan, HSU_CH_CR, 0x0);
+
+ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
+ if (!count) {
+ /* Restart the channel before we leave */
+ chan_writel(chan, HSU_CH_CR, 0x3);
+ return;
+ }
+ del_timer(&chan->rx_timer);
+
+ dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
+ dbuf->dma_size, DMA_FROM_DEVICE);
+
+ /*
+ * Head will only wrap around when we recycle
+ * the DMA buffer, and when that happens, we
+ * explicitly set tail to 0. So head will
+ * always be greater than tail.
+ */
+ tty_insert_flip_string(tty, dbuf->buf, count);
+ port->icount.rx += count;
+
+ dma_sync_single_for_device(up->port.dev, dbuf->dma_addr,
+ dbuf->dma_size, DMA_FROM_DEVICE);
+
+ /* Reprogram the channel */
+ chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr);
+ chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size);
+ chan_writel(chan, HSU_CH_DCR, 0x1
+ | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24) /* timeout bit, see HSU Errata 1 */
+ );
+ tty_flip_buffer_push(tty);
+
+ chan_writel(chan, HSU_CH_CR, 0x3);
+ chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
+ add_timer(&chan->rx_timer);
+
+}
+
+static void serial_hsu_stop_rx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct hsu_dma_chan *chan = up->rxc;
+
+ if (up->use_dma)
+ chan_writel(chan, HSU_CH_CR, 0x2);
+ else {
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static inline void receive_chars(struct uart_hsu_port *up, int *status)
+{
+ struct tty_struct *tty = up->port.state->port.tty;
+ unsigned int ch, flag;
+ unsigned int max_count = 256;
+
+ if (!tty)
+ return;
+
+ do {
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+
+ dev_warn(up->dev, "We really rush into ERR/BI case"
+ "status = 0x%02x", *status);
+ /* For statistics only */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /* Mask off conditions which should be ignored. */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+ if (up->port.cons &&
+ up->port.cons->index == up->port.line) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && max_count--);
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_hsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_out(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_hsu_stop_tx(&up->port);
+ return;
+ }
+
+#ifndef MFD_HSU_A0_STEPPING
+ count = up->port.fifosize / 2;
+#else
+ /*
+ * A0 only supports fully empty IRQ, and the first char written
+ * into it won't clear the EMPT bit, so we may need be cautious
+ * by useing a shorter buffer
+ */
+ count = up->port.fifosize - 4;
+#endif
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ serial_hsu_stop_tx(&up->port);
+}
+
+static inline void check_modem_status(struct uart_hsu_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ /* We may only get DDCD when HW init and reset */
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ /* Will start/stop_tx accordingly */
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static irqreturn_t port_irq(int irq, void *dev_id)
+{
+ struct uart_hsu_port *up = dev_id;
+ unsigned int iir, lsr;
+ unsigned long flags;
+
+ if (unlikely(!up->running))
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->use_dma) {
+ lsr = serial_in(up, UART_LSR);
+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE)))
+ dev_warn(up->dev,
+ "Got lsr irq while using DMA, lsr = 0x%2x\n",
+ lsr);
+ check_modem_status(up);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT) {
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_NONE;
+ }
+
+ lsr = serial_in(up, UART_LSR);
+ if (lsr & UART_LSR_DR)
+ receive_chars(up, &lsr);
+ check_modem_status(up);
+
+ /* lsr will be renewed during the receive_chars */
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_HANDLED;
+}
+
+static inline void dma_chan_irq(struct hsu_dma_chan *chan)
+{
+ struct uart_hsu_port *up = chan->uport;
+ unsigned long flags;
+ u32 int_sts;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (!up->use_dma || !up->running)
+ goto exit;
+
+ /*
+ * No matter what situation, need read clear the IRQ status
+ * There is a bug, see Errata 5, HSD 2900918
+ */
+ int_sts = chan_readl(chan, HSU_CH_SR);
+
+ /* Rx channel */
+ if (chan->dirt == DMA_FROM_DEVICE)
+ hsu_dma_rx(up, int_sts);
+
+ /* Tx channel */
+ if (chan->dirt == DMA_TO_DEVICE) {
+ chan_writel(chan, HSU_CH_CR, 0x0);
+ up->dma_tx_on = 0;
+ hsu_dma_tx(up);
+ }
+
+exit:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return;
+}
+
+static irqreturn_t dma_irq(int irq, void *dev_id)
+{
+ struct hsu_port *hsu = dev_id;
+ u32 int_sts, i;
+
+ int_sts = mfd_readl(hsu, HSU_GBL_DMAISR);
+
+ /* Currently we only have 6 channels may be used */
+ for (i = 0; i < 6; i++) {
+ if (int_sts & 0x1)
+ dma_chan_irq(&hsu->chans[i]);
+ int_sts >>= 1;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial_hsu_tx_empty(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_hsu_get_mctrl(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned char status;
+ unsigned int ret;
+
+ status = serial_in(up, UART_MSR);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr |= up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * What special to do:
+ * 1. chose the 64B fifo mode
+ * 2. make sure not to select half empty mode for A0 stepping
+ * 3. start dma or pio depends on configuration
+ * 4. we only allocate dma memory when needed
+ */
+static int serial_hsu_startup(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+
+ /* Clear the interrupt registers. */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ /* Now, initialize the UART, default is 8n1 */
+ serial_out(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.mctrl |= TIOCM_OUT2;
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ if (!up->use_dma)
+ up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE;
+ else
+ up->ier = 0;
+ serial_out(up, UART_IER, up->ier);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* DMA init */
+ if (up->use_dma) {
+ struct hsu_dma_buffer *dbuf;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ up->dma_tx_on = 0;
+
+ /* First allocate the RX buffer */
+ dbuf = &up->rxbuf;
+ dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL);
+ if (!dbuf->buf) {
+ up->use_dma = 0;
+ goto exit;
+ }
+ dbuf->dma_addr = dma_map_single(port->dev,
+ dbuf->buf,
+ HSU_DMA_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ dbuf->dma_size = HSU_DMA_BUF_SIZE;
+
+ /* Start the RX channel right now */
+ hsu_dma_start_rx_chan(up->rxc, dbuf);
+
+ /* Next init the TX DMA */
+ dbuf = &up->txbuf;
+ dbuf->buf = xmit->buf;
+ dbuf->dma_addr = dma_map_single(port->dev,
+ dbuf->buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dbuf->dma_size = UART_XMIT_SIZE;
+
+ /* This should not be changed all around */
+ chan_writel(up->txc, HSU_CH_BSR, 32);
+ chan_writel(up->txc, HSU_CH_MOTSR, 4);
+ dbuf->ofs = 0;
+ }
+
+exit:
+ /* And clear the interrupt registers again for luck. */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ up->running = 1;
+ return 0;
+}
+
+static void serial_hsu_shutdown(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ del_timer_sync(&up->rxc->rx_timer);
+
+ /* Disable interrupts from this port */
+ up->ier = 0;
+ serial_out(up, UART_IER, 0);
+ up->running = 0;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* Disable break condition and FIFOs */
+ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+}
+
+static void
+serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct tty_struct *tty = port->state->port.tty;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+ u32 mul = 0x3600;
+ u32 ps = 0x10;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ /* CMSPAR isn't supported by this driver */
+ if (tty)
+ tty->termios->c_cflag &= ~CMSPAR;
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ /*
+ * For those basic low baud rate we can get the direct
+ * scalar from 2746800, like 115200 = 2746800/24, for those
+ * higher baud rate, we have to handle them case by case,
+ * but DIV reg is never touched as its default value 0x3d09
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ quot = uart_get_divisor(port, baud);
+
+ switch (baud) {
+ case 3500000:
+ mul = 0x3345;
+ ps = 0xC;
+ quot = 1;
+ break;
+ case 2500000:
+ mul = 0x2710;
+ ps = 0x10;
+ quot = 1;
+ break;
+ case 18432000:
+ mul = 0x2400;
+ ps = 0x10;
+ quot = 1;
+ break;
+ case 1500000:
+ mul = 0x1D4C;
+ ps = 0xc;
+ quot = 1;
+ break;
+ default:
+ ;
+ }
+
+ if ((up->port.uartclk / quot) < (2400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
+ else if ((up->port.uartclk / quot) < (230400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
+
+ fcr |= UART_FCR_HSU_64B_FIFO;
+#ifdef MFD_HSU_A0_STEPPING
+ /* A0 doesn't support half empty IRQ */
+ fcr |= UART_FCR_FULL_EMPT_TXI;
+#endif
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /* Characters to ignore */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts, disable
+ * MSI by default
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE | UART_MCR_RTS;
+ else
+ up->mcr &= ~UART_MCR_AFE;
+
+ serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
+ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_LCR, cval); /* reset DLAB */
+ serial_out(up, UART_MUL, mul); /* set MUL */
+ serial_out(up, UART_PS, ps); /* set PS */
+ up->lcr = cval; /* Save LCR */
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+ serial_out(up, UART_FCR, fcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_hsu_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+}
+
+static void serial_hsu_release_port(struct uart_port *port)
+{
+}
+
+static int serial_hsu_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_hsu_config_port(struct uart_port *port, int flags)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ up->port.type = PORT_MFD;
+}
+
+static int
+serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* We don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+static const char *
+serial_hsu_type(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ return up->name;
+}
+
+/* Mainly for uart console use */
+static struct uart_hsu_port *serial_hsu_ports[3];
+static struct uart_driver serial_hsu_reg;
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/* Wait for transmitter & holding register to empty */
+static inline void wait_for_xmitr(struct uart_hsu_port *up)
+{
+ unsigned int status, tmout = 1000;
+
+ /* Wait up to 1ms for the character to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (!(status & BOTH_EMPTY));
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+static void serial_hsu_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_hsu_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_hsu_port *up = serial_hsu_ports[co->index];
+ unsigned long flags;
+ unsigned int ier;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
+ } else
+ spin_lock(&up->port.lock);
+
+ /* First save the IER then disable the interrupts */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+
+ uart_console_write(&up->port, s, count, serial_hsu_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static struct console serial_hsu_console;
+
+static int __init
+serial_hsu_console_setup(struct console *co, char *options)
+{
+ struct uart_hsu_port *up;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ if (co->index == -1 || co->index >= serial_hsu_reg.nr)
+ co->index = 0;
+ up = serial_hsu_ports[co->index];
+ if (!up)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ ret = uart_set_options(&up->port, co, baud, parity, bits, flow);
+
+ return ret;
+}
+
+static struct console serial_hsu_console = {
+ .name = "ttyMFD",
+ .write = serial_hsu_console_write,
+ .device = uart_console_device,
+ .setup = serial_hsu_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = 2,
+ .data = &serial_hsu_reg,
+};
+#endif
+
+struct uart_ops serial_hsu_pops = {
+ .tx_empty = serial_hsu_tx_empty,
+ .set_mctrl = serial_hsu_set_mctrl,
+ .get_mctrl = serial_hsu_get_mctrl,
+ .stop_tx = serial_hsu_stop_tx,
+ .start_tx = serial_hsu_start_tx,
+ .stop_rx = serial_hsu_stop_rx,
+ .enable_ms = serial_hsu_enable_ms,
+ .break_ctl = serial_hsu_break_ctl,
+ .startup = serial_hsu_startup,
+ .shutdown = serial_hsu_shutdown,
+ .set_termios = serial_hsu_set_termios,
+ .pm = serial_hsu_pm,
+ .type = serial_hsu_type,
+ .release_port = serial_hsu_release_port,
+ .request_port = serial_hsu_request_port,
+ .config_port = serial_hsu_config_port,
+ .verify_port = serial_hsu_verify_port,
+};
+
+static struct uart_driver serial_hsu_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "MFD serial",
+ .dev_name = "ttyMFD",
+ .major = TTY_MAJOR,
+ .minor = 128,
+ .nr = 3,
+};
+
+#ifdef CONFIG_PM
+static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
+
+ /* Make sure this is not the internal dma controller */
+ if (priv && (pdev->device != 0x081E)) {
+ up = priv;
+ uart_suspend_port(&serial_hsu_reg, &up->port);
+ }
+
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int serial_hsu_resume(struct pci_dev *pdev)
+{
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "HSU: can't re-enable device, try to continue\n");
+
+ if (priv && (pdev->device != 0x081E)) {
+ up = priv;
+ uart_resume_port(&serial_hsu_reg, &up->port);
+ }
+ return 0;
+}
+#else
+#define serial_hsu_suspend NULL
+#define serial_hsu_resume NULL
+#endif
+
+/* temp global pointer before we settle down on using one or four PCI dev */
+static struct hsu_port *phsu;
+
+static int serial_hsu_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct uart_hsu_port *uport;
+ int index, ret;
+
+ printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n",
+ pdev->vendor, pdev->device);
+
+ switch (pdev->device) {
+ case 0x081B:
+ index = 0;
+ break;
+ case 0x081C:
+ index = 1;
+ break;
+ case 0x081D:
+ index = 2;
+ break;
+ case 0x081E:
+ /* internal DMA controller */
+ index = 3;
+ break;
+ default:
+ dev_err(&pdev->dev, "HSU: out of index!");
+ return -ENODEV;
+ }
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ if (index == 3) {
+ /* DMA controller */
+ ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto err_disable;
+ }
+ pci_set_drvdata(pdev, phsu);
+ } else {
+ /* UART port 0~2 */
+ uport = &phsu->port[index];
+ uport->port.irq = pdev->irq;
+ uport->port.dev = &pdev->dev;
+ uport->dev = &pdev->dev;
+
+ ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto err_disable;
+ }
+ uart_add_one_port(&serial_hsu_reg, &uport->port);
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+ if (index == 2) {
+ register_console(&serial_hsu_console);
+ uport->port.cons = &serial_hsu_console;
+ }
+#endif
+ pci_set_drvdata(pdev, uport);
+ }
+
+ return 0;
+
+err_disable:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void hsu_dma_rx_timeout(unsigned long data)
+{
+ struct hsu_dma_chan *chan = (void *)data;
+ struct uart_hsu_port *up = chan->uport;
+ struct hsu_dma_buffer *dbuf = &up->rxbuf;
+ int count = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
+
+ if (!count) {
+ mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
+ goto exit;
+ }
+
+ hsu_dma_rx(up, 0);
+exit:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void hsu_global_init(void)
+{
+ struct hsu_port *hsu;
+ struct uart_hsu_port *uport;
+ struct hsu_dma_chan *dchan;
+ int i, ret;
+
+ hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL);
+ if (!hsu)
+ return;
+
+ /* Get basic io resource and map it */
+ hsu->paddr = 0xffa28000;
+ hsu->iolen = 0x1000;
+
+ if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global")))
+ pr_warning("HSU: error in request mem region\n");
+
+ hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen);
+ if (!hsu->reg) {
+ pr_err("HSU: error in ioremap\n");
+ ret = -ENOMEM;
+ goto err_free_region;
+ }
+
+ /* Initialise the 3 UART ports */
+ uport = hsu->port;
+ for (i = 0; i < 3; i++) {
+ uport->port.type = PORT_MFD;
+ uport->port.iotype = UPIO_MEM;
+ uport->port.mapbase = (resource_size_t)hsu->paddr
+ + HSU_PORT_REG_OFFSET
+ + i * HSU_PORT_REG_LENGTH;
+ uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET
+ + i * HSU_PORT_REG_LENGTH;
+
+ sprintf(uport->name, "hsu_port%d", i);
+ uport->port.fifosize = 64;
+ uport->port.ops = &serial_hsu_pops;
+ uport->port.line = i;
+ uport->port.flags = UPF_IOREMAP;
+ /* set the scalable maxim support rate to 2746800 bps */
+ uport->port.uartclk = 115200 * 24 * 16;
+
+ uport->running = 0;
+ uport->txc = &hsu->chans[i * 2];
+ uport->rxc = &hsu->chans[i * 2 + 1];
+
+ serial_hsu_ports[i] = uport;
+ uport->index = i;
+ uport++;
+ }
+
+ /* Initialise 6 dma channels */
+ dchan = hsu->chans;
+ for (i = 0; i < 6; i++) {
+ dchan->id = i;
+ dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ dchan->uport = &hsu->port[i/2];
+ dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
+ i * HSU_DMA_CHANS_REG_LENGTH;
+
+ /* Work around for RX */
+ if (dchan->dirt == DMA_FROM_DEVICE) {
+ init_timer(&dchan->rx_timer);
+ dchan->rx_timer.function = hsu_dma_rx_timeout;
+ dchan->rx_timer.data = (unsigned long)dchan;
+ }
+ dchan++;
+ }
+
+ phsu = hsu;
+
+ hsu_debugfs_init(hsu);
+ return;
+
+err_free_region:
+ release_mem_region(hsu->paddr, hsu->iolen);
+ kfree(hsu);
+ return;
+}
+
+static void serial_hsu_remove(struct pci_dev *pdev)
+{
+ struct hsu_port *hsu;
+ int i;
+
+ hsu = pci_get_drvdata(pdev);
+ if (!hsu)
+ return;
+
+ for (i = 0; i < 3; i++)
+ uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+
+ pci_set_drvdata(pdev, NULL);
+ free_irq(hsu->irq, hsu);
+ pci_disable_device(pdev);
+}
+
+/* First 3 are UART ports, and the 4th is the DMA */
+static const struct pci_device_id pci_ids[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) },
+ {},
+};
+
+static struct pci_driver hsu_pci_driver = {
+ .name = "HSU serial",
+ .id_table = pci_ids,
+ .probe = serial_hsu_probe,
+ .remove = __devexit_p(serial_hsu_remove),
+ .suspend = serial_hsu_suspend,
+ .resume = serial_hsu_resume,
+};
+
+static int __init hsu_pci_init(void)
+{
+ int ret;
+
+ hsu_global_init();
+
+ ret = uart_register_driver(&serial_hsu_reg);
+ if (ret)
+ return ret;
+
+ return pci_register_driver(&hsu_pci_driver);
+}
+
+static void __exit hsu_pci_exit(void)
+{
+ pci_unregister_driver(&hsu_pci_driver);
+ uart_unregister_driver(&serial_hsu_reg);
+
+ hsu_debugfs_remove(phsu);
+
+ kfree(phsu);
+}
+
+module_init(hsu_pci_init);
+module_exit(hsu_pci_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:medfield-hsu");
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 84a35f69901..8dedb266f14 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -113,7 +113,9 @@ struct psc_ops {
unsigned char (*read_char)(struct uart_port *port);
void (*cw_disable_ints)(struct uart_port *port);
void (*cw_restore_ints)(struct uart_port *port);
- unsigned long (*getuartclk)(void *p);
+ unsigned int (*set_baudrate)(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old);
int (*clock)(struct uart_port *port, int enable);
int (*fifoc_init)(void);
void (*fifoc_uninit)(void);
@@ -121,6 +123,16 @@ struct psc_ops {
irqreturn_t (*handle_irq)(struct uart_port *port);
};
+/* setting the prescaler and divisor reg is common for all chips */
+static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
+ u16 prescaler, unsigned int divisor)
+{
+ /* select prescaler */
+ out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
+ out_8(&psc->ctur, divisor >> 8);
+ out_8(&psc->ctlr, divisor & 0xff);
+}
+
#ifdef CONFIG_PPC_MPC52xx
#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -128,9 +140,6 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port)
struct mpc52xx_psc __iomem *psc = PSC(port);
struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
- /* /32 prescaler */
- out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-
out_8(&fifo->rfcntl, 0x00);
out_be16(&fifo->rfalarm, 0x1ff);
out_8(&fifo->tfcntl, 0x07);
@@ -219,15 +228,47 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
}
-/* Search for bus-frequency property in this node or a parent */
-static unsigned long mpc52xx_getuartclk(void *p)
+static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
{
- /*
- * 5200 UARTs have a / 32 prescaler
- * but the generic serial code assumes 16
- * so return ipb freq / 2
- */
- return mpc5xxx_get_bus_frequency(p) / 2;
+ unsigned int baud;
+ unsigned int divisor;
+
+ /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (32 * 0xffff) + 1,
+ port->uartclk / 32);
+ divisor = (port->uartclk + 16 * baud) / (32 * baud);
+
+ /* enable the /32 prescaler and set the divisor */
+ mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+ return baud;
+}
+
+static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ unsigned int divisor;
+ u16 prescaler;
+
+ /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
+ * ipb freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (32 * 0xffff) + 1,
+ port->uartclk / 4);
+ divisor = (port->uartclk + 2 * baud) / (4 * baud);
+
+ /* select the proper prescaler and set the divisor */
+ if (divisor > 0xffff) {
+ divisor = (divisor + 4) / 8;
+ prescaler = 0xdd00; /* /32 */
+ } else
+ prescaler = 0xff00; /* /4 */
+ mpc52xx_set_divisor(PSC(port), prescaler, divisor);
+ return baud;
}
static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
@@ -258,7 +299,28 @@ static struct psc_ops mpc52xx_psc_ops = {
.read_char = mpc52xx_psc_read_char,
.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
- .getuartclk = mpc52xx_getuartclk,
+ .set_baudrate = mpc5200_psc_set_baudrate,
+ .get_irq = mpc52xx_psc_get_irq,
+ .handle_irq = mpc52xx_psc_handle_irq,
+};
+
+static struct psc_ops mpc5200b_psc_ops = {
+ .fifo_init = mpc52xx_psc_fifo_init,
+ .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+ .rx_rdy = mpc52xx_psc_rx_rdy,
+ .tx_rdy = mpc52xx_psc_tx_rdy,
+ .tx_empty = mpc52xx_psc_tx_empty,
+ .stop_rx = mpc52xx_psc_stop_rx,
+ .start_tx = mpc52xx_psc_start_tx,
+ .stop_tx = mpc52xx_psc_stop_tx,
+ .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+ .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+ .write_char = mpc52xx_psc_write_char,
+ .read_char = mpc52xx_psc_read_char,
+ .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+ .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+ .set_baudrate = mpc5200b_psc_set_baudrate,
.get_irq = mpc52xx_psc_get_irq,
.handle_irq = mpc52xx_psc_handle_irq,
};
@@ -392,9 +454,35 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
}
-static unsigned long mpc512x_getuartclk(void *p)
+static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
{
- return mpc5xxx_get_bus_frequency(p);
+ unsigned int baud;
+ unsigned int divisor;
+
+ /*
+ * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
+ * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
+ * Furthermore, it states that "After reset, the prescaler by 10
+ * for the UART mode is selected", but the reset register value is
+ * 0x0000 which means a /32 prescaler. This is wrong.
+ *
+ * In reality using /32 prescaler doesn't work, as it is not supported!
+ * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
+ * Chapter 4.1 PSC in UART Mode.
+ * Calculate with a /16 prescaler here.
+ */
+
+ /* uartclk contains the ips freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (16 * 0xffff) + 1,
+ port->uartclk / 16);
+ divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+ /* enable the /16 prescaler and set the divisor */
+ mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+ return baud;
}
/* Init PSC FIFO Controller */
@@ -498,7 +586,7 @@ static struct psc_ops mpc512x_psc_ops = {
.read_char = mpc512x_psc_read_char,
.cw_disable_ints = mpc512x_psc_cw_disable_ints,
.cw_restore_ints = mpc512x_psc_cw_restore_ints,
- .getuartclk = mpc512x_getuartclk,
+ .set_baudrate = mpc512x_psc_set_baudrate,
.clock = mpc512x_psc_clock,
.fifoc_init = mpc512x_psc_fifoc_init,
.fifoc_uninit = mpc512x_psc_fifoc_uninit,
@@ -666,8 +754,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
unsigned char mr1, mr2;
- unsigned short ctr;
- unsigned int j, baud, quot;
+ unsigned int j;
+ unsigned int baud;
/* Prepare what we're gonna write */
mr1 = 0;
@@ -704,16 +792,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
mr2 |= MPC52xx_PSC_MODE_TXCTS;
}
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
- ctr = quot & 0xffff;
-
/* Get the lock */
spin_lock_irqsave(&port->lock, flags);
- /* Update the per-port timeout */
- uart_update_timeout(port, new->c_cflag, baud);
-
/* Do our best to flush TX & RX, so we don't lose anything */
/* But we don't wait indefinitely ! */
j = 5000000; /* Maximum wait */
@@ -737,8 +818,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
out_8(&psc->mode, mr1);
out_8(&psc->mode, mr2);
- out_8(&psc->ctur, ctr >> 8);
- out_8(&psc->ctlr, ctr & 0xff);
+ baud = psc_ops->set_baudrate(port, new, old);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, new->c_cflag, baud);
if (UART_ENABLE_MS(port, new->c_cflag))
mpc52xx_uart_enable_ms(port);
@@ -1118,7 +1201,7 @@ mpc52xx_console_setup(struct console *co, char *options)
return ret;
}
- uartclk = psc_ops->getuartclk(np);
+ uartclk = mpc5xxx_get_bus_frequency(np);
if (uartclk == 0) {
pr_debug("Could not find uart clock frequency!\n");
return -EINVAL;
@@ -1201,6 +1284,7 @@ static struct uart_driver mpc52xx_uart_driver = {
static struct of_device_id mpc52xx_uart_of_match[] = {
#ifdef CONFIG_PPC_MPC52xx
+ { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
{ .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
/* binding used by old lite5200 device trees: */
{ .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
@@ -1214,7 +1298,7 @@ static struct of_device_id mpc52xx_uart_of_match[] = {
};
static int __devinit
-mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
+mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match)
{
int idx = -1;
unsigned int uartclk;
@@ -1233,7 +1317,10 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
pr_debug("Found %s assigned to ttyPSC%x\n",
mpc52xx_uart_nodes[idx]->full_name, idx);
- uartclk = psc_ops->getuartclk(op->dev.of_node);
+ /* set the uart clock to the input clock of the psc, the different
+ * prescalers are taken into account in the set_baudrate() methods
+ * of the respective chip */
+ uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
if (uartclk == 0) {
dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
return -EINVAL;
@@ -1282,7 +1369,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
}
static int
-mpc52xx_uart_of_remove(struct of_device *op)
+mpc52xx_uart_of_remove(struct platform_device *op)
{
struct uart_port *port = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
@@ -1295,7 +1382,7 @@ mpc52xx_uart_of_remove(struct of_device *op)
#ifdef CONFIG_PM
static int
-mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state)
+mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
@@ -1306,7 +1393,7 @@ mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state)
}
static int
-mpc52xx_uart_of_resume(struct of_device *op)
+mpc52xx_uart_of_resume(struct platform_device *op)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
new file mode 100644
index 00000000000..f6ad1ecbff7
--- /dev/null
+++ b/drivers/serial/mrst_max3110.c
@@ -0,0 +1,844 @@
+/*
+ * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
+ *
+ * Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/*
+ * Note:
+ * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has
+ * 1 word. If SPI master controller doesn't support sclk frequency change,
+ * then the char need be sent out one by one with some delay
+ *
+ * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * interrupt for a low speed UART device
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <asm/atomic.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#include "mrst_max3110.h"
+
+#define PR_FMT "mrst_max3110: "
+
+#define UART_TX_NEEDED 1
+#define CON_TX_NEEDED 2
+#define BIT_IRQ_PENDING 3
+
+struct uart_max3110 {
+ struct uart_port port;
+ struct spi_device *spi;
+ char *name;
+
+ wait_queue_head_t wq;
+ struct task_struct *main_thread;
+ struct task_struct *read_thread;
+ struct mutex thread_mutex;;
+
+ u32 baud;
+ u16 cur_conf;
+ u8 clock;
+ u8 parity, word_7bits;
+
+ unsigned long uart_flags;
+
+ /* console related */
+ struct circ_buf con_xmit;
+
+ /* irq related */
+ u16 irq;
+};
+
+/* global data structure, may need be removed */
+struct uart_max3110 *pmax;
+static inline void receive_char(struct uart_max3110 *max, u8 ch);
+static void receive_chars(struct uart_max3110 *max,
+ unsigned char *str, int len);
+static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
+static void max3110_console_receive(struct uart_max3110 *max);
+
+int max3110_write_then_read(struct uart_max3110 *max,
+ const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
+{
+ struct spi_device *spi = max->spi;
+ struct spi_message message;
+ struct spi_transfer x;
+ int ret;
+
+ if (!txbuf || !rxbuf)
+ return -EINVAL;
+
+ spi_message_init(&message);
+ memset(&x, 0, sizeof x);
+ x.len = len;
+ x.tx_buf = txbuf;
+ x.rx_buf = rxbuf;
+ spi_message_add_tail(&x, &message);
+
+ if (always_fast)
+ x.speed_hz = 3125000;
+ else if (max->baud)
+ x.speed_hz = max->baud;
+
+ /* Do the i/o */
+ ret = spi_sync(spi, &message);
+ return ret;
+}
+
+/* Write a u16 to the device, and return one u16 read back */
+int max3110_out(struct uart_max3110 *max, const u16 out)
+{
+ u16 tmp;
+ int ret;
+
+ ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
+ if (ret)
+ return ret;
+
+ /* If some valid data is read back */
+ if (tmp & MAX3110_READ_DATA_AVAILABLE)
+ receive_char(max, (tmp & 0xff));
+
+ return ret;
+}
+
+#define MAX_READ_LEN 20
+/*
+ * This is usually used to read data from SPIC RX FIFO, which doesn't
+ * need any delay like flushing character out. It returns how many
+ * valide bytes are read back
+ */
+static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
+{
+ u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
+ u8 *pbuf, valid_str[MAX_READ_LEN];
+ int i, j, bytelen;
+
+ if (len > MAX_READ_LEN) {
+ pr_err(PR_FMT "read len %d is too large\n", len);
+ return 0;
+ }
+
+ bytelen = len * 2;
+ memset(out, 0, bytelen);
+ memset(in, 0, bytelen);
+
+ if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
+ return 0;
+
+ /* If caller don't provide a buffer, then handle received char */
+ pbuf = buf ? buf : valid_str;
+
+ for (i = 0, j = 0; i < len; i++) {
+ if (in[i] & MAX3110_READ_DATA_AVAILABLE)
+ pbuf[j++] = (u8)(in[i] & 0xff);
+ }
+
+ if (j && (pbuf == valid_str))
+ receive_chars(max, valid_str, j);
+
+ return j;
+}
+
+static void serial_m3110_con_putchar(struct uart_port *port, int ch)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ struct circ_buf *xmit = &max->con_xmit;
+
+ if (uart_circ_chars_free(xmit)) {
+ xmit->buf[xmit->head] = (char)ch;
+ xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
+ }
+
+
+ if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
+ wake_up_process(max->main_thread);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void serial_m3110_con_write(struct console *co,
+ const char *s, unsigned int count)
+{
+ if (!pmax)
+ return;
+
+ uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
+}
+
+static int __init
+serial_m3110_con_setup(struct console *co, char *options)
+{
+ struct uart_max3110 *max = pmax;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ pr_info(PR_FMT "setting up console\n");
+
+ if (!max) {
+ pr_err(PR_FMT "pmax is NULL, return");
+ return -ENODEV;
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&max->port, co, baud, parity, bits, flow);
+}
+
+static struct tty_driver *serial_m3110_con_device(struct console *co,
+ int *index)
+{
+ struct uart_driver *p = co->data;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+static struct uart_driver serial_m3110_reg;
+static struct console serial_m3110_console = {
+ .name = "ttyS",
+ .write = serial_m3110_con_write,
+ .device = serial_m3110_con_device,
+ .setup = serial_m3110_con_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_m3110_reg,
+};
+
+#define MRST_CONSOLE (&serial_m3110_console)
+
+static unsigned int serial_m3110_tx_empty(struct uart_port *port)
+{
+ return 1;
+}
+
+static void serial_m3110_stop_tx(struct uart_port *port)
+{
+ return;
+}
+
+/* stop_rx will be called in spin_lock env */
+static void serial_m3110_stop_rx(struct uart_port *port)
+{
+ return;
+}
+
+#define WORDS_PER_XFER 128
+static inline void send_circ_buf(struct uart_max3110 *max,
+ struct circ_buf *xmit)
+{
+ int len, left = 0;
+ u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
+ u8 valid_str[WORDS_PER_XFER];
+ int i, j;
+
+ while (!uart_circ_empty(xmit)) {
+ left = uart_circ_chars_pending(xmit);
+ while (left) {
+ len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
+
+ memset(obuf, 0, len * 2);
+ memset(ibuf, 0, len * 2);
+ for (i = 0; i < len; i++) {
+ obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ }
+ max3110_write_then_read(max, (u8 *)obuf,
+ (u8 *)ibuf, len * 2, 0);
+
+ for (i = 0, j = 0; i < len; i++) {
+ if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
+ valid_str[j++] = (u8)(ibuf[i] & 0xff);
+ }
+
+ if (j)
+ receive_chars(max, valid_str, j);
+
+ max->port.icount.tx += len;
+ left -= len;
+ }
+ }
+}
+
+static void transmit_char(struct uart_max3110 *max)
+{
+ struct uart_port *port = &max->port;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ send_circ_buf(max, xmit);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ serial_m3110_stop_tx(port);
+}
+
+/* This will be called by uart_write() and tty_write, can't
+ * go to sleep */
+static void serial_m3110_start_tx(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+
+ if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
+ wake_up_process(max->main_thread);
+}
+
+static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
+{
+ struct uart_port *port = &max->port;
+ struct tty_struct *tty;
+ int usable;
+
+ /* If uart is not opened, just return */
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return; /* receive some char before the tty is opened */
+
+ while (len) {
+ usable = tty_buffer_request_room(tty, len);
+ if (usable) {
+ tty_insert_flip_string(tty, str, usable);
+ str += usable;
+ port->icount.rx += usable;
+ tty_flip_buffer_push(tty);
+ }
+ len -= usable;
+ }
+}
+
+static inline void receive_char(struct uart_max3110 *max, u8 ch)
+{
+ receive_chars(max, &ch, 1);
+}
+
+static void max3110_console_receive(struct uart_max3110 *max)
+{
+ int loop = 1, num, total = 0;
+ u8 recv_buf[512], *pbuf;
+
+ pbuf = recv_buf;
+ do {
+ num = max3110_read_multi(max, 8, pbuf);
+
+ if (num) {
+ loop = 10;
+ pbuf += num;
+ total += num;
+
+ if (total >= 500) {
+ receive_chars(max, recv_buf, total);
+ pbuf = recv_buf;
+ total = 0;
+ }
+ }
+ } while (--loop);
+
+ if (total)
+ receive_chars(max, recv_buf, total);
+}
+
+static int max3110_main_thread(void *_max)
+{
+ struct uart_max3110 *max = _max;
+ wait_queue_head_t *wq = &max->wq;
+ int ret = 0;
+ struct circ_buf *xmit = &max->con_xmit;
+
+ init_waitqueue_head(wq);
+ pr_info(PR_FMT "start main thread\n");
+
+ do {
+ wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop());
+
+ mutex_lock(&max->thread_mutex);
+
+ if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
+ max3110_console_receive(max);
+
+ /* first handle console output */
+ if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
+ send_circ_buf(max, xmit);
+
+ /* handle uart output */
+ if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags))
+ transmit_char(max);
+
+ mutex_unlock(&max->thread_mutex);
+
+ } while (!kthread_should_stop());
+
+ return ret;
+}
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
+{
+ struct uart_max3110 *max = dev_id;
+
+ /* max3110's irq is a falling edge, not level triggered,
+ * so no need to disable the irq */
+ if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
+ wake_up_process(max->main_thread);
+
+ return IRQ_HANDLED;
+}
+#else
+/* if don't use RX IRQ, then need a thread to polling read */
+static int max3110_read_thread(void *_max)
+{
+ struct uart_max3110 *max = _max;
+
+ pr_info(PR_FMT "start read thread\n");
+ do {
+ mutex_lock(&max->thread_mutex);
+ max3110_console_receive(max);
+ mutex_unlock(&max->thread_mutex);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ / 20);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+#endif
+
+static int serial_m3110_startup(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ u16 config = 0;
+ int ret = 0;
+
+ if (port->line != 0)
+ pr_err(PR_FMT "uart port startup failed\n");
+
+ /* firstly disable all IRQ and config it to 115200, 8n1 */
+ config = WC_TAG | WC_FIFO_ENABLE
+ | WC_1_STOPBITS
+ | WC_8BIT_WORD
+ | WC_BAUD_DR2;
+ ret = max3110_out(max, config);
+
+ /* as we use thread to handle tx/rx, need set low latency */
+ port->state->port.tty->low_latency = 1;
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ ret = request_irq(max->irq, serial_m3110_irq,
+ IRQ_TYPE_EDGE_FALLING, "max3110", max);
+ if (ret)
+ return ret;
+
+ /* enable RX IRQ only */
+ config |= WC_RXA_IRQ_ENABLE;
+ max3110_out(max, config);
+#else
+ /* if IRQ is disabled, start a read thread for input data */
+ max->read_thread =
+ kthread_run(max3110_read_thread, max, "max3110_read");
+#endif
+
+ max->cur_conf = config;
+ return 0;
+}
+
+static void serial_m3110_shutdown(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ u16 config;
+
+ if (max->read_thread) {
+ kthread_stop(max->read_thread);
+ max->read_thread = NULL;
+ }
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ free_irq(max->irq, max);
+#endif
+
+ /* Disable interrupts from this port */
+ config = WC_TAG | WC_SW_SHDI;
+ max3110_out(max, config);
+}
+
+static void serial_m3110_release_port(struct uart_port *port)
+{
+}
+
+static int serial_m3110_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_m3110_config_port(struct uart_port *port, int flags)
+{
+ /* give it fake type */
+ port->type = PORT_PXA;
+}
+
+static int
+serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+
+static const char *serial_m3110_type(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ return max->name;
+}
+
+static void
+serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ unsigned char cval;
+ unsigned int baud, parity = 0;
+ int clk_div = -1;
+ u16 new_conf = max->cur_conf;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ new_conf |= WC_7BIT_WORD;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ new_conf |= WC_8BIT_WORD;
+ break;
+ }
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+
+ /* first calc the div for 1.8MHZ clock case */
+ switch (baud) {
+ case 300:
+ clk_div = WC_BAUD_DR384;
+ break;
+ case 600:
+ clk_div = WC_BAUD_DR192;
+ break;
+ case 1200:
+ clk_div = WC_BAUD_DR96;
+ break;
+ case 2400:
+ clk_div = WC_BAUD_DR48;
+ break;
+ case 4800:
+ clk_div = WC_BAUD_DR24;
+ break;
+ case 9600:
+ clk_div = WC_BAUD_DR12;
+ break;
+ case 19200:
+ clk_div = WC_BAUD_DR6;
+ break;
+ case 38400:
+ clk_div = WC_BAUD_DR3;
+ break;
+ case 57600:
+ clk_div = WC_BAUD_DR2;
+ break;
+ case 115200:
+ clk_div = WC_BAUD_DR1;
+ break;
+ case 230400:
+ if (max->clock & MAX3110_HIGH_CLK)
+ break;
+ default:
+ /* pick the previous baud rate */
+ baud = max->baud;
+ clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+ if (max->clock & MAX3110_HIGH_CLK) {
+ clk_div += 1;
+ /* high clk version max3110 doesn't support B300 */
+ if (baud == 300)
+ baud = 600;
+ if (baud == 230400)
+ clk_div = WC_BAUD_DR1;
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+ new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
+ if (termios->c_cflag & CSTOPB)
+ new_conf |= WC_2_STOPBITS;
+ else
+ new_conf &= ~WC_2_STOPBITS;
+
+ if (termios->c_cflag & PARENB) {
+ new_conf |= WC_PARITY_ENABLE;
+ parity |= UART_LCR_PARITY;
+ } else
+ new_conf &= ~WC_PARITY_ENABLE;
+
+ if (!(termios->c_cflag & PARODD))
+ parity |= UART_LCR_EPAR;
+ max->parity = parity;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ new_conf |= WC_TAG;
+ if (new_conf != max->cur_conf) {
+ max3110_out(max, new_conf);
+ max->cur_conf = new_conf;
+ max->baud = baud;
+ }
+}
+
+/* don't handle hw handshaking */
+static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void serial_m3110_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static void serial_m3110_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+}
+
+static void serial_m3110_enable_ms(struct uart_port *port)
+{
+}
+
+struct uart_ops serial_m3110_ops = {
+ .tx_empty = serial_m3110_tx_empty,
+ .set_mctrl = serial_m3110_set_mctrl,
+ .get_mctrl = serial_m3110_get_mctrl,
+ .stop_tx = serial_m3110_stop_tx,
+ .start_tx = serial_m3110_start_tx,
+ .stop_rx = serial_m3110_stop_rx,
+ .enable_ms = serial_m3110_enable_ms,
+ .break_ctl = serial_m3110_break_ctl,
+ .startup = serial_m3110_startup,
+ .shutdown = serial_m3110_shutdown,
+ .set_termios = serial_m3110_set_termios, /* must have */
+ .pm = serial_m3110_pm,
+ .type = serial_m3110_type,
+ .release_port = serial_m3110_release_port,
+ .request_port = serial_m3110_request_port,
+ .config_port = serial_m3110_config_port,
+ .verify_port = serial_m3110_verify_port,
+};
+
+static struct uart_driver serial_m3110_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "MRST serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 1,
+ .cons = MRST_CONSOLE,
+};
+
+static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
+{
+ return 0;
+}
+
+static int serial_m3110_resume(struct spi_device *spi)
+{
+ return 0;
+}
+
+static struct dw_spi_chip spi0_uart = {
+ .poll_mode = 1,
+ .enable_dma = 0,
+ .type = SPI_FRF_SPI,
+};
+
+static int serial_m3110_probe(struct spi_device *spi)
+{
+ struct uart_max3110 *max;
+ int ret;
+ unsigned char *buffer;
+ u16 res;
+ max = kzalloc(sizeof(*max), GFP_KERNEL);
+ if (!max)
+ return -ENOMEM;
+
+ /* set spi info */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 16;
+ max->clock = MAX3110_HIGH_CLK;
+ spi->controller_data = &spi0_uart;
+
+ spi_setup(spi);
+
+ max->port.type = PORT_PXA; /* need apply for a max3110 type */
+ max->port.fifosize = 2; /* only have 16b buffer */
+ max->port.ops = &serial_m3110_ops;
+ max->port.line = 0;
+ max->port.dev = &spi->dev;
+ max->port.uartclk = 115200;
+
+ max->spi = spi;
+ max->name = spi->modalias; /* use spi name as the name */
+ max->irq = (u16)spi->irq;
+
+ mutex_init(&max->thread_mutex);
+
+ max->word_7bits = 0;
+ max->parity = 0;
+ max->baud = 0;
+
+ max->cur_conf = 0;
+ max->uart_flags = 0;
+
+ /* Check if reading configuration register returns something sane */
+
+ res = RC_TAG;
+ ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
+ if (ret < 0 || res == 0 || res == 0xffff) {
+ printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
+ res);
+ ret = -ENODEV;
+ goto err_get_page;
+ }
+ buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+ if (!buffer) {
+ ret = -ENOMEM;
+ goto err_get_page;
+ }
+ max->con_xmit.buf = (unsigned char *)buffer;
+ max->con_xmit.head = max->con_xmit.tail = 0;
+
+ max->main_thread = kthread_run(max3110_main_thread,
+ max, "max3110_main");
+ if (IS_ERR(max->main_thread)) {
+ ret = PTR_ERR(max->main_thread);
+ goto err_kthread;
+ }
+
+ pmax = max;
+ /* give membase a psudo value to pass serial_core's check */
+ max->port.membase = (void *)0xff110000;
+ uart_add_one_port(&serial_m3110_reg, &max->port);
+
+ return 0;
+
+err_kthread:
+ free_page((unsigned long)buffer);
+err_get_page:
+ pmax = NULL;
+ kfree(max);
+ return ret;
+}
+
+static int max3110_remove(struct spi_device *dev)
+{
+ struct uart_max3110 *max = pmax;
+
+ if (!pmax)
+ return 0;
+
+ pmax = NULL;
+ uart_remove_one_port(&serial_m3110_reg, &max->port);
+
+ free_page((unsigned long)max->con_xmit.buf);
+
+ if (max->main_thread)
+ kthread_stop(max->main_thread);
+
+ kfree(max);
+ return 0;
+}
+
+static struct spi_driver uart_max3110_driver = {
+ .driver = {
+ .name = "spi_max3111",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = serial_m3110_probe,
+ .remove = __devexit_p(max3110_remove),
+ .suspend = serial_m3110_suspend,
+ .resume = serial_m3110_resume,
+};
+
+
+int __init serial_m3110_init(void)
+{
+ int ret = 0;
+
+ ret = uart_register_driver(&serial_m3110_reg);
+ if (ret)
+ return ret;
+
+ ret = spi_register_driver(&uart_max3110_driver);
+ if (ret)
+ uart_unregister_driver(&serial_m3110_reg);
+
+ return ret;
+}
+
+void __exit serial_m3110_exit(void)
+{
+ spi_unregister_driver(&uart_max3110_driver);
+ uart_unregister_driver(&serial_m3110_reg);
+}
+
+module_init(serial_m3110_init);
+module_exit(serial_m3110_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("max3110-uart");
diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h
new file mode 100644
index 00000000000..363478acb2c
--- /dev/null
+++ b/drivers/serial/mrst_max3110.h
@@ -0,0 +1,59 @@
+#ifndef _MRST_MAX3110_H
+#define _MRST_MAX3110_H
+
+#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */
+#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */
+
+/* status bits for all 4 MAX3110 operate modes */
+#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
+#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
+
+#define WC_TAG (3 << 14)
+#define RC_TAG (1 << 14)
+#define WD_TAG (2 << 14)
+#define RD_TAG (0 << 14)
+
+/* bits def for write configuration */
+#define WC_FIFO_ENABLE_MASK (1 << 13)
+#define WC_FIFO_ENABLE (0 << 13)
+
+#define WC_SW_SHDI (1 << 12)
+
+#define WC_IRQ_MASK (0xF << 8)
+#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
+#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */
+#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
+#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
+
+#define WC_IRDA_ENABLE (1 << 7)
+
+#define WC_STOPBITS_MASK (1 << 6)
+#define WC_2_STOPBITS (1 << 6)
+#define WC_1_STOPBITS (0 << 6)
+
+#define WC_PARITY_ENABLE_MASK (1 << 5)
+#define WC_PARITY_ENABLE (1 << 5)
+
+#define WC_WORDLEN_MASK (1 << 4)
+#define WC_7BIT_WORD (1 << 4)
+#define WC_8BIT_WORD (0 << 4)
+
+#define WC_BAUD_DIV_MASK (0xF)
+#define WC_BAUD_DR1 (0x0)
+#define WC_BAUD_DR2 (0x1)
+#define WC_BAUD_DR4 (0x2)
+#define WC_BAUD_DR8 (0x3)
+#define WC_BAUD_DR16 (0x4)
+#define WC_BAUD_DR32 (0x5)
+#define WC_BAUD_DR64 (0x6)
+#define WC_BAUD_DR128 (0x7)
+#define WC_BAUD_DR3 (0x8)
+#define WC_BAUD_DR6 (0x9)
+#define WC_BAUD_DR12 (0xA)
+#define WC_BAUD_DR24 (0xB)
+#define WC_BAUD_DR48 (0xC)
+#define WC_BAUD_DR96 (0xD)
+#define WC_BAUD_DR192 (0xE)
+#define WC_BAUD_DR384 (0xF)
+
+#endif
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa96f28..de173671e3d 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
- /* wait for transmitter to become emtpy */
+ /* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
cpu_relax();
@@ -344,7 +344,7 @@ int nwpserial_register_port(struct uart_port *port)
mutex_lock(&nwpserial_mutex);
- dn = to_of_device(port->dev)->dev.of_node;
+ dn = port->dev->of_node;
if (dn == NULL)
goto out;
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index a48d9080f55..659a695bdad 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -27,7 +27,7 @@ struct of_serial_info {
/*
* Fill a struct uart_port for a given device node
*/
-static int __devinit of_platform_serial_setup(struct of_device *ofdev,
+static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
int type, struct uart_port *port)
{
struct resource resource;
@@ -80,7 +80,7 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev,
/*
* Try to register a serial port
*/
-static int __devinit of_platform_serial_probe(struct of_device *ofdev,
+static int __devinit of_platform_serial_probe(struct platform_device *ofdev,
const struct of_device_id *id)
{
struct of_serial_info *info;
@@ -134,7 +134,7 @@ out:
/*
* Release a line
*/
-static int of_platform_serial_remove(struct of_device *ofdev)
+static int of_platform_serial_remove(struct platform_device *ofdev)
{
struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
switch (info->type) {
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 4a789e5361a..6ebccd70a70 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -28,8 +28,12 @@
static int s5pv210_serial_setsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
+ struct s3c2410_uartcfg *cfg = port->dev->platform_data;
unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ if ((cfg->clocks_size) == 1)
+ return 0;
+
if (strcmp(clk->name, "pclk") == 0)
ucon &= ~S5PV210_UCON_CLKMASK;
else if (strcmp(clk->name, "uclk1") == 0)
@@ -47,10 +51,14 @@ static int s5pv210_serial_setsource(struct uart_port *port,
static int s5pv210_serial_getsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
+ struct s3c2410_uartcfg *cfg = port->dev->platform_data;
u32 ucon = rd_regl(port, S3C2410_UCON);
clk->divisor = 1;
+ if ((cfg->clocks_size) == 1)
+ return 0;
+
switch (ucon & S5PV210_UCON_CLKMASK) {
case S5PV210_UCON_PCLK:
clk->name = "pclk";
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index a9d6c5626a0..b1156ba8ad1 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -705,8 +705,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (ourport->info->has_divslot) {
unsigned int div = ourport->baudclk_rate / baud;
- udivslot = udivslot_table[div & 15];
- dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ if (cfg->has_fracval) {
+ udivslot = (div & 15);
+ dbg("fracval = %04x\n", udivslot);
+ } else {
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
}
switch (termios->c_cflag & CSIZE) {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 7f283070951..cd8511298bc 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -58,9 +58,9 @@ static struct lock_class_key port_lock_key;
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state,
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
struct ktermios *old_termios);
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
+static void __uart_wait_until_sent(struct uart_port *port, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
/*
@@ -137,7 +137,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
* Startup the port. This will be called once per open. All calls
* will be serialised by the per-port mutex.
*/
-static int uart_startup(struct uart_state *state, int init_hw)
+static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
@@ -152,7 +152,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
* once we have successfully opened the port. Also set
* up the tty->alt_speed kludge
*/
- set_bit(TTY_IO_ERROR, &port->tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
if (uport->type == PORT_UNKNOWN)
return 0;
@@ -177,26 +177,26 @@ static int uart_startup(struct uart_state *state, int init_hw)
/*
* Initialise the hardware port settings.
*/
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
/*
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (port->tty->termios->c_cflag & CBAUD)
+ if (tty->termios->c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
if (port->flags & ASYNC_CTS_FLOW) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
- port->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
spin_unlock_irq(&uport->lock);
}
set_bit(ASYNCB_INITIALIZED, &port->flags);
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
}
if (retval && capable(CAP_SYS_ADMIN))
@@ -210,11 +210,10 @@ static int uart_startup(struct uart_state *state, int init_hw)
* DTR is dropped if the hangup on close termio flag is on. Calls to
* uart_shutdown are serialised by the per-port semaphore.
*/
-static void uart_shutdown(struct uart_state *state)
+static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
- struct tty_struct *tty = port->tty;
/*
* Set the TTY IO error marker
@@ -430,11 +429,10 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
EXPORT_SYMBOL(uart_get_divisor);
/* FIXME: Consistent locking policy */
-static void
-uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
+ struct ktermios *old_termios)
{
struct tty_port *port = &state->port;
- struct tty_struct *tty = port->tty;
struct uart_port *uport = state->uart_port;
struct ktermios *termios;
@@ -463,8 +461,8 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
uport->ops->set_termios(uport, termios, old_termios);
}
-static inline int
-__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c)
+static inline int __uart_put_char(struct uart_port *port,
+ struct circ_buf *circ, unsigned char c)
{
unsigned long flags;
int ret = 0;
@@ -494,8 +492,8 @@ static void uart_flush_chars(struct tty_struct *tty)
uart_start(tty);
}
-static int
-uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int uart_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
@@ -675,7 +673,7 @@ static int uart_get_info(struct uart_state *state,
return 0;
}
-static int uart_set_info(struct uart_state *state,
+static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
struct serial_struct __user *newinfo)
{
struct serial_struct new_serial;
@@ -770,7 +768,7 @@ static int uart_set_info(struct uart_state *state,
* We need to shutdown the serial port at the old
* port/type/irq combination.
*/
- uart_shutdown(state);
+ uart_shutdown(tty, state);
}
if (change_port) {
@@ -869,25 +867,27 @@ static int uart_set_info(struct uart_state *state,
"is deprecated.\n", current->comm,
tty_name(port->tty, buf));
}
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
}
} else
- retval = uart_startup(state, 1);
+ retval = uart_startup(tty, state, 1);
exit:
mutex_unlock(&port->mutex);
return retval;
}
-
-/*
- * uart_get_lsr_info - get line status register info.
- * Note: uart_ioctl protects us against hangups.
+/**
+ * uart_get_lsr_info - get line status register info
+ * @tty: tty associated with the UART
+ * @state: UART being queried
+ * @value: returned modem value
+ *
+ * Note: uart_ioctl protects us against hangups.
*/
-static int uart_get_lsr_info(struct uart_state *state,
- unsigned int __user *value)
+static int uart_get_lsr_info(struct tty_struct *tty,
+ struct uart_state *state, unsigned int __user *value)
{
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
unsigned int result;
result = uport->ops->tx_empty(uport);
@@ -900,7 +900,7 @@ static int uart_get_lsr_info(struct uart_state *state,
*/
if (uport->x_char ||
((uart_circ_chars_pending(&state->xmit) > 0) &&
- !port->tty->stopped && !port->tty->hw_stopped))
+ !tty->stopped && !tty->hw_stopped))
result &= ~TIOCSER_TEMT;
return put_user(result, value);
@@ -961,7 +961,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state)
return 0;
}
-static int uart_do_autoconfig(struct uart_state *state)
+static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
@@ -980,7 +980,7 @@ static int uart_do_autoconfig(struct uart_state *state)
ret = -EBUSY;
if (tty_port_users(port) == 1) {
- uart_shutdown(state);
+ uart_shutdown(tty, state);
/*
* If we already have a port type configured,
@@ -999,7 +999,7 @@ static int uart_do_autoconfig(struct uart_state *state)
*/
uport->ops->config_port(uport, flags);
- ret = uart_startup(state, 1);
+ ret = uart_startup(tty, state, 1);
}
mutex_unlock(&port->mutex);
return ret;
@@ -1122,11 +1122,11 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
break;
case TIOCSSERIAL:
- ret = uart_set_info(state, uarg);
+ ret = uart_set_info(tty, state, uarg);
break;
case TIOCSERCONFIG:
- ret = uart_do_autoconfig(state);
+ ret = uart_do_autoconfig(tty, state);
break;
case TIOCSERGWILD: /* obsolete */
@@ -1172,7 +1172,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
*/
switch (cmd) {
case TIOCSERGETLSR: /* Get line status register */
- ret = uart_get_lsr_info(state, uarg);
+ ret = uart_get_lsr_info(tty, state, uarg);
break;
default: {
@@ -1194,7 +1194,7 @@ static void uart_set_ldisc(struct tty_struct *tty)
struct uart_port *uport = state->uart_port;
if (uport->ops->set_ldisc)
- uport->ops->set_ldisc(uport);
+ uport->ops->set_ldisc(uport, tty->termios->c_line);
}
static void uart_set_termios(struct tty_struct *tty,
@@ -1219,7 +1219,7 @@ static void uart_set_termios(struct tty_struct *tty,
return;
}
- uart_change_speed(state, old_termios);
+ uart_change_speed(tty, state, old_termios);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
@@ -1272,8 +1272,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
struct uart_state *state = tty->driver_data;
struct tty_port *port;
struct uart_port *uport;
+ unsigned long flags;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
if (!state)
return;
@@ -1284,9 +1285,12 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
pr_debug("uart_close(%d) called\n", uport->line);
mutex_lock(&port->mutex);
+ spin_lock_irqsave(&port->lock, flags);
- if (tty_hung_up_p(filp))
+ if (tty_hung_up_p(filp)) {
+ spin_unlock_irqrestore(&port->lock, flags);
goto done;
+ }
if ((tty->count == 1) && (port->count != 1)) {
/*
@@ -1305,8 +1309,10 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
tty->name, port->count);
port->count = 0;
}
- if (port->count)
+ if (port->count) {
+ spin_unlock_irqrestore(&port->lock, flags);
goto done;
+ }
/*
* Now we wait for the transmit buffer to clear; and we notify
@@ -1314,9 +1320,18 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* setting tty->closing.
*/
tty->closing = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ /*
+ * hack: open-coded tty_wait_until_sent to avoid
+ * recursive tty_lock
+ */
+ long timeout = msecs_to_jiffies(port->closing_wait);
+ if (wait_event_interruptible_timeout(tty->write_wait,
+ !tty_chars_in_buffer(tty), timeout) >= 0)
+ __uart_wait_until_sent(uport, timeout);
+ }
/*
* At this point, we stop accepting input. To do this, we
@@ -1332,45 +1347,47 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
- uart_wait_until_sent(tty, uport->timeout);
+ __uart_wait_until_sent(uport, uport->timeout);
}
- uart_shutdown(state);
+ uart_shutdown(tty, state);
uart_flush_buffer(tty);
tty_ldisc_flush(tty);
- tty->closing = 0;
tty_port_tty_set(port, NULL);
+ spin_lock_irqsave(&port->lock, flags);
+ tty->closing = 0;
if (port->blocked_open) {
+ spin_unlock_irqrestore(&port->lock, flags);
if (port->close_delay)
msleep_interruptible(port->close_delay);
+ spin_lock_irqsave(&port->lock, flags);
} else if (!uart_console(uport)) {
+ spin_unlock_irqrestore(&port->lock, flags);
uart_change_pm(state, 3);
+ spin_lock_irqsave(&port->lock, flags);
}
/*
* Wake up anyone trying to open this port.
*/
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
done:
mutex_unlock(&port->mutex);
}
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+static void __uart_wait_until_sent(struct uart_port *port, int timeout)
{
- struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->uart_port;
unsigned long char_time, expire;
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
return;
- lock_kernel();
-
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1416,7 +1433,16 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
set_current_state(TASK_RUNNING); /* might not be needed */
- unlock_kernel();
+}
+
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->uart_port;
+
+ tty_lock();
+ __uart_wait_until_sent(port, timeout);
+ tty_unlock();
}
/*
@@ -1429,16 +1455,19 @@ static void uart_hangup(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct tty_port *port = &state->port;
+ unsigned long flags;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
pr_debug("uart_hangup(%d)\n", state->uart_port->line);
mutex_lock(&port->mutex);
if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
- uart_shutdown(state);
+ uart_shutdown(tty, state);
+ spin_lock_irqsave(&port->lock, flags);
port->count = 0;
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ spin_unlock_irqrestore(&port->lock, flags);
tty_port_tty_set(port, NULL);
wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&port->delta_msr_wait);
@@ -1446,15 +1475,19 @@ static void uart_hangup(struct tty_struct *tty)
mutex_unlock(&port->mutex);
}
-/*
- * Copy across the serial console cflag setting into the termios settings
- * for the initial open of the port. This allows continuity between the
- * kernel settings, and the settings init adopts when it opens the port
- * for the first time.
+/**
+ * uart_update_termios - update the terminal hw settings
+ * @tty: tty associated with UART
+ * @state: UART to update
+ *
+ * Copy across the serial console cflag setting into the termios settings
+ * for the initial open of the port. This allows continuity between the
+ * kernel settings, and the settings init adopts when it opens the port
+ * for the first time.
*/
-static void uart_update_termios(struct uart_state *state)
+static void uart_update_termios(struct tty_struct *tty,
+ struct uart_state *state)
{
- struct tty_struct *tty = state->port.tty;
struct uart_port *port = state->uart_port;
if (uart_console(port) && port->cons->cflag) {
@@ -1471,7 +1504,7 @@ static void uart_update_termios(struct uart_state *state)
/*
* Make termios settings take effect.
*/
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
/*
* And finally enable the RTS and DTR signals.
@@ -1481,90 +1514,37 @@ static void uart_update_termios(struct uart_state *state)
}
}
-/*
- * Block the open until the port is ready. We must be called with
- * the per-port semaphore held.
- */
-static int
-uart_block_til_ready(struct file *filp, struct uart_state *state)
+static int uart_carrier_raised(struct tty_port *port)
{
- DECLARE_WAITQUEUE(wait, current);
+ struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
- unsigned int mctrl;
-
- port->blocked_open++;
- port->count--;
-
- add_wait_queue(&port->open_wait, &wait);
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- /*
- * If we have been hung up, tell userspace/restart open.
- */
- if (tty_hung_up_p(filp) || port->tty == NULL)
- break;
-
- /*
- * If the port has been closed, tell userspace/restart open.
- */
- if (!(port->flags & ASYNC_INITIALIZED))
- break;
+ int mctrl;
+ spin_lock_irq(&uport->lock);
+ uport->ops->enable_ms(uport);
+ mctrl = uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
+ if (mctrl & TIOCM_CAR)
+ return 1;
+ return 0;
+}
- /*
- * If non-blocking mode is set, or CLOCAL mode is set,
- * we don't want to wait for the modem status lines to
- * indicate that the port is ready.
- *
- * Also, if the port is not enabled/configured, we want
- * to allow the open to succeed here. Note that we will
- * have set TTY_IO_ERROR for a non-existant port.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (port->tty->termios->c_cflag & CLOCAL) ||
- (port->tty->flags & (1 << TTY_IO_ERROR)))
- break;
+static void uart_dtr_rts(struct tty_port *port, int onoff)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
- /*
- * Set DTR to allow modem to know we're waiting. Do
- * not set RTS here - we want to make sure we catch
- * the data from the modem.
- */
- if (port->tty->termios->c_cflag & CBAUD)
- uart_set_mctrl(uport, TIOCM_DTR);
+ if (onoff) {
+ uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
/*
- * and wait for the carrier to indicate that the
- * modem is ready for us.
+ * If this is the first open to succeed,
+ * adjust things to suit.
*/
- spin_lock_irq(&uport->lock);
- uport->ops->enable_ms(uport);
- mctrl = uport->ops->get_mctrl(uport);
- spin_unlock_irq(&uport->lock);
- if (mctrl & TIOCM_CAR)
- break;
-
- mutex_unlock(&port->mutex);
- schedule();
- mutex_lock(&port->mutex);
-
- if (signal_pending(current))
- break;
+ if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags))
+ uart_update_termios(port->tty, state);
}
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
-
- port->count++;
- port->blocked_open--;
-
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if (!port->tty || tty_hung_up_p(filp))
- return -EAGAIN;
-
- return 0;
+ else
+ uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}
static struct uart_state *uart_get(struct uart_driver *drv, int line)
@@ -1611,7 +1591,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
struct tty_port *port;
int retval, line = tty->index;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
pr_debug("uart_open(%d) called\n", line);
/*
@@ -1668,23 +1648,14 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* Start up the serial port.
*/
- retval = uart_startup(state, 0);
+ retval = uart_startup(tty, state, 0);
/*
* If we succeeded, wait until the port is ready.
*/
- if (retval == 0)
- retval = uart_block_til_ready(filp, state);
mutex_unlock(&port->mutex);
-
- /*
- * If this is the first open to succeed, adjust things to suit.
- */
- if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
- set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
-
- uart_update_termios(state);
- }
+ if (retval == 0)
+ retval = tty_port_block_til_ready(port, tty, filp);
fail:
return retval;
@@ -2010,9 +1981,13 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
struct tty_port *port = &state->port;
struct device *tty_dev;
struct uart_match match = {uport, drv};
+ struct tty_struct *tty;
mutex_lock(&port->mutex);
+ /* Must be inside the mutex lock until we convert to tty_port */
+ tty = port->tty;
+
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
@@ -2105,9 +2080,12 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
if (console_suspend_enabled || !uart_console(uport)) {
+ /* Protected by port mutex for now */
+ struct tty_struct *tty = port->tty;
ret = ops->startup(uport);
if (ret == 0) {
- uart_change_speed(state, NULL);
+ if (tty)
+ uart_change_speed(tty, state, NULL);
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, uport->mctrl);
ops->start_tx(uport);
@@ -2119,7 +2097,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
* Clear the "initialized" flag so we won't try
* to call the low level drivers shutdown method.
*/
- uart_shutdown(state);
+ uart_shutdown(tty, state);
}
}
@@ -2312,6 +2290,11 @@ static const struct tty_operations uart_ops = {
#endif
};
+static const struct tty_port_operations uart_port_ops = {
+ .carrier_raised = uart_carrier_raised,
+ .dtr_rts = uart_dtr_rts,
+};
+
/**
* uart_register_driver - register a driver with the uart core layer
* @drv: low level driver structure
@@ -2368,6 +2351,7 @@ int uart_register_driver(struct uart_driver *drv)
struct tty_port *port = &state->port;
tty_port_init(port);
+ port->ops = &uart_port_ops;
port->close_delay = 500; /* .5 seconds */
port->closing_wait = 30000; /* 30 seconds */
tasklet_init(&state->tlet, uart_tasklet_action,
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ab17c08ddc0..141c69554bd 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -45,7 +45,6 @@
#include <asm/io.h>
#include <asm/system.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
@@ -115,16 +114,14 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
static int quirk_post_ibm(struct pcmcia_device *link)
{
- conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+ u8 val;
int ret;
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_read_config_byte(link, 0x800, &val);
if (ret)
goto failed;
- reg.Action = CS_WRITE;
- reg.Value = reg.Value | 1;
- ret = pcmcia_access_configuration_register(link, &reg);
+ ret = pcmcia_write_config_byte(link, 0x800, val | 1);
if (ret)
goto failed;
return 0;
@@ -338,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -427,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Vpp =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ p_dev->io_lines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
&& (cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -EINVAL;
@@ -449,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -466,13 +464,13 @@ static int simple_config(struct pcmcia_device *link)
/* If the card is already configured, look up the port and irq */
if (link->function_config) {
unsigned int port = 0;
- if ((link->io.BasePort2 != 0) &&
- (link->io.NumPorts2 == 8)) {
- port = link->io.BasePort2;
+ if ((link->resource[1]->end != 0) &&
+ (resource_size(link->resource[1]) == 8)) {
+ port = link->resource[1]->end;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
- (link->io.NumPorts1 == 0x40)) {
- port = link->io.BasePort1 + 0x28;
+ (resource_size(link->resource[0]) == 0x40)) {
+ port = link->resource[0]->start + 0x28;
info->slave = 1;
}
if (info->slave) {
@@ -510,7 +508,7 @@ found_port:
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
return -1;
- return setup_serial(link, info, link->io.BasePort1, link->irq);
+ return setup_serial(link, info, link->resource[0]->start, link->irq);
}
static int multi_config_check(struct pcmcia_device *p_dev,
@@ -524,10 +522,10 @@ static int multi_config_check(struct pcmcia_device *p_dev,
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io)) {
- *base2 = p_dev->io.BasePort1 + 8;
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev)) {
+ *base2 = p_dev->resource[0]->start + 8;
return 0;
}
}
@@ -543,11 +541,11 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
int *base2 = priv_data;
if (cf->io.nwin == 2) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.BasePort2 = cf->io.win[1].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io)) {
- *base2 = p_dev->io.BasePort2;
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[1]->start = cf->io.win[1].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev)) {
+ *base2 = p_dev->resource[1]->start;
return 0;
}
}
@@ -560,10 +558,10 @@ static int multi_config(struct pcmcia_device *link)
int i, base2 = 0;
/* First, look for a generic full-sized window */
- link->io.NumPorts1 = info->multi * 8;
+ link->resource[0]->end = info->multi * 8;
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
- link->io.NumPorts1 = link->io.NumPorts2 = 8;
+ link->resource[0]->end = link->resource[1]->end = 8;
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
@@ -599,9 +597,9 @@ static int multi_config(struct pcmcia_device *link)
link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq);
- base2 = link->io.BasePort1;
+ base2 = link->resource[0]->start;;
} else {
- err = setup_serial(link, info, link->io.BasePort1,
+ err = setup_serial(link, info, link->resource[0]->start,
link->irq);
}
info->c950ctrl = base2;
@@ -616,7 +614,7 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
- setup_serial(link, info, link->io.BasePort1, link->irq);
+ setup_serial(link, info, link->resource[0]->start, link->irq);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 5f90fcd7d10..c291b3add1d 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -346,6 +346,27 @@ static int scif_rxfill(struct uart_port *port)
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
+#elif defined(CONFIG_ARCH_SH7372)
+static int scif_txfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) >> 8;
+ else
+ return sci_in(port, SCTFDR);
+}
+
+static int scif_txroom(struct uart_port *port)
+{
+ return port->fifosize - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+ else
+ return sci_in(port, SCRFDR);
+}
#else
static int scif_txfill(struct uart_port *port)
{
@@ -683,7 +704,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
u16 ssr = sci_in(port, SCxSR);
/* Disable future Rx interrupts */
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
disable_irq_nosync(irq);
scr |= 0x4000;
} else {
@@ -928,7 +949,7 @@ static void sci_dma_tx_complete(void *arg)
if (!uart_circ_empty(xmit)) {
schedule_work(&s->work_tx);
- } else if (port->type == PORT_SCIFA) {
+ } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
}
@@ -1184,7 +1205,7 @@ static void sci_start_tx(struct uart_port *port)
unsigned short ctrl;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 new, scr = sci_in(port, SCSCR);
if (s->chan_tx)
new = scr | 0x8000;
@@ -1197,7 +1218,7 @@ static void sci_start_tx(struct uart_port *port)
s->cookie_tx < 0)
schedule_work(&s->work_tx);
#endif
- if (!s->chan_tx || port->type == PORT_SCIFA) {
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
@@ -1210,7 +1231,7 @@ static void sci_stop_tx(struct uart_port *port)
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
@@ -1222,7 +1243,7 @@ static void sci_start_rx(struct uart_port *port)
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl |= sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
sci_out(port, SCSCR, ctrl);
}
@@ -1233,7 +1254,7 @@ static void sci_stop_rx(struct uart_port *port)
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
@@ -1271,7 +1292,7 @@ static void rx_timer_fn(unsigned long arg)
struct uart_port *port = &s->port;
u16 scr = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
enable_irq(s->irqs[1]);
}
@@ -1524,6 +1545,8 @@ static const char *sci_type(struct uart_port *port)
return "scif";
case PORT_SCIFA:
return "scifa";
+ case PORT_SCIFB:
+ return "scifb";
}
return NULL;
@@ -1612,6 +1635,9 @@ static int __devinit sci_init_single(struct platform_device *dev,
port->line = index;
switch (p->type) {
+ case PORT_SCIFB:
+ port->fifosize = 256;
+ break;
case PORT_SCIFA:
port->fifosize = 64;
break;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index eb7ef4951e0..d2352ac437c 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -330,7 +330,7 @@
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_IN(scif_size, scif_offset) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_IN(sci_size, sci_offset); \
@@ -338,7 +338,7 @@
} \
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_OUT(scif_size, scif_offset, value) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_OUT(sci_size, sci_offset, value); \
@@ -392,8 +392,12 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+ CPU_SCIF_FNS(name, scif_offset, scif_size)
+#elif defined(CONFIG_ARCH_SH7372)
+#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \
+ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -430,8 +434,7 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -444,6 +447,20 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+#elif defined(CONFIG_ARCH_SH7372)
+SCIF_FNS(SCSMR, 0x00, 16)
+SCIF_FNS(SCBRR, 0x04, 8)
+SCIF_FNS(SCSCR, 0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 16)
+SCIF_FNS(SCFER, 0x10, 16)
+SCIF_FNS(SCxSR, 0x14, 16)
+SCIF_FNS(SCFCR, 0x18, 16)
+SCIF_FNS(SCFDR, 0x1c, 16)
+SCIF_FNS(SCTFDR, 0x38, 16)
+SCIF_FNS(SCRFDR, 0x3c, 16)
+SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
+SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
+SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0cd3dc..7e5e5efea4e 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 890f9174296..c9014868297 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -519,13 +519,13 @@ static struct console sunhv_console = {
.data = &sunhv_reg,
};
-static int __devinit hv_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match)
{
struct uart_port *port;
unsigned long minor;
int err;
- if (op->irqs[0] == 0xffffffff)
+ if (op->archdata.irqs[0] == 0xffffffff)
return -ENODEV;
port = kzalloc(sizeof(struct uart_port), GFP_KERNEL);
@@ -557,7 +557,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
port->membase = (unsigned char __iomem *) __pa(port);
- port->irq = op->irqs[0];
+ port->irq = op->archdata.irqs[0];
port->dev = &op->dev;
@@ -598,7 +598,7 @@ out_free_port:
return err;
}
-static int __devexit hv_remove(struct of_device *dev)
+static int __devexit hv_remove(struct platform_device *dev)
{
struct uart_port *port = dev_get_drvdata(&dev->dev);
@@ -644,12 +644,12 @@ static int __init sunhv_init(void)
if (tlb_type != hypervisor)
return -ENODEV;
- return of_register_driver(&hv_driver, &of_bus_type);
+ return of_register_platform_driver(&hv_driver);
}
static void __exit sunhv_exit(void)
{
- of_unregister_driver(&hv_driver);
+ of_unregister_platform_driver(&hv_driver);
}
module_init(sunhv_init);
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 5e81bc6b48b..5b246b18f42 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options)
printk("Console: ttyS%d (SAB82532)\n",
(sunsab_reg.minor - 64) + con->index);
- sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
+ sunserial_console_termios(con, up->port.dev->of_node);
switch (con->cflag & CBAUD) {
case B150: baud = 150; break;
@@ -954,7 +954,7 @@ static inline struct console *SUNSAB_CONSOLE(void)
#endif
static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
- struct of_device *op,
+ struct platform_device *op,
unsigned long offset,
int line)
{
@@ -969,7 +969,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
return -ENOMEM;
up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
- up->port.irq = op->irqs[0];
+ up->port.irq = op->archdata.irqs[0];
up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
up->port.iotype = UPIO_MEM;
@@ -1006,7 +1006,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
return 0;
}
-static int __devinit sab_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match)
{
static int inst;
struct uart_sunsab_port *up;
@@ -1062,7 +1062,7 @@ out:
return err;
}
-static int __devexit sab_remove(struct of_device *op)
+static int __devexit sab_remove(struct platform_device *op)
{
struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
@@ -1130,12 +1130,12 @@ static int __init sunsab_init(void)
}
}
- return of_register_driver(&sab_driver, &of_bus_type);
+ return of_register_platform_driver(&sab_driver);
}
static void __exit sunsab_exit(void)
{
- of_unregister_driver(&sab_driver);
+ of_unregister_platform_driver(&sab_driver);
if (sunsab_reg.nr) {
sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index ffbf4553f66..551ebfe3ccb 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1200,7 +1200,7 @@ static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up)
return -ENODEV;
printk("%s: %s port at %llx, irq %u\n",
- to_of_device(up->port.dev)->dev.of_node->full_name,
+ up->port.dev->of_node->full_name,
(up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
(unsigned long long) up->port.mapbase,
up->port.irq);
@@ -1352,7 +1352,7 @@ static int __init sunsu_console_setup(struct console *co, char *options)
spin_lock_init(&port->lock);
/* Get firmware console settings. */
- sunserial_console_termios(co, to_of_device(port->dev)->dev.of_node);
+ sunserial_console_termios(co, port->dev->of_node);
memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = co->cflag;
@@ -1406,7 +1406,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp)
return SU_PORT_PORT;
}
-static int __devinit su_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match)
{
static int inst;
struct device_node *dp = op->dev.of_node;
@@ -1443,7 +1443,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
return -ENOMEM;
}
- up->port.irq = op->irqs[0];
+ up->port.irq = op->archdata.irqs[0];
up->port.dev = &op->dev;
@@ -1497,7 +1497,7 @@ out_unmap:
return err;
}
-static int __devexit su_remove(struct of_device *op)
+static int __devexit su_remove(struct platform_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
bool kbdms = false;
@@ -1586,7 +1586,7 @@ static int __init sunsu_init(void)
return err;
}
- err = of_register_driver(&su_driver, &of_bus_type);
+ err = of_register_platform_driver(&su_driver);
if (err && num_uart)
sunserial_unregister_minors(&sunsu_reg, num_uart);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index f9a24f4ebb3..c1967ac1c07 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1230,7 +1230,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
(sunzilog_reg.minor - 64) + con->index, con->index);
/* Get firmware console settings. */
- sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
+ sunserial_console_termios(con, up->port.dev->of_node);
/* Firmware console speed is limited to 150-->38400 baud so
* this hackish cflag thing is OK.
@@ -1399,7 +1399,7 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
static int zilog_irq = -1;
-static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match)
{
static int kbm_inst, uart_inst;
int inst;
@@ -1426,7 +1426,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
rp = sunzilog_chip_regs[inst];
if (zilog_irq == -1)
- zilog_irq = op->irqs[0];
+ zilog_irq = op->archdata.irqs[0];
up = &sunzilog_port_table[inst * 2];
@@ -1434,7 +1434,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
up[0].port.mapbase = op->resource[0].start + 0x00;
up[0].port.membase = (void __iomem *) &rp->channelA;
up[0].port.iotype = UPIO_MEM;
- up[0].port.irq = op->irqs[0];
+ up[0].port.irq = op->archdata.irqs[0];
up[0].port.uartclk = ZS_CLOCK;
up[0].port.fifosize = 1;
up[0].port.ops = &sunzilog_pops;
@@ -1451,7 +1451,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
up[1].port.mapbase = op->resource[0].start + 0x04;
up[1].port.membase = (void __iomem *) &rp->channelB;
up[1].port.iotype = UPIO_MEM;
- up[1].port.irq = op->irqs[0];
+ up[1].port.irq = op->archdata.irqs[0];
up[1].port.uartclk = ZS_CLOCK;
up[1].port.fifosize = 1;
up[1].port.ops = &sunzilog_pops;
@@ -1492,12 +1492,12 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
"is a %s\n",
dev_name(&op->dev),
(unsigned long long) up[0].port.mapbase,
- op->irqs[0], sunzilog_type(&up[0].port));
+ op->archdata.irqs[0], sunzilog_type(&up[0].port));
printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
"is a %s\n",
dev_name(&op->dev),
(unsigned long long) up[1].port.mapbase,
- op->irqs[0], sunzilog_type(&up[1].port));
+ op->archdata.irqs[0], sunzilog_type(&up[1].port));
kbm_inst++;
}
@@ -1516,7 +1516,7 @@ static void __devexit zs_remove_one(struct uart_sunzilog_port *up)
uart_remove_one_port(&sunzilog_reg, &up->port);
}
-static int __devexit zs_remove(struct of_device *op)
+static int __devexit zs_remove(struct platform_device *op)
{
struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
struct zilog_layout __iomem *regs;
@@ -1576,7 +1576,7 @@ static int __init sunzilog_init(void)
goto out_free_tables;
}
- err = of_register_driver(&zs_driver, &of_bus_type);
+ err = of_register_platform_driver(&zs_driver);
if (err)
goto out_unregister_uart;
@@ -1604,7 +1604,7 @@ out:
return err;
out_unregister_driver:
- of_unregister_driver(&zs_driver);
+ of_unregister_platform_driver(&zs_driver);
out_unregister_uart:
if (num_sunzilog) {
@@ -1619,7 +1619,7 @@ out_free_tables:
static void __exit sunzilog_exit(void)
{
- of_unregister_driver(&zs_driver);
+ of_unregister_platform_driver(&zs_driver);
if (zilog_irq != -1) {
struct uart_sunzilog_port *up = sunzilog_irq_chain;
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 67ca642713b..1f36b7eb735 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -423,7 +423,7 @@ static struct uart_driver timbuart_driver = {
.nr = 1
};
-static int timbuart_probe(struct platform_device *dev)
+static int __devinit timbuart_probe(struct platform_device *dev)
{
int err, irq;
struct timbuart_port *uart;
@@ -489,7 +489,7 @@ err_mem:
return err;
}
-static int timbuart_remove(struct platform_device *dev)
+static int __devexit timbuart_remove(struct platform_device *dev)
{
struct timbuart_port *uart = platform_get_drvdata(dev);
@@ -507,7 +507,7 @@ static struct platform_driver timbuart_platform_driver = {
.owner = THIS_MODULE,
},
.probe = timbuart_probe,
- .remove = timbuart_remove,
+ .remove = __devexit_p(timbuart_remove),
};
/*--------------------------------------------------------------------------*/
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 8acccd56437..9b03d7b3e45 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -21,6 +21,7 @@
#include <asm/io.h>
#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
@@ -583,7 +584,7 @@ static struct platform_driver ulite_platform_driver = {
*/
#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
static int __devinit
-ulite_of_probe(struct of_device *op, const struct of_device_id *match)
+ulite_of_probe(struct platform_device *op, const struct of_device_id *match)
{
struct resource res;
const unsigned int *id;
@@ -604,7 +605,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
}
-static int __devexit ulite_of_remove(struct of_device *op)
+static int __devexit ulite_of_remove(struct platform_device *op)
{
return ulite_release(&op->dev);
}
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 907b06f5c44..3f4848e2174 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1194,7 +1194,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
release_firmware(fw);
}
-static int ucc_uart_probe(struct of_device *ofdev,
+static int ucc_uart_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->dev.of_node;
@@ -1462,7 +1462,7 @@ static int ucc_uart_probe(struct of_device *ofdev,
return 0;
}
-static int ucc_uart_remove(struct of_device *ofdev)
+static int ucc_uart_remove(struct platform_device *ofdev)
{
struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);